Ricoh Mp C4500 Instruction Manual

							Edit
101
3
❖Back Margin: Top/Bottom
Specify top and bottom margins on the back side of copies in Margin Adjust-
ment mode.
Top
Bottom
Default:
Metric version: T / B: 0mm
 Inch version: T / B: 0.0
❖1 Sided → 2 Sided Auto Margin: TtoT
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The margin is set to the same value of Back Margin: Left/Right.
Left
Right
Default:
Metric version: Right 5 mm
 Inch version: Right 0.2
❖1 Sided → 2 Sided Auto Margin: TtoB
In 1 sided to 2 sided Duplex mode, you can specify the margins on the back
side.
The value set for Back Margin: Top/Bottom is used.
Top
Bottom
Default:
Metric version: T / B: 0mm
 Inch version: T / B: 0.0
❖Erase Border Width
Top/Bottom 0mm
Default:
Metric version: 10mm
 Inch version: 0.4
❖Erase Original Shadow in Combine
In Combine mode, you can specify whether to erase a 3 mm, 0.1 boundary
margin around all four edges of each original.
On
Off 
						

							Copier / Document Server Features
102
3
❖Erase Centre Width
Specify the width of the erased centre margins with this function.
Default:
Metric version: 10 mm
 Inch version: 0.4
❖Front Cover Copy in Combine
You can make a combined copy on the front cover sheet when you select
Front Cover mode.
Combine
Do not Combine
❖Copy Order in Combine
You can set the copy order in Combine mode to Left to Right or Top to Bot-
tom.
From Left to Right
From Top to Bottom
❖Orientation: Booklet, Magazine
Select the opening orientation of copies made using Booklet or Magazine
mode.
Open to Left
Open to Right
❖Copy on Designating Page in Combine
Specify whether to make a combined copy on the inserted slip sheets in
Desig./Chapter mode.
Combine
Do not Combine
GCST019E
GCAH090E 
						

							Edit
103
3
❖Image Repeat Separation Line
You can select a separation line and colour using the Image Repeat function
from: None, Solid, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
Line colour (Full Colour):
Yellow
Red
Cyan
Magenta
Green
Blue
Black
Separation lines cannot be specified when using [None].
In Black and White, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately
1.5 mm (0.06) in width along the separation line. 
						

							Copier / Document Server Features
104
3
❖Double Copies Separation Line
You can select a separation line using the Double Copies function from: None,
Solid, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
Line colour (Full Colour):
Yellow
Red
Cyan
Magenta
Green
Blue
Black
Separation lines cannot be specified when using [None].
In Black and White, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately
1.5 mm (0.06) in width along the separation line. 
						

							Edit
105
3
❖Separation Line in Combine
You can select a separation line using the Combine function from: None, Sol-
id, Broken A, Broken B, or Crop Marks.
None
 Solid
Broken A
Broken B
 Crop Marks
Line colour (Full Colour):
Yellow
Red
Cyan
Magenta
Green
Blue
Black
Separation lines cannot be specified when using [None].
In Black and White, printing will be done in black.
Selecting solid or broken lines might produce a blank area of approximately
1.5 mm (0.06) in width along the separation line.
Reference
p.3 “Accessing User Tools”
Booklet/Magazine, Copy/ Document Server Reference 
						

							Copier / Document Server Features
106
3Stamp
This section describes the user tools in the Stamp menu under Copier / Docu-
ment Server Features.
Default settings are shown in bold type.
Background Numbering
This section describes the user tools in the Background Numbering menu under
Stamp.
❖Size
You can set the size of the numbers.
Small
Normal
Large
❖Density
You can set the density of the numbers.
Light
Normal
Dark
Very Dark
❖Stamp Colour
You can set the colour of the numbers.
Yellow
Red
Cyan
Magenta
Green
Blue
Black 
						

							Stamp
107
3
Preset Stamp
This section describes the user tools in the Preset Stamp menu under Stamp.
❖Stamp Language
You can select the language of the message printed in Stamp mode.
English
German
French
Italian
Spanish
Dutch
Portuguese
 Polish
Czech
Swedish
Finnish
Hungarian
 Norwegian
Danish
 Russian
Japanese
 Simplified Chinese
Traditional Chinese
Hangul
❖Stamp Priority
You can select the stamp type given priority when [Preset Stamp] is pressed.
COPY
URGENT
PRIORITY
For Your Info.
 PRELIMINARY
For Internal Use Only
CONFIDENTIAL
DRAFT 
						

