Samsung T4069F LN TFT LCD Television User Manual

							English - 
Connecting a DVD Player or Cable box/Satellite receiver (Set-Top box) via Component cables
The rear panel jacks on your TV make it easy to connect a DVD Player or Cable Box/Satellite receiver (Set-Top Box) to your TV.
1.	 Connect a Component   
   Cable between the     COMPONENT IN (1 or 2)     [Y, PB, PR] jacks on the TV      and the COMPONENT     [Y, PB, PR]  jacks on the        DVD Player or Cable Box/Satellite receiver (Set-Top 
Box).
2.	 Connect Audio Cables  
   between the COMPONENT    IN(1 or 2) [R-AUDIO-L]     jacks on the TV and the       AUDIO OUT jacks on the  
DVD Player or Cable Box/
Satellite receiver (Set-Top 
Box).
Component video separates the video into Y (Luminance (brightness), Pb (Blue) and    Pr (Red) for enhanced video quality.  Be sure to match the component video and audio connections.   For example, if connecting the video cable to COMPONENT IN, connect the audio cable    to COMPONENT IN also.  Each DVD Player or Cable Box/Satellite receiver (Set-Top Box) has a different back panel 
configuration.
 When connecting a DVD Player or Cable Box/Satellite receiver (Set-Top Box), match the color 
of the connection terminal to the cable.
DVD Player or Cable box / Satellite receiver (Set-Top box)
TV Rear Panel
Component Cable (Not supplied)1
Audio Cable (Not supplied)2
Connecting a Camcorder 
The side panel jacks on your TV make it easy to connect a camcorder to your TV. 
They allow you to view the camcorder tapes without using a VCR
1.	 	Connect a Video Cable   
(or S-Video Cable) between   
the AV IN2 [VIDEO]   
(or S-VIDEO) jack on the 
TV and the VIDEO OUT 
jack on the camcorder.
2.	 Connect Audio Cables   
   between the AV IN2    [R-AUDIO-L]  jacks on the     TV and the AUDIO OUT     jacks on the camcorder.
Camcorder TV Side PanelS-Video Cable (Not supplied)1
Audio Cable (Not supplied)2
Each Camcorder has a different back panel configuration. When connecting a Camcorder, match the color of the connection terminal to the cable.
Video Cable (Not supplied)1or
BN68-01310B-00Eng.indd   92007-09-14   �� 4:11:04 
						

							English - 10
Connecting a VCR
These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the 
instructions on pages 6-7). Skip step 1 if you have not yet connected t\
o an antenna or a cable system. 
1.	 Unplug the cable or antenna   
   from the back of the TV.
2.	Connect the cable or antenna     to the ANT IN terminal on the    back of the VCR.
3.	Connect an RF Cable between      the ANT OUT terminal on the        VCR and the ANT 1 IN (AIR) or      ANT 2 IN (CABLE) terminal on      the TV.
4.	Connect a Video Cable        between the VIDEO OUT jack        on the VCR and the AV IN 1    (or AV IN 2) [VIDEO] jack on     the TV.
5.	Connect Audio Cables        between the AUDIO OUT        jacks on the VCR and the        AV IN 1 (or AV IN 2)    [R-AUDIO-L] jacks on the TV.
  If you have a “mono”        (non-stereo) VCR, use a       Y-connector (not supplied)       to hook up to the right       and left audio input jacks       of the TV. If your VCR       is stereo, you must       connect two cables.
Follow the instructions in “Viewing a VCR or Camcorder Tape” to view your VCR tape.  Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.
TV Rear Panel
RF Cable (Not supplied)

VCR Rear Panel
2Video Cable (Not supplied)4
Audio Cable (Not supplied)
Your Samsung TV can be connected to an S-Video jack of a VCR.  
(This connection delivers a better picture when compared to the regular\
 Video connection above.)
1.	 To begin, follow steps 1–3    in the previous section to    connect the antenna or    cable to your VCR and    your TV.
2.	Connect an S-Video Cable     between the S-VIDEO OUT    jack on the VCR and the    AV IN1 [S-VIDEO] jack on    the TV.
3.	Connect Audio Cables     between the AUDIO OUT    jacks on the VCR and the    AV IN1 [R-AUDIO-L] jacks    on the TV.
An S-Video cable may be included with a VCR. (If not, check your local electronics store.)
Each VCR has a different back panel configuration. When connecting a VCR, match the color of the connection terminal to the cable.
VCR Rear Panel
RF Cable (Not supplied)
1
Audio Cable (Not supplied)
TV Rear Panel
S-Video Cable (Not supplied)
2
Video Connection
S-Video Connection
ANT 1 IN (AIR) ANT 2 IN(CAbLE)
BN68-01310B-00Eng.indd   102007-09-14   �� 4:11:05 
						

