Sharp MX M283N User Manual

							2-109
COPIER
Contents
4
Touch the [OK] key.
You will return to the special modes screen. Touch the [OK] key 
to return to the base screen of copy mode.
5
Press the [START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 
then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
 The original must be placed on the document glass.
 Overlap of sections of image
- There will be a margin around the edges of each copy.
- Areas for overlapping the copies will be created at the leading and trailing edges of each copy.
 If an original size is selected first, a message will appear indicating the enlargement sizes that can be selected. If an 
enlargement size is selected first, a message will appear indicating the original sizes that can be selected.
 If a combination of settings is selected for which multi-page enlargement is not possible, invalid selection beeps will sound.
 The paper size, number of sheets required for the enlarged image, and the ratio are automatically selected based on the 
selected original size and enlargement size.
(The paper size and ratio cannot be selected manually.)
 If no paper trays have the size of paper that was automatically selected, Load XXX paper will appear. Change the paper 
in one of the trays or the bypass tray to the indicated size of paper.
To cancel the multi-page enlargement setting...
Touch the [Cancel] key in the screen of step 2.
Although the multi-page enlargement setting is cancelled, the ratio selected automatically is kept valid.
To return the ratio to 100%...
To return the ratio setting to 100%, touch the [Copy Ratio] key to display the ratio menu and then touch the [100%] key.
Original Orientation
OK
OKCancelBorder Print
Image Edit
Multi-Page Enlargement
Original Size13A2
A4A1
A0
A0x2
A5
A3
Enlargement Size
(A Size)
Downloaded From ManualsPrinter.com Manuals 
						

							2-110
COPIER
Contents
REVERSING THE IMAGE (Mirror Image)
This feature is used to make a copy that is a mirror image of the original.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-104)
3
Select Mirror Image.
(1) Touch the [Mirror Image] key so that it is 
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.
4
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you have 
selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then touch the 
[Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
To cancel a mirror image setting...
Touch the [Mirror Image] key in the screen of step 3 so that it is not highlighted.
Original Mirror image copy
OK
Mirror
ImageMulti-Page
Enlargement
CentringA3
Full Bleed
Photo Repeat
OKSpecial Modes
Image Edit
(1)(2)
Downloaded From ManualsPrinter.com Manuals 
						

							2-111
COPIER
Contents
COPYING A3 (11 x 17) ORIGINALS WITH NO EDGE 
CUT-OFF (A3 (11 x 17) Full Bleed)
This feature lets you copy an entire A3 (11 x 17) size original at full size with no image cut-off at the edges.
A3W (12 x 18) size paper is used, which is slightly larger than A3 (11 x 17) size.
1
Place the original face down on the 
document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-104)
3
Select A3 (11x17) Full Bleed.
(1) Touch the [A3 Full Bleed] or [11x17 Full 
Bleed] key so that it is highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.
A3 (11 x 17) size originalA3 (12 x 18) full bleed copy
OK
Mirror
ImageMulti-Page
Enlargement
CentringA3
Full Bleed
Photo Repeat
Special Modes
Image Edit
OK
(1)(2)
Downloaded From ManualsPrinter.com Manuals 
						

							2-112
COPIER
Contents
4
Place A3W (12 x 18) paper in the 
bypass tray.
Pull out the extension tray, adjust the guides to the width of 
A3W (12 x 18) paper, and place the paper in the bypass tray.
After loading the paper, configure the bypass tray settings as 
explained in MAKING COPIES USING THE BYPASS TRAY 
(page 2-38).
5
Press the [START] key.
Copying will begin.
If you have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and 
then touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
 To use this function, one of the following output devices must be installed;
Exit tray unit, Finisher, Finisher (large stacker), Saddle stitch finisher
 The original must be placed on the document glass.
 The copy ratio is 100% when this function is used. The ratio cannot be changed.
 The staple, paper folding, and punch function cannot be used.
To cancel A3 (11x17) Full Bleed...
Touch the [A3 Full Bleed] or [11x17 Full Bleed] key in the screen of step 3 so that it is not highlighted.
Downloaded From ManualsPrinter.com Manuals 
						

							2-113
COPIER
Contents
COPYING IN THE CENTRE OF THE PAPER (Centring)
This is used to centre the copied image on the paper.
This lets you place the image in the centre of the paper when the original size is smaller than the paper size or when the 
image is reduced.
Not using the centring functionUsing the centring function
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Image Edit] key.
☞[Image Edit] KEY (page 2-104)
3
Select Centring.
(1) Touch the [Centring] key so that it is 
highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.
4
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
OK
Mirror
ImageMulti-Page
Enlargement
Centring
Photo Repeat
Special Modes
Image Edit
A3
Full Bleed
OK
(1)(2)
Downloaded From ManualsPrinter.com Manuals 
						

							2-114
COPIER
Contents
 The image can be reduced when using the centring function, but not enlarged.
 When the original size or the paper size is displayed as a special size, this function cannot be used.
To cancel centring...
Touch the [Centring] key in the screen of step 3 so that it is not highlighted.
Downloaded From ManualsPrinter.com Manuals 
						

