Panasonic Voice Processing System Kx Tva50 Subscribers Manual

Subscriber’s Manual
111
A2.3 Live Call Screening Password Canceling
To cancel the password, follow the procedure below. (It is not necessary to enter 
Personal Programming to activate this feature). PC programming is also available (see 
A2.6 Live Call Screening Assignment via PC Programming).
Note
 For KX-TDA and KX-TAW series PBXs, the term Live Call Screening Password used in 
this section indicates the Extension PIN (Personal Identification Number).
1.Lift the handset or press the SP-PHONE button....

Subscriber’s Manual
112
A2.5 Live Call Screening Private/Hands-Free Mode 
Assignment
This program assigns a VPS response for when a message is being left in a mailbox. 
It determines whether an alarm tone is sent and whether the recorded message is 
played through the built-in speaker of the extension. The default mode is hands-free. 
(This is station level programming and should be done at each individual telephone.) 
PC programming is also available (see A2.6 Live Call Screening Assignment via PC...

Subscriber’s Manual
113
A2.6 Live Call Screening Assignment via PC 
Programming
KX-TDA and KX-TAW series PBX users can program Live Call Screening features via 
PC programming. Follow the procedure below to assign each feature.
1.Go to Extension-Wired Extension-Extension Settings screen.
2.Select Option 4 window of the extension for which you want to program.
3.Assign LCS Recording Mode to Keep Record or Stop Record.
4.Assign LCS Answer Mode to Hands free or Private.
5.Click Apply to save the changed data. 

Subscriber’s Manual
114
A2.7 Live Call Screening Button Assignment
For the Live Call Screening feature to work at an extension, the extension must have 
an LCS button lit at the time of the message reception. This button must either be a 
DSS/BLF or CO button with a lamp. Follow the procedure below to assign an LCS 
button on an extension. (This is station level programming and should be done at each 
individual telephone.) PC programming is also available (see A2.12 Button 
Assignment via PC...

Subscriber’s Manual
115
A2.8 Two-way Recording (TWR) Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have 
a TWR button. This button must either be a DSS/BLF or CO button with a lamp. Follow 
the procedure below to assign a TWR button on an extension. (This is station level 
programming and should be done at each individual telephone.) PC programming is 
also available (see A2.12 Button Assignment via PC Programming).
1.Enter Personal Programming:
While...

Subscriber’s Manual
116
A2.9 Two-way Transfer (TWT) Button Assignment
For the Two-way Transfer feature to work at an extension, the extension must have a 
TWT button on it. This button must either be a DSS/BLF or CO button with a lamp. 
Follow the procedure below to assign a TWT button on an extension. (This is station 
level programming and should be done at each individual telephone.) PC programming 
is also available (see A2.12 Button Assignment via PC Programming).
1.Enter Personal Programming:
While...

Subscriber’s Manual
117
A2.10 One-touch Two-way Transfer (One-touch TWT) 
Button Assignment
For the One-touch Two-way Transfer feature to work at an extension, the extension 
must have a One-touch TWT button on it. This button must either be a DSS/BLF or CO 
button with a lamp. Follow the procedure below to assign a One-touch TWT button on 
an extension. (This is station level programming and should be done at each individual 
telephone.) PC programming is also available (see A2.12 Button Assignment via...

Subscriber’s Manual
118
A2.11 Voice Mail Transfer (VTR) Button Assignment
For the Voice Mail Transfer feature to work at an extension, the extension must have 
the VTR button. This button must either be a DSS/BLF or CO button with a lamp. 
Follow the procedure below to assign a VTR button on an extension. (This is station 
level programming and should be done at each individual telephone.) PC programming 
is also available (see A2.12 Button Assignment via PC Programming).
1.Enter Personal Programming:...

Subscriber’s Manual
119
A2.12 Button Assignment via PC Programming
KX-TDA and KX-TAW series PBX users can assign buttons for Live Call Screening 
(LCS), Two-way Recording (TWR), Two-way Transfer (TWT), and Voice Mail Transfer 
(VTR) via PC Programming. Follow the procedure below to assign each button.
1.Go to Extension-Wired Extension-Flexible Key screen.
2.Select Extension Number / Name for which you want to program.
3.Assign the desired Key Type to the Key Location you wish to program. When Two-
way...

Subscriber’s Manual
120
A2.13 Live Call Screening Activation
To activate Live Call Screening, follow the steps below. PC programming is also 
available (see A2.7 Live Call Screening Button Assignment and A2.12 Button 
Assignment via PC Programming).
1.Press the assigned LCS Button.
2.Enter the assigned LCS Password.
3.Confirm that the assigned LCS Button is red-on.
4.Repeat these steps for each telephone.
Conditions: To activate Live Call Screening, it is necessary to light the 
LCS button after...