Home > Panasonic > Digital Camcorder > Panasonic Pv Gs50 Operating Instructions Manual

Panasonic Pv Gs50 Operating Instructions Manual

    Download as PDF Print this page Share this page

    Have a look at the manual Panasonic Pv Gs50 Operating Instructions Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 10737 Panasonic manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							31
    1tWT
    5tWT
    10tW
    Z.MICT
    1
    1WT
    25tWT
    D.ZOOM
    12
    WT
    MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    Zoom In/Out Functions
    The Zoom Function can be used to record objects close by or to 
    achieve a wide-angle shot.
    1For wide-angle shots (zoom out): 
    Press the [W/T] zoom lever towards [W].
    For close-ups (zoom in): 
    Press the [W/T] zoom lever towards [T].
    ≥Zoom magnification is displayed for a few seconds.
    ≥Generally speaking, when the [W/T] zoom lever is pressed farther 
    towards [W] or [T], the zooming speed gradually increases.
    ªTaking Close-up Shots of Small Subjects 
    (Macro Close-up Function)
    When the zoom magnification is 1a, the Palmcorder can focus on a 
    subject that is as close as approximately 0.8 inches (20 mm) from 
    the lens. With this feature, small subjects such as insects can be 
    recorded.
    ªTo Use the Zoom Microphone Function
    Along with the zooming operation, the microphone’s directional 
    angle and sensitivity are varied for recording sounds.
    ≥Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> 
    [ZOOM MIC] >> [ON]. (The [Z.MIC] Indication is displayed.
     1)
    ≥The Zoom Microphone Function may not work effectively if the 
    surrounding noise is too loud.
    ≥When the [TAPE/CARD/CARD MODE] Selector is set to [CARD], 
    the Zoom Microphone Function does not work.
    ≥It does not work with an external microphone.
    ≥For other notes, see page 85.
    ~~~~~~~~~~~~~~~~~~~~~~
    Digital Zoom Function
    This function is useful when you want to record close-up shots of 
    subjects located beyond a normal zoom range of 1k to 10k 
    magnification. With the Digital Zoom Function, you can select a 
    magnification of 25k or 700k.
    1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
    [D.ZOOM] >> [25
    t] or [700t].
    ≥25k: Digital zooming to 25k
    ≥700k: Digital zooming to 700k
    2To zoom in or out, press the [W/T] zoom lever 
    towards [T] or towards [W].
    Canceling the Digital Zoom Function
    Set [D.ZOOM] on the [CAMERA SETUP] Sub-menu to [OFF].
    ≥As the magnification of digital zoom increases, the quality of image 
    may deteriorate.
    ≥White balance cannot be set in the digital zoom range.
    CAMERA
    PV-GS50P.book  31 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							32
    EIS1 1
    2
    MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    PHOTO
    SHOT
    1, 322FADE
    PHOTO
    SHOT
    1
    2
    Digital Electronic Image Stabilizer 
    Function
    If you are recording in unstable situations and the Palmcorder is 
    shaky, you can use this function to correct for camera shake in these 
    images.
    ≥If the Palmcorder shakes too much, this function may not be able to 
    stabilize images being recorded.
    1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
    [EIS] >> [ON].
    ≥The [EIS] Indication 1 appears.
    2Press the Recording Start/Stop Button or 
    [PHOTO SHOT] Button to start recording.
    Canceling Digital Electronic Image Stabilizer
    Set [EIS] on the [CAMERA SETUP] Sub-Menu to [OFF].
    ≥For other notes, see page 86.
    ~~~~~~~~~~~~~~~~~~~~~~
    Fade In/Out FunctionsFade In 1Fade In brings out images and sounds gradually from a black screen 
    at the beginning of a scene.
    1Hold down the [FADE] Button while the Palmcorder 
    is set to the Recording Pause Mode.
    ≥The image fades out gradually.
    2When the image is completely gone, press the 
    Recording Start/Stop Button to start recording.
    3Release the [FADE] Button about 3 seconds after 
    starting recording.
    ≥The image reappears gradually.
    Fade Out 2Fade Out causes images and sounds to disappear gradually, 
    leaving a black screen at the end of a scene.
    1Hold down the [FADE] Button while recording.
    ≥The image fades out gradually.2About 3 seconds after the image is completely gone, 
    press the recording Start/Stop Button to stop 
    recording.
    3Release the [FADE] Button.