							2-115
COPIER
Contents
ADJUSTING THE SHARPNESS OF AN 
IMAGE (Sharpness)
This is used to sharpen an image or make it softer.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select the special modes.
(1) Touch the [Special Modes] key.
(2) Touch the   keys to switch through the screens.
(3) Touch the [Sharpness] key.
3
Adjust the image.
(1) Touch the [Soft] key or the [Sharp] key so 
that it is highlighted.
(2) Touch the [OK] key.
You will return to the special modes screen. Touch the 
[OK] key to return to the base screen of copy mode.
4
Press the [START] key.
Copying will begin.
If you are using the document glass to copy multiple original pages, copying will take place as you scan each original. If you 
have selected sort mode, change originals and press the [START] key. Repeat until all pages have been scanned and then 
touch the [Read-End] key.
To cancel scanning and copying...
Press the [STOP] key ( ).
When this function is selected, the exposure adjustment setting automatically changes to manual adjustment. 
Automatic exposure adjustment cannot be selected.
To cancel the sharpness setting...
Touch the [Cancel] key in the screen of step 3.
Soft
Sharp
OK
OKCancel
Special Modes
Sharpness
SharpSoft
(1)(2)
Downloaded From ManualsPrinter.com Manuals 
						

							2-116
COPIER
Contents
CHECKING COPIES BEFORE PRINTING
(Proof Copy)
This feature prints only one set of copies, regardless of how many sets have been specified. After the first set is checked 
for errors, the remaining sets can be printed. Previously it was necessary to re-scan the original each time changes to 
settings were required. However, this feature makes it possible to change settings for the scanned original without 
scanning it again, allowing you perform copying more efficiently.
1
Place the original.
Place the original face up in the document feeder tray, or face down on the document glass.
2
Select copy settings in the base screen.
3
Select Proof Copy.
(1) Touch the [Special Modes] key.
☞SPECIAL MODES (page 2-41)
(2) Touch the   keys to switch through the 
screens.
(3) Touch the [Proof Copy] key so that it is 
highlighted.
(4) Touch the [OK] key.
AAAA
AAAA
AAAAAAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
AAAA
If OK
After adjustments are 
made, 1 set is printed 
for you to checkThe remaining 4 sets 
are printed
Adjust the 
settings
If OK 1 set of copies is 
printed for you to 
check Proof Copy is 
selected and 5 sets of 
copies are executedThe remaining 4 
sets are printed
Special Modes
22
OK
Image Edit
Quick FileProof Copy
Sharpness
Slow Scan
ModeOriginal 
CountMixed Size
Original
Stamp
File
(4)(2)(3)
Downloaded From ManualsPrinter.com Manuals 
						

							2-117
COPIER
Contents
4
Set the number of copies (number of 
sets) with the numeric keys.
If you will copy multiple originals using the document glass, 
switch to sort mode after this step.
☞Sort mode (page 2-33)
Up to 999 copies (sets) can be set.
If an incorrect number of copies is set...
Press the [CLEAR] key ( ) and then enter the correct number.
5
Press the [START] key.
One set of copies is printed.
If you are using the document glass to copy multiple originals, change originals and press the [START] key. Repeat until all 
pages have been scanned and then touch the [Read-End] key. One set of copies will be printed.
To cancel copying...
Press the [STOP] key ( ).
6
Check the printed set of copies. If the 
copies are acceptable, touch the [End] 
key. If you need to change the settings, 
touch the [Change] key.
When the [End] key is touched, the remaining sets are printed.
If you touched the [Change] key, go to the next step.
To cancel copying...
Press the [STOP] key ( ).
Plain
7
A4
Special Modes
2-Sided Copy
EndChange
Press [End] to continue.
To make a proof copy again, press
[Start].
Downloaded From ManualsPrinter.com Manuals 
						

							2-118
COPIER
Contents
7
Change the settings.
(1) Touch the key of the setting that you want 
to change.
The setting screen of the touched key opens. Change the 
settings and touch the [OK] key.
(2) Touch the [OK] key.
 To change the number of sets printed, set the desired number of copies (sets) with the numeric keys. After changing 
the number of sets, touch the [End] key in the touch panel (not the [START] key) to print the sets.
 Special modes that can be adjusted are Margin Shift, Pamphlet Copy, Tandem Copy, Covers/Inserts, Transparency 
Inserts, Multi-Shot, and Stamp.
 For Pamphlet Copy, Covers/Inserts, and Multi Shot, only changes to the settings of the functions can be made; the 
functions cannot be newly added or deleted.
 When transparency film is used, the settings can be changed, new settings can be added, and the function can be 
cancelled. However, this is not possible when pamphlet copying is enabled.
8
Press the [START] key.
One set of copies is printed again using the adjusted settings. Check the results. If further adjustments are needed, repeat 
steps 6 through 8. (Repeating Proof Copy does not decrease the remaining number of sets to be printed.)
9
Touch the [End] key.
You will return to the base screen of copy mode and the 
remaining sets will be printed.
To cancel scanning and copying...
Press the [STOP] key ( ).
If Proof Copy is executed while the machine is printing another job, the other job is interrupted and the proof copies are 
printed. The previous job will resume after the proof copies are printed.
However, if proof copy is executed during output of a job for which both two-sided printing and stapling are enabled, the proof 
copy will be output after the job in progress is finished. 
If the [End] key is touched to execute printing of the remaining sets while the machine is printing another job, the remaining 
sets will be printed after all previously reserved jobs are completed.
2-Sided CopyOutputPaper Select
Special Modes
OKProof Copy
(2)(1)
EndChange
Press [End] to continue.
To make a proof copy again, press
[Start].
Downloaded From ManualsPrinter.com Manuals