							Connecting an Amplifier/DVD Home Theater
1.	Connect Audio Cables      between the AUDIO OUT       [R-AUDIO-L] jacks on the TV and AUDIO IN [R-AUDIO-L] 
jacks  on the Amplifier/DVD 
Home Theater.
   When an audio amplifier is     connected to the "AUDIO     OUT [R-AUDIO-L]"     jack: Decrease the     volume of the TV and adjust     the volume level with the    Amplifier’s volume control.
Amplifier/DVD Home Theater TV Rear Panel
Audio Cable (Not supplied)
Each Amplifier/DVD Home Theater has a different back panel configuration. When connecting an Amplifier/DVD Home Theater, match the color of the connection    terminal to the cable.
English - 11
Connecting a Digital Audio System
1.	 Connect an Optical Cable     between the “DIGITAL    AUDIO OUT (OPTICAL)”    jacks on the TV and the    Digital Audio Input jacks on    the Digital Audio System.
   When a Digital Audio    System is connected to the    “DIGITAL AUDIO OUT    (OPTICAL)” jack:    Decrease the volume    of the TV and adjust the    volume level with the    system’s volume control.
Digital Audio System
TV Rear Panel
Optical Cable (Not supplied)
 5.1CH audio is possible when the TV is connected to an antenna.  Each Digital Audio System has a different back panel configuration.    If you have an external device (DVD, Cable/Set top box) connected via HDMI to the TV, audio is not output from the Optical jack.  
When the COMPONENT IN or HDMI IN jacks are connected, the Optical jack on the TV outputs 2 channel audio only. If you want to hear 5.1 channel audio, connect the DIGITAL 
AUDIO OUT (OPTICAL) jack on the DVD player or Cable/Satellite Box directly to an 
Amplifier or Home Theater, not the TV.
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
Connecting a PC
PC TV Rear Panel
D-Sub Cable (Not supplied)
1
PC Audio Cable (Not supplied)2
1.	 	Connect a D-Sub Cable 
between PC IN [PC] 
connector on the TV and 
the PC output connector 
on your computer. 
2.		Connect a PC Audio 
Cable between the PC IN 
[AUDIO] jack on the TV 
and the Audio Out jack of 
the sound card on your 
computer.
Each PC has a different back panel configuration. When connecting a PC, match the color of the connection terminal to the cable. When using an HDMI/DVI cable connection, you must use the HDMI IN1 terminal.
. mm Stereo mini-plug/2RCA Cable (Not supplied)2
HDMI/DVI Cable (Not supplied)1
Using the D-Sub Cable
Using the HDMI/DVI Cable
TV Rear Panel
Using the D-Sub Cable
1.		Connect a HDMI/DVI cable 
between the HDMI IN 1 
jack on the TV and the 
PC output jack on your 
computer. 
2.		Connect a 3.5 mm Stereo 
mini-plug/2RCA Cable 
between the DVI IN(HDMI1) 
[R-AUDIO-L] jack on the 
TV and the Audio Out jack 
of the sound card on your 
computer.
Using the HDMI/DVI Cable
PC
BN68-01310B-00Eng.indd   112007-09-14   �� 4:11:06 
						

							English - 12
Plug & Play Feature
When the TV is initially powered on, basic settings proceed automatically and subsequently:
1.	Press the  POWER button on the remote control.     The message “Menu language, Shop Mode, Channels and Time will be set.” is     displayed.
   Press the ENTER button, the n “Select the language of the OSD” m enu     is automatically displayed.
2. Press the ▲ or ▼ button to select language, then press the ENTER button.     The message “Select Home Mode when installing this TV at home.” is displayed.
3.	Press the ◄ or ► button to select “Shop” or “Home”, then      press the ENTER button.      The message “Select the antennas to memorize.” is displayed.
   We recommend setting the TV to Home mode for the best picture in your          home environment.    Shop mode is only intended for use in retail environments.    If the unit is accidentally set to Shop mode and you want to return to Dynamic      (Home) mode, press any Volume button and then hold down the MENU button      for five seconds on the side panel of the TV.
4.	Press the ▲ or ▼ button to memorize the channels of the selected connection.    Press the ENTER button to select “Start”.     If the antenna is connected to ANT 1(AIR), select “Air” and if it is connected to        ANT 2 (CABLE), select “Cable”.
   If both ANT 1 (AIR) and ANT 2 (CABLE) are connected, select the “Air + Cable”.
   In Cable mode, you can select the correct signal source among STD, HRC,          and IRC by pressing the ▲ or ▼ button, then press the ENTER button.        Contact your local cable company to identify the type of cable system that          exists in your particular area.
5.	The TV will begin memorizing all of the available channels.    After all the available channels are stored, the Auto program menu reappears.    Press the ENTER button when channel memorization is complete.    The message “Select the clock mode.” is displayed.
   To stop the search before it has finished, press the ENTER button with stop         selected.
	