    ≥Fading-in and fading-out cannot be used when recording still 
    pictures in the PhotoShot Mode, Digital Still Picture Mode, 
    Multi-Picture Mode, and for the small still picture in the 
    Picture-in-Picture Mode.
    PV-GS50P.book  32 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							33
    CINEMA
    1MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    1
    ª1
    BACK
    LIGHT1
    Cinema Function
    This function is for recording in a cinema-like wide screen.
    1Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
    [CINEMA] >> [ON].
    ≥Black bars appear at the top and bottom of the screen. 1
    To Cancel the Cinema Mode
    Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> [CINEMA] 
    >> [OFF].
    ≥For other notes, see page 86.
    ~~~~~~~~~~~~~~~~~~~~~~
    Backlight Compensation Function
    This function prevents a subject from being recorded too dark in 
    backlight. (Backlight is the light that shines from behind a recording 
    subject.)
    1Press the [BACK LIGHT] Button.
    ≥The [ª] Indication 1 flashes and then is displayed.
    To resume normal Recording
    Press the Backlight Button [BACK LIGHT].
    ≥When the [BACK LIGHT] Button is pressed, the entire screen 
    becomes brighter.
    ≥By operating the [OFF/ON/MODE] Switch, the Backlight 
    Compensation Function is cancelled.
    ≥This function cannot be used when the Iris is set.
    CAMERA
    PV-GS50P.book  33 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							34
    MagicPix Function
    This function allows you to record color images brightly in a dark 
    place without using a light.
    1Press the [MAGICPIX] Button until the [MAGICPIX] 
    Indication 
    1 appears.
    0 Lux MagicPix Function
    Using the LCD Monitor light, a dark scene of almost 0 lux can be 
    recorded.
    2Press the [MAGICPIX] Button until the 
    [0LUX MAGICPIX] Indication 
    2 appears.
    ≥The [REVERSE THE LCD MONITOR] Indication appears.
    3Rotate the LCD Monitor frontward (to the lens side).
    ≥The screen becomes white and the Viewfinder turns on.
    ≥The available range of the LCD Monitor light is within 
    approximately 3 feet (1 metre).
    To Cancel the MagicPix Function
    Press the [MAGICPIX] Button repeatedly until neither the 
    [MAGICPIX] Indication nor the [0LUX MAGICPIX] Indication 
    appears.
    ≥For other notes, see page 86.
    ~~~~~~~~~~~~~~~~~~~~~~
    Wind Noise Reduction Function
    This function reduces the noise that the wind makes as it hits the 
    microphone during recording.
    1Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] 
    >> [WIND CUT] >> [ON].
    ≥The [WIND CUT] Indication 1 appears.
    To Cancel the Wind Noise Reduction Function
    Set [CAMERA FUNCTIONS] >> [RECORDING SETUP] >> 
    [WIND CUT] >> [OFF].
    ≥It does not work with the microphone on the MagicWire Remote 
    Control with Narration Mic nor an external microphone.
    ≥When it is set to [ON], directivity of microphone is regulated 
    depending on the strength of wind to reduce wind noise.
    1
    MAGICPIX
    1, 2MAGIC
    PIX
    2
    0LUX
    MAGICPIX
    3
    1
    WIND  CUT
    1MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    PV-GS50P.book  34 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							35
    1
    3
    2
    4
    5
    2
    1MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    Recording in Special Situations (Program AE)
    Select optimal automatic exposures under specific recording 
    situations.
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication appears.
    2Set [CAMERA FUNCTIONS] >> [CAMERA SETUP] >> 
    [PROG.AE] >> a desired Mode [
    5], [7], [4], [Ω], 
    [
    º].
    ≥The Indication of the selected Mode is displayed.
    [5] Sports Mode 
    1For recording scenes involving quick movements, such as sports 
    scenes.
    [7] Portrait Mode 
    2Focuses on the main subject of the image and leaves the 
    background slightly out of focus.
    [4] Low Light Mode 
    3Preserves the mood of dim light settings without altering picture 
    brightness.
    [Ω] Spotlight Mode 
    4Neutralizes the additional brightness created by a spotlight.
    [º] Surf & Snow Mode 5
    Compensates for excessive illumination from sun glare to produce a 
    clear picture.
    Canceling the Program AE Function
    Set [PROG.AE] on the [CAMERA SETUP] Sub-Menu to [OFF]. Or, 
    set the Mode Selector Switch to [AUTO].
