Philips Trim 1 Service Manual
Have a look at the manual Philips Trim 1 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 619 Philips manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Assembling the Cardiograph Cart and Patient Cable ArmAssembling the Patient Cable Arm PageWriter Trim Cardiograph Service ManualD-17 18Loosen the elbow hinge after fully assembling the patient cable arm. CAUTIONLoosen hinge carefully. Patient cable arm will open suddenly.
Assembling the Cardiograph Cart and Patient Cable ArmAssembling the Patient Cable Arm D-18PageWriter Trim Cardiograph Service Manual
E E-1 Appendix AUpgrade Kits The following upgrade kits are available for the PageWriter Trim II, III, and Rx model cardiographs: „Interpretation „Wireless LAN „Ethernet LAN For more information on ordering the upgrade kits, see “Upgrades and Accessories” on page 1-18. NOTEThere are no upgrades available for the PageWriter Trim I cardiograph. Upgrade Kit Contents Each upgrade kit includes the following items as described in Table E-1. Table E-1 Upgrade Kit Contents Interpretation Upgrade KitWireless LAN Upgrade KitEthernet LAN Upgrade Kit „Token information and label „User Documentation CD „Token information and label „User Documentation CD „Wireless LAN card „Token information and label „User Documentation CD „Ethernet LAN card „Ethernet LAN cable
Upgrade KitsUpgrade Kit Installation E-2PageWriter Trim Cardiograph Repair Manual Figure E-1 The Upgrade Kit Contents Upgrade Kit Installation Each upgrade kit is provided with a set of instructions that describe how to enter the token number information. Entering the token number activates the software option on the cardiograph. The following instructions must be completed before configuring the specific features of the upgrade option. For more information on token numbers and where to affix the token label to the cardiograph, see “PageWriter Trim II, III and Rx Token Label” on page 1-19. NOTEInstallation of an upgrade option requires software version A.01.03 or higher. If software version A.01.03 is not installed on the cardiograph, perform the software upgrade procedure first. See “Installing PageWriter Trim II, III, and Rx Software” on page B-1. To install the upgrade kit: 1 Return the cardiograph to active use. Press the On/Standby button if necessary. 2Press the Ta b key ( ) or turn the Trim Knob to highlight the Config button. 3Press the space bar or the Trim Knob to select the button. The Configuration screens appear. 4Press and hold the Alt key and then press the S key to select the System tab. 5Press the Ta b key or turn the Trim Knob to highlight the Enable Token button under Software Upgrade Option (bottom of screen). 6Press the space bar or the Trim Knob to select the button. The Please Input Token window appears. AUser Documentation CDBWireless LAN Card CEthernet LAN Card and CableDToken Information and Token label AB C D CONFIG
Upgrade KitsUpgrade Kit Installation PageWriter Trim Cardiograph Repair ManualE-3 Figure E-2 The Please Input Token window 7 Enter the token number in the Token field. 8Press the Ta b key or turn the Trim Knob to highlight the Enable Token button. 9Press the space bar or the Trim Knob to select the button. The option is enabled. 10Remove the paper drawer. Locate the existing token label inside the paper drawer compartment. Remove the existing label. Affix the new token label to the same location. For more information on token labels, see page 1-19. 11For information on configuring the wireless LAN option, see page C-1. For information on configuring the Ethernet LAN or interpretation option, see Chapter 2 “Configuration” of the PageWriter Trim Cardiograph Instructions for Use, this document may be downloaded from the Philips InCenter site. See “Using the Philips InCenter Site” on page 1-26. AEnter token number hereBCurrent installed options A B
