Panasonic Voice Processing System Kx Tva50 Subscribers Manual

Subscriber’s Manual
131
A3.6 Live Call Screening Assignment via PC 
Programming
KX-TD500 and KX-TA824 users can program Live Call Screening features via PC 
programming. Follow the procedure below to assign each feature.
KX-TD500
1.Go to 4-2 Extension Line screen.
2.Select the Card No. and Port No. which you are going to program.
3.In LCS Settings:
a)To set LCS Password, Enter a 3-digit number (using 0-9) in LCS Password.
Note
 To cancel the password, erase the 3-digit number
b)To assign LCS Recording...

Subscriber’s Manual
132
Note
 To utilize the Live Call Screening features, it is necessary to first assign the LCS 
Password and LCS Button (see A3.12 Button Assignment via PC Programming), and 
then activate the LCS status.
4.Click Apply.
5.Repeat steps 2 to 4 for each extension.
KX-TA824
1.Go to 2.Extension - 2.Feature Settings.
2.Under LCS Password:
a)To set the LCS Password, enter a 3–digit number (using 0–9).
b)To cancel the LCS Password, delete the 3–digit number.
c)Click Apply to save the changed...

Subscriber’s Manual
133
6.Go to 2.Extension - 3.PT personal settings. 
7.Under LCS Mode, select Private or Hands-free.
8.Click Apply to save the changed data. 

Subscriber’s Manual
134 

Subscriber’s Manual
135
A3.7 Live Call Screening Button Assignment
For the Live Call Screening feature to work at an extension, the extension must have 
an LCS button lit at the time of the message reception. This key must either be a DSS/
BLF or CO key with a lamp. Follow the procedure below to assign an LCS button on 
an extension. (This item should be programmed by each extension user through 
Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12 
Button...

Subscriber’s Manual
136
A3.8 Live Call Screening Cancel Button Assignment
This button assignment allows you to assign a Flexible (CO, DSS) button as a Live Call 
Screening Cancel button.
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12 
Button Assignment via PC Programming).
1.Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to 
PROGRAM.
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display 
changes to PT-PGM...

Subscriber’s Manual
137
A3.9 Two-way Recording Button Assignment
For the Two-way Recording feature to work at an extension, the extension must have 
a TWR button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow 
the procedure below to assign a TWR button on an extension. (This item should be 
programmed by each extension user through Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12 
Button Assignment via PC Programming).
1.Enter PITS...

Subscriber’s Manual
138
A3.10 Two-way Transfer Button Assignment
For the Two-way Transfer feature to work at an extension, the extension must have a 
TWT button on it. This key must either be a DSS/BLF or CO key with a lamp. Follow 
the procedure below to assign a TWT button on an extension. (This item should be 
programmed by each extension user through Personal Programming.)
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12 
Button Assignment via PC Programming).
1.Enter PITS...

Subscriber’s Manual
139
A3.11 Voice Mail Transfer Button Assignment
This feature allows an extension user to transfer calls directly to a mailbox. This is 
available with both DPT and Inband Integration.
PC programming is also available for KX-TD500 and KX-TA824 users (see A3.12 
Button Assignment via PC Programming).
1.Enter PITS Programming:
a. While on-hook, press the PROGRAM button or set the MEMORY switch to 
PROGRAM.
b. Enter [99]. (This step is not needed for KX-TA624 and KX-TA824.) The display...

Subscriber’s Manual
140
A3.12 Button Assignment via PC Programming
KX-TD500 and KX-TA824 users can assign buttons via PC programming. Follow the 
procedure below to assign each button.
KX-TD500
1.Go to 4-2 Extension Line screen (refer to the screen image in A3.6 Live Call 
Screening Assignment via PC Programming).
2.Select the Card No. and Port No. which you are going to program.
3.Click CO Key in the upper right corner. Flexible CO Key screen (for all CO 
Keys) displays.
4.Click the Key Number to which...