    ≥For other notes, see page 86.
    CAMERA
    PV-GS50P.book  35 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							36
    Manual Shutter Speed Adjustment
    Useful for recording fast-moving subjects.
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication 1 appears.
    2Press the [PUSH] Dial repeatedly until the shutter 
    speed Indication 
    2 appears.
    3Rotate the [PUSH] Dial to adjust the shutter speed.
    The Range of Shutter Speed Adjustment
    Tape Mode 1/60–1/8000
    Card Mode 1/60–1/500
    The standard shutter speed is 1/60 second.
    Selecting a speed closer to [1/8000] causes the shutter speed to be 
    faster, resulting in crisper captures of moving subjects but a lower 
    light level.
    ≥When the progressive function is [ON], a speed only up to 1/500 
    can be used.
    To Resume Automatic Adjustment
    Set the Mode Selector Switch to [AUTO].
    ≥For other notes, see page 87.
    ~~~~~~~~~~~~~~~~~~~~~~Manual Iris Adjustment (F Number)
    You can use this function when the screen is too bright or too dark.
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication 1 appears.
    2Press the [PUSH] Dial repeatedly until the Iris 
    Indication 
    2 appears.
    3Rotate the [PUSH] Dial to adjust the iris.
    Adjustable Range of the Iris
    CLOSE (Closed), F16, ..., F2.0,
    OPi (Opened) 0dB, ..., 18dB
    When a value closer to [CLOSE] is selected, the image becomes 
    darker.
    When a value closer to [OPi18dB] is selected, the image becomes 
    brighter.
    The value to which dB is attached indicates a gain value. If this value 
    is too large, the quality of the image deteriorates.
    To Resume Automatic Adjustment
    Set the Mode Selector Switch to [AUTO].
    ≥For other notes, see page 87.
    MNL
    1/1000
    1
    2
    12, 3
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    MNL
    1/60
           F2.0
    12, 3
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    1
    2
    PV-GS50P.book  36 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							37
    Manual Focus Adjustment
    Focus can be adjusted manually for recording in a situation where 
    auto focus may not function well.
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication 1 appears.
    2Set the Mode Selector Switch to [FOCUS].
    ≥The [1MF] Indication (Manual Focus Mode) 2 appears.
    3Rotate the [PUSH] Dial to adjust the focus.
    To Resume Automatic Adjustment
    Set the Mode Selector Switch to [AUTO].
    ~~~~~~~~~~~~~~~~~~~~~~
    Recording in Natural Colors (White Balance)
    Depending on the scene or light conditions, the Automatic White 
    Balance Adjustment Mode may not be able to bring out natural 
    colors. In such a case, the white balance can be adjusted manually.
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication appears.
    2Press the [PUSH] Dial.
    ≥The [AWB] Indication appears.
    3Rotate the [PUSH] Dial to set a desired White Balance 
    Mode.
    1 Automatic White Balance Adjustment [AWB]
    2 Indoor Mode (shooting under incandescent lighting) [{]3 Outdoor Mode [z]4 Fluorescent light Mode [|]
    5 The White Balance setting that was previously set manually [1]
    To Resume Automatic Adjustment
    Rotate the [PUSH] Dial until the [AWB] Indication appears. Or, set 
    the Mode Selector Switch to [AUTO].
    ≥When power is turned on with the Lens Cap on, the Automatic 
    White Balance Adjustment may not function properly. Please turn 
    on the Palmcorder after removing the Lens Cap.
    ≥For other notes, see page 87.
    MF MNL1
    2
    1, 23
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    1
    1
    4
    1
    3
    1
    1AW B
    2
    5
    1
    12, 3
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    CAMERA
    PV-GS50P.book  37 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							38
    Adjusting White Balance Manually
    When the Auto White Balance Adjustment function does not operate 
    suitably under the existing light conditions, use the Manual White 
    Balance Adjustment mode. 
    1Set the Mode Selector Switch to [MANUAL].
    ≥The [MNL] Indication 1 appears.2Press the [PUSH] Dial.≥The [AWB] Indication appears.3Rotate the [PUSH] Dial until the [1] Indication 2 is 
    displayed.
    4Point the Palmcorder at a full-screen white subject, 
    and then keep the [PUSH] Dial pressed until 
    indication [
    1] stops flashing.≥When the [1] Indication flashes after turning the Palmcorder 
    on, the previously adjusted white balance setting is still kept.