6.	Press the  ENTER button. 
   Press the ▲ or ▼ button to select “Auto”, then Press the ENTER button.    The message “Set to daylight savings time.” is displayed.
   If you select “Manual”, “Set current date and time.” is displayed. (See page 47)
Turning the TV On and Off
Press the POWER button on the remote control.
You can also use the  POWER button on the TV.
Operation
Select Home Mode when installing this TV at home.
Plug & Play
Plug & Play
Clock Set
Menu Language : 
Plug & Play
English
Español
Français
 Move  Enter Skip
Shop
Menu language, Shop Mode, 
 
Channels and Time will be set.
Start
Select the language of the OSD.
Home
 Move  Enter Skip
Select the antennas to memorize.
StartAir Plug & Play
Cable
Air+CableStartStart
 Move  Enter Skip
Clock Mode  :
 Move  Enter Skip
Select the clock mode.Plug & Play
Manual
Auto
%
Stop
    Enter Skip
Auto Program in progress.Air Channel 0
Plug & Play
Auto Program is complete.16 Channels were memorized.
Air : 16, Cable : 0.
   Enter  Skip
OK
Plug & Play
Plug & Play
BN68-01310B-00Eng.indd   122007-09-14   �� 4:11:08 
						

							English - 1
7.	Press the ▲ or ▼ button to select “On” or “Off”, then press the  ENTER button.    The message “Select the time zone in which you live.” is displayed.
8.	Press the ▲ or ▼ button to highlight the time zone for your local area     Press the ENTER button. If you have received a digital signal, the time will be set    automatically.    If not, see page 48 to set the clock.
9.	The message “Enjoy your watching.” is displayed.     When you have finished, press the ENTER button.
Changing Channels
1.	Press the  CH or
 CH button to change channels. 
   When you press the CH or
 CH button, the TV changes channels in 
      sequence.       You will see all the channels that the TV has memorized. (The TV must have        memorized at least three channels). You will not see channels that were either      erased or not memorized. See page 16 to memorize channels.
If you want to reset this feature...
1.	 Press the MENU button to display the menu.      Press the ▲ or ▼ button to select "Setup", then press the ENTER button.
2.
    Press the ENTER button again, to select "Plug & Play".
3.	 The message “Menu language, Shop Mode, Channels and Time will be set.”      is displayed.
Using the Channel buttons
Daylight Savings Time  :
Set to daylight savings time.Plug & Play
On
Off
Select the time zone in which you live. Plug & Play
Newfoundland
Atlantic
Eastern
Central
Mountain
Pacific
Alaska
Hawaii
Enjoy your watching.
OK
SetupPlug & Play       ►Language : English   ►Time      ►Game Mode  : Off   ► V-Chip      ► Caption      ►Menu TransParency  :  Medium   ►
▼More        
TV
 Move   Enter Return
Menu language, Shop Mode,  
Channels and Time will be set.
Start
 Move    Enter Skip
 Move   Enter Skip
1.		Press the number buttons to go directly to a channel. For example, to select 
channel 27, press  2, then 7. The TV will change channels when you press the 
second number.
Using the Number buttons
The “-” button is used to select stations that broadcast a digital signal.
1.	 	For example, for Channel 7-1, press  7, then -, then 1.
    HD indicates the TV is receiving a Digital High Definition signal. SD indicates 
the TV is receiving a Standard Definition signal.
    For quick channel change, press the number buttons, then press the  ENTER button.   
Using the “-” button
BN68-01310B-00Eng.indd   132007-09-14   �� 4:11:09 
						

