Sharp Mx 3501 N Manual

65
Resending to unsuccessful destinations
The results of a completed broadcast transmission can be checked in the job status screen. If transmission to any of the 
destinations failed, resend the image to those destinations.
1
Press the [JOB STATUS] key.
2
Touch the [Complete] key.
If the job status screen of fax mode does not appear, touch the 
[Fax Job] key.
3
Display details on the broadcast 
transmission.
(1) Touch the key of the completed broadcast 
transmission.
(2) Touch the [Detail] key.
4
Resend...

66
SENDING A FAX AT A SPECIFIED TIME (Timer)
When this function is used, transmission takes place automatically at a specified time.
The timer transmission function makes it easy to perform reserved transmissions, broadcast transmissions and other 
transmissions at night or other times when phone rates are low.
A timer setting can also be specified for polling reception to receive a fax when you are not present.
 When timer transmission is set, always keep the main power switch in the On position....

67
3
Touch the [Timer] key.
4
Set the time with the   keys.
(1) Specify the day.
If you do not wish to specify a day, select [---]. In this 
case, transmission will begin when the time specified in 
(2) arrives.
(2) Specify the time (hour, minute)
Select the time in 24-hour format.
(3) Touch the [OK] key.
 When this screen is opened, the setting will show the current time. If the time is not correct, press the [CLEAR ALL] 
key ( ) to cancel the operation. Correct the time in the system settings and then...

68
6
Press the [BLACK & WHITE START] key 
().
Scanning begins.
 If you inserted the original pages in the document feeder 
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
 If you are scanning the original on the document glass, scan 
each page one page at a time.
When scanning finishes, place the next original and press 
the [BLACK & WHITE START] key ( ). Repeat until all 
pages have been scanned and then press the [Read-End] 
key.
A beep will sound to indicate...

69
ERASING PERIPHERAL SHADOWS ON THE 
IMAGE (Erase)
The erase function is used to erase shadows on images produced when scanning thick originals or books.
Scanning a thick book
Erase modes
Shadows appear here.
Not using the erase 
functionUsing the erase 
function
Shadows appear in the 
image.No shadows appear.
1
Place the original.
Place an original that cannot be inserted in the document 
feeder tray face down on the document glass.
If the original can be placed in the document feeder tray, place 
it...

70
3
Touch the [Erase] key.
4
Select the erase settings.
(1) Touch the desired erase mode.
Select one of the three erase modes.
(2) Set the erasure width with  .
0 to 1 (0 mm to 20 mm) can be entered.
(3) Touch the [OK] key.
Touch the [OK] key next to the [Cancel] key to complete the settings. You will return to step 3.
5
Enter the destination fax number.
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired 
destination.
(3) Touch the [To] key.
☞CALLING UP A FAX NUMBER FROM THE...

71
6
Press the [BLACK & WHITE START] key 
().
Scanning begins.
 If you inserted the original pages in the document feeder 
tray, all pages are scanned.
A beep will sound to indicate that scanning is finished.
 If you are scanning the original on the document glass, scan 
each page one page at a time.
When scanning finishes, place the next original and press 
the [BLACK & WHITE START] key ( ). Repeat until all 
pages have been scanned and then press the [Read-End] 
key.
A beep will sound to indicate...

72
TRANSMITTING AN ORIGINAL AS TWO 
SEPARATE PAGES (Dual Page Scan)
The left and right sides of an original can be transmitted as two separate pages. This function is useful when you wish to 
fax the left and right pages of a book or other bound document as separate pages.
Faxing the left and right pages of a book
Original scan sizeTransmitted image
11 x 17 (A3) x 1 page8-1/2 x 11 (A4) x 2 pages
 When using dual page scan, the original must be placed on the document glass.
 The send size cannot be...

73
3
Select Dual Page Scan.
(1) Touch the [Dual Page Scan] key so that it is 
highlighted.
(2) Touch the [OK] key.
4
Enter the destination fax number.
(1) Touch the [Address Book] key.
(2) Touch the one-touch key of the desired 
destination.
(3) Touch the [To] key.
☞CALLING UP A FAX NUMBER FROM THE ADDRESS 
BOOK (page 36)
If the fax number of the transmitting machine is not stored in the 
Address Book, enter the fax number with the numeric keys.
☞ENTERING A FAX NUMBER WITH THE NUMERIC KEYS  
(page 35)...

74
 To erase shadows caused by the binding of a book or other bound document, use the erase function. (Note, however, that 
Center Erase and Edge + Center Erase cannot be used.)
 This function cannot be used in combination with the following functions:
2in1, Card Shot, Job Build Mode, Mixed Size Original
To cancel Dual Page Scan...
Touch the [Dual Page Scan] key in the screen of step 3.