    To Resume Automatic Adjustment
    Rotate the [PUSH] Dial until the [AWB] Indication appears. Or, set 
    the Mode Selector Switch to [AUTO].
    ªAbout White Balance Sensor 
    The White Balance Sensor 3 determines the nature of the light 
    source during recording.
    ≥Do not cover the White Balance Sensor with your hand during 
    recording. Otherwise, White Balance will not work normally.
    ≥The red light from the Recording Lamp 
    4 will be reflected off your 
    hand or object, possibly causing the White Balance sensor to 
    operate incorrectly and changing the colouring.
    Use of Auto White Balance Adjustment in inappropriate lighting 
    conditions may result in reddish or bluish images. Where the subject 
    is surrounded by many light-sources, Auto White Balance 
    Adjustment may not operate properly. In such a case, we suggest 
    that you adjust the White Balance.
    1) The range that is controlled by the Auto White Balance 
    Adjustment Mode of this Palmcorder
    2) Blue sky
    3) Cloudy sky (Rain)
    4) TV screen
    5) Sunlight
    6) White fluorescent light
    7) Halogen light bulb
    8) Incandescent light bulb
    9) Sunrise and sunset
    10) Candlelight
    ≥For other notes, see page 87.
    MNL
    11
    2 1
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    AUTO
    MANUAL
    FOCUS
    2, 3, 4
    3
    4
    10 000K
    9 000K
    8 000K
    7 000K
    6 000K
    5 000K
    4 000K
    3 000K
    2 000K
    1 000K2)
    1)3)
    4)
    5)
    6)
    7)
    8)
    9)
    10)
    K=Kelvin Color Temperature
    PV-GS50P.book  38 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							39
    Digital Effect Functions
    This Palmcorder is equipped with digital effect functions that add 
    special effects to the scene.
    Digital Effects 1 [EFFECT1]
    1) [MULTI] Multi-Picture Mode 
    2) [P-IN-P] Picture-in-Picture Mode 
    3) [WIPE] Wipe Mode
    4) [MIX] Mix Mode
    5) [STROBE] Strobe Mode 
    ≥Records images with a stroboscopic effect.
    6) [GAIN UP] Gain up Mode 
    ≥Brightens images electronically.
    ≥Adjust focus manually when using this Mode. (l37)
    7) [TRAIL] Trailing Effect Mode 
    ≥Records images with a trailing effect.
    8) [MOSAIC] Mosaic Mode
    ≥Produces a mosaic-like image.
    9) [MIRROR] Mirror Mode 
    ≥The right half of an image becomes a mirror image of the left 
    half.
    Digital Effects 2 [EFFECT2]
    10) [NEGA] Negative Mode
    ≥The colors of the recorded image are inverted as seen in a 
    negative.
    11) [SEPIA] Sepia Mode
    ≥Records a scene with a brownish tint, like the color of old 
    pictures.
    12) [B/W] Black & White Mode
    ≥Records an image in black and white.
    13) [SOLARI] Solarization Mode
    ≥Records an image with a painting-like effect.
    Selecting a desired digital effect
    Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] 
    or [EFFECT2] >> a desired digital effect.
    Canceling the digital effect
    Set [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> [EFFECT1] 
    or [EFFECT2] >>[OFF].
    ≥If the Palmcorder is turned off, the [EFFECT2] settings are 
    cancelled.
    ≥For other notes, see page 87.
    3) WIPE 4) MIX 1) MULTI 2) P-IN-P
    5) STROBE
    6) GAIN UP7) TRAIL
    8) MOSAIC 9) MIRROR
    10) NEGA 11) SEPIA
    12) B/W 13) SOLARI
    CAMERA
    PV-GS50P.book  39 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    							40
    12
    34
    1, 24
    MENUPUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    PHOTO
    SHOT
    4
    MULTI
    P-IN-P3
    ªWipe Mode and Mix Mode
    Wipe Mode:
    Like a curtain being pulled, the still picture of the last recorded scene 
    gradually changes to the moving image of a new scene.
    Mix Mode:
    While the moving image of a new scene fades in, the still image of 
    the last recorded scene gradually fades out.
    1Set [DIGITAL EFFECT] >> [EFFECT1] >> [WIPE] or 
    [MIX].
    2Exit the menu by pressing the [MENU] Button.
    ≥The [WIPE] or [MIX] Indication appears.
    3Press the Recording Start/Stop