							English - 14
Adjusting the Volume
Using the Volume buttons
1.	Press the VOL or VOL button to decrease or increase the volume. 
Using the MUTE button
At any time, you can cut off the sound using the MUTE button.
1.	 Press  MUTE  button and the sound cuts off.   
   The word "              " will appear in the lower-left corner of the screen.
2.	To turn mute off, press the  MUTE button again or simply press the      VOL or VOL button.
Viewing the Display
1.	 Press the  INFO button on the remote control.
   The TV will display the channel, the type of sound,     and the status of certain picture and sound settings.
 Press the  INFO button once more or wait approximately 10 seconds and  the  display disappears automatically.
The display identifies the current channel and the status of certain audio-video se ttings.  
Air 7
Mono
Picture Mode : Dynamic
Sound Mode : Custom
MTS : Stereo
0 : 4 pm
1.	Press the  PRE-CH button.    The TV will switch to the last channel viewed.
   To quickly switch between two channels that are far apart, tune to one        channel, then use the number button to select the second channel. Then        use the PRE-CH button to quickly alternate between them.
Using the PRE-CH button to select the Previous Channel
BN68-01310B-00Eng.indd   142007-09-14   �� 4:11:10 
						

							English - 1
Viewing the Menus
1.	With the power on, press the  MENU button.    The main menu appears on the screen. The menu’ s left side has five icons:    Picture, Sound, Channel, Setup, Input.
2.	Use the ▲ or ▼ button to select one of the five icons.      Then press the ENTER
 button to access the icon’s sub-menu.
3.	 Press the 
ExIT button to exit.
The on-screen menus disappear from the screen after about one minute. 
Memorizing the Channels
Your TV can memorize and store all of the available channels for both "off-air" (Air) and "Cable" channels. After the available 
channels are memorized, use the  CH or
 CH button to scan through the channels. This eliminates the need to change channels by entering the channels digits. There are three steps for memorizing channels: selecting a broadcast source, 
memorizing the channels (automatic) and adding or deleting channels (\
Channel Lists).
Selecting the Video Signal-source
Before your television can begin memorizing the available channels, you \
must specify the 
type of signal source that is connected to the TV (i.e. an Air or a Cable system).
1.	 Press the  MENU button to display the menu.   
   Press the ▲ or ▼ button to select "Channel", then press the ENTER
 button.
2.	 Press the  ENTER button select “Antenna”. 
   Press the ▲ or ▼ button to select “Air” or “Cable”, then press the ENTER button.
   Press the ExIT button to exit.
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►
Fine Tune     ►Signal Strength     ►LNA   : On ►
Channel
Move   Enter Return
TV
Channel
Move   Enter Return
TVAntenna  : Air  Auto Program     Clear Scrambled ChannelChannel List     Name    Fine Tune     Signal Strength     LNA  : On
Air
Cable
Move   Enter Exit
Mode  : Dynamic    ►Contrast     100brightness     4Sharpness     7Color     Tint  G 0       R 0backlight     10
▼More 
Picture
TV
BN68-01310B-00Eng.indd   152007-09-14   �� 4:11:11 
						

							English - 16
Storing Channels in Memory (Automatic Method)
1.	 Press the  MENU button to display the menu. 
   Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 
2.	 Press the ▲ or ▼ button to select "Auto Program", then press the  ENTER
 button.
3.	 Press the ▲ or ▼ button to select the antenna connection, then press the   
   ENTER button.
    Air: “Air” antenna signal.  
Cable: “Cable” antenna signal.   
Air+Cable: “Air” and “Cable” antenna signals.
4.	 When selecting the Cable TV system : Press the  ENTER button to start the auto  
   program. By default, the cable TV system is set to “STD”. If you want to select      another type of cable system, press the ▲ or ▼  button to select     “STD”, “HRC” or “IRC”.
   STD, HRC and IRC identify various types of cable TV systems. Contact your        local cable company to identify the type of cable system that exists in your       particular area. At this point the signal source has been selected.
   Press the ENTER button to start the auto program.      To stop the search before it has finished, press the ENTER button with “Stop”        selected.
5.	After all the available channels are stored, the “Auto Program” menu reappears.     Press the ExIT button to exit.
Move    Enter Return
Select the antennas to memorize.
Channel
Move   Enter Return
TV
StartAir
Cable
Air+CableStartStart
Move   Enter Return
Select the cable system.Auto Program
Move   Enter Return
TV
Analog
StartSTD
HRC IRC
DigitalSTD
HRC IRC
Antenna  : Air  ►Auto Program     ►Clear Scrambled Channel ►Channel List     ►Name    ►
Fine Tune     ►Signal Strength     ►LNA   : On ►
Channel
Move   Enter Return
TV
Auto ProgramPlug & Play
40%
Stop
    Enter Return
Auto Program in Progress.
Cable Channel 20 
Auto Program
Auto Program
 