Upgrade KitsUpgrade Kit Installation E-4PageWriter Trim Cardiograph Repair Manual
F F-1 Appendix ASpecifications Technical Specifications ECG Acquisition PageWriter Trim I „Auto (12 leads) „Rhythm (3 or 6 leads) PageWriter Trim II/III/Rx „Auto (12 leads) „Rhythm (up to 12 leads) „Disclose (1 lead) Keyboard PageWriter Trim II/III/Rx „Full alphanumeric capability Screen Display PageWriter Trim I „40 character LCD display PageWriter Trim II/III/Rx „640 x 480 pixel resolution „Color TFT display Patient Interface Module „Remote, microprocessor-controlled module
SpecificationsTechnical Specifications F-2PageWriter Trim Cardiograph Service Manual Cardiograph Cart „The cardiograph cart (optional accessory) has been tested for stability using the IEC 60601-1 test protocol. „The IEC 60601-1 protocol calls for the cardiograph cart to not tip over using a 10 degree angle of incline in any direction. It is possible to exceed this amount of incline when the cardiograph and cart are moved over a roadside curb or some other small but steep incline. Use care when moving the cardiograph cart. „Always remove the patient cable arm before transporting. Install the cart counterbalance prior to the installation of the Patient Cable Arm. Signal Processing/Acquisition Sampling Rate „2,000 samples per second per electrode/lead „24 bit A/D conversion provides 5µV resolution Auto Frequency Response 0.05-150 Hz, 0.15-150 Hz, 0.5-100 Hz 0.05-100 Hz, 0.15-100 Hz, 0.5-100 Hz 0.05-40 Hz, 0.15-40, 0.5-40 Hz Rhythm Frequency Response 0.05-150 Hz, 0.15-150 Hz, 0.05-150 Hz 0.15-100 Hz, 0.05-40 Hz, 0.15-40 Hz Filters „AC noise „Baseline Wander „Artifact „High and Low Pass Frequency Printer Printer Resolution „High-resolution, digital-array printer using thermal-sensitive paper „200 dpi at 25 mm/sec (voltage axis) by 500 dpi (time axis)
SpecificationsTechnical Specifications PageWriter Trim Cardiograph Service ManualF-3 Report Formats PageWriter Trim I „3x4, 1R „6x2 (Cabrera lead sequence only) „3 and 6 lead Rhythm report PageWriter Trim II/III/Rx „3x4 1R, 3R (Standard, Cabrera) „6x2 (Standard, Cabrera) „Panoramic 12 (Cabrera) „12x1(Standard, Cabrera) „Rhythm (up to 12 selected leads) „12-Lead Extended Measurements „Disclose (1 minute of continuous waveform data for 1 selected lead) Battery Operation Capacity „Typically 30 ECGs on a single charge or 30 minutes of continuous rhythm recording „No fail operation during ECG printing Recharge „Eight hours to full capacity Network Connection PageWriter Trim II/III/Rx „10 Base-T IEEE 802.3 Ethernet LAN FAX Capability (optional) PageWriter Trim II/III/Rx „Group 3, Class 1 or 2 fax modem protocol „Support for PCMCIA fax modem
SpecificationsTechnical Specifications F-4PageWriter Trim Cardiograph Service Manual Modem (optional for USA and Canada) PageWriter Trim II/III/Rx „V.90, K56flex, enhanced V.34, V.32bis, V.32, V.22 bis and below Barcode Reader (optional) PageWriter Trim II/III/Rx „Reads Code 39 (standard and full ASCII) Symbology Magnetic Card Reader (optional) PageWriter Trim II/III/Rx „Reads cards adhering to ISO 7810, 7811-1, -2, -3, -4, -5, and JIS X 6301 and X6302 ECG Storage „150 ECGs typical for the optional PCMCIA storage card PageWriter Trim II Internal ECG Storage „50 ECGs PageWriter Trim III Internal ECG Storage „150 ECGs PageWriter Trim Rx Internal ECG Storage „200 ECGs ECG File Formats PageWriter Trim II/III/Rx „XML and XML SVG Power and Environment „Class I, continuous operation Line Power „100-240 Vac, 50/60 Hz, 65 VA max