							Copier / Document Server Features
108
3
❖Stamp Format
Specify how each of stamp is printed.
Stamp Position
Specify where to print the stamp.
Top Left
Top Centre
Top Right
 Centre Left
Centre
 Centre Right
Bottom Left
Bottom Centre
 Bottom Right
Stamp Position
You can adjust the position of the stamp within the available ranges shown
below.
Metric version:
Top Left…T/B: 4-144mm, L/R: 4-144mm
Top Centre…T/B: 4-144mm, L/R: 72-72mm
Top Right…T/B: 4-144mm, L/R: 4-144mm
Centre Left…T/B: 72-72mm, L/R: 4-144mm
Centre…T/B: 72-72mm, L/R: 72-72mm
Centre Right…T/B: 72-72mm, L/R: 4-144mm
Bottom Left…T/B: 4-144mm, L/R: 4-144mm
Bottom Centre…T/B: 4-144mm, L/R: 72-72mm
Bottom Right…T/B: 4-144mm, L/R: 4-144mm
 Inch version:
Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
Centre Left…T/B: 2.8-2.8, L/R: 0.1-5.7
Centre…T/B: 2.8-2.8, L/R: 2.8-2.8
Centre Right…T/B: 2.8-2.8, L/R: 0.1-5.7
Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
Bottom Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7
Size
You can set the size of the stamp.
1X
2X 
						

							Stamp
109
3
Density
You can set the pattern used to print the stamp.
Normal
The stamp is printed on the image. You cannot check which parts will
overlap.
Lighter
The image can be seen through the stamp.
Lightest
The image appears even clearer than in the Lighter setting.
 Page to Stamp
You can have the stamp printed on the first page or all pages.
All Pages
1st Page Only
❖Stamp Colour
Sets the stamp print colour.
Yellow
Red
Cyan
Magenta
Green
Blue
Black
Reference
Preset Stamp, Copy/ Document Server Reference 
						

							Copier / Document Server Features
110
3
User Stamp
This section describes the user tools in the User Stamp menu under Stamp.
❖Program/Delete Stamp
You can register, change, or delete user stamps.
You can register up to four custom stamps with your favorite designs.
❖Stamp Format:1-4
Specify how each of registered User Stamps 1 to 4 is printed.
Stamp Position
Specify where to print the User Stamp.
Top Left
Top Centre
Top Right
 Centre Left
Centre
 Centre Right
Bottom Left
Bottom Centre
 Bottom Right
Stamp Position
You can adjust the position of the User Stamp within the available ranges
shown below.
Metric version:
Top Left…T/B: 4-144mm, L/R: 4-144mm
Top Centre…T/B: 4-144mm, L/R: 72-72mm
Top Right…T/B: 4-144mm, L/R: 4-144mm
Centre Left…T/B: 72-72mm, L/R: 4-144mm
Centre…T/B: 72-72mm, L/R: 72-72mm
Centre Right…T/B: 72-72mm, L/R: 4-144mm
Bottom Left…T/B: 4-144mm, L/R: 4-144mm
Bottom Centre…T/B: 4-144mm, L/R: 72-72mm
Bottom Right…T/B: 4-144mm, L/R: 4-144mm
 Inch version:
Top Left…T/B: 0.1-5.7, L/R: 0.1-5.7
Top Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
Top Right…T/B: 0.1-5.7, L/R: 0.1-5.7
Centre Left…T/B: 2.8-2.8, L/R: 0.1-5.7
Centre…T/B: 2.8-2.8, L/R: 2.8-2.8
Centre Right…T/B: 2.8-2.8, L/R: 0.1-5.7
Bottom Left…T/B: 0.1-5.7, L/R: 0.1-5.7
Bottom Centre…T/B: 0.1-5.7, L/R: 2.8-2.8
Bottom Right…T/B: 0.1-5.7, L/R: 0.1-5.7