  Enter Return
Auto Program is complete.
16 Channels were memorized.
Air : 16, Cable : 0.
OK
BN68-01310B-00Eng.indd   162007-09-14   �� 4:11:13 
						

							English - 17
After the television has been set up properly, your remote control can operate in five different modes: TV, DVD, Cable, Set-Top box, VCR. Pressing the corresponding  
button on the remote control allows you to switch between these modes and control   
whichever piece of equipment you choose.
The remote control might not be compatible with all DVD Players, VCRs, Cable boxes and Set-Top Boxes.
Setting Up the Remote to Operate Your VCR
1.
    Turn off your VCR.   
2. Press the VCR button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4.
    Using the number buttons on your remote control, enter three digits of the VCR code listed on page 19 of this manual for your brand of VCR. Make sure you enter three   
digits of the code, even if the first digit is a “0”.   
(If more than one code is listed, try the first one.)
.    Press the POWER button on the remote control. 
Your VCR should turn on if your remote is set up correctly.  
 
If your VCR does not turn on after set up, repeat steps 2, 3 and 4, but try one of the 
other codes listed for your brand of VCR.   
If no other codes are listed, try each VCR code, 000 through 080.
  Note on Using Remote Control Modes: VCR 
When your remote control is in “VCR” mode, the volume buttons still control your   
TV’s volume.
Setting Up the Remote to Operate Your Cable  box
1.   Turn off your cable box.
2. Press the CAbLE button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4.
    Using the number buttons on your remote control, enter three digits of the cable box code listed on page 20 of this manual for your brand of cable box. Make sure you enter 
three digits of the code, even if the first digit is a “0”. (If there is more than one code 
listed, try the first one.)
.   Press the POWER button on the remote control. 
Your cable box should turn on if your remote is set up correctly.  
 
If your cable box does not turn on after set up, repeat steps 2, 3 and 4, but try one of 
the other codes listed for your brand of cable box. If no other codes are listed, try each 
code, 000 through 046.
  Note on Using Remote Control Modes: Cable Box 
When your remote control is in “CABLE” mode, the volume buttons still control your   
TV’s volume.
Setting Up Your Remote Control
BN68-01310B-00Eng.indd   172007-09-14   �� 4:11:13 
						

							English - 18
Setting Up the Remote to Operate Your DVD
1.
   Turn off your DVD.
2. Press the DVD button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4.
    Using the number buttons on your remote control, enter three digits of the DVD code listed on page 20~21 of this manual for your brand of DVD.   
Make sure you enter three digits of the code, even if the first digit is a “0”.  
(If there is more than one code listed, try the first one.)
.    Press the POWER button on the remote control.  
Your DVD should turn on if your remote is set up correctly.  
 
If your DVD does not turn on after set up, repeat steps 2, 3 and 4, but try one of the 
other codes listed for your brand of DVD. 
If no other codes are listed, try each code, 000 through 141.
  Note on Using Remote Control Modes: DVD 
When your remote control is in “DVD” mode, the volume buttons still control your   
TV’s volume.
Setting Up the Remote to Operate Your STb 
1.
    Turn off your STB.
2. Press the STb  button on your TV’s remote control.
. Press the SET button on your TV’s remote control.
4.
    Using the number buttons on your remote control, enter three digits of the STB code listed on page 21 of this manual for your brand of STB.   
Make sure you enter three digits of the code, even if the first digit is a “0”.  
(If there is more than one code listed, try the first one.)
.    Press the POWER button on the remote control.  
Your STB should turn on if your remote is set up correctly. 
 
If your STB does not turn on after set-up, repeat steps 2, 3 and 4, but try one of the 
other codes listed for your brand of STB.   
(If no other codes are listed, try each code, 000 through 074.)
  Note on Using Remote Control Modes: STB 
When your remote control is in “STB” mode, the volume buttons still control your   
TV’s volume.
BN68-01310B-00Eng.indd   182007-09-14   �� 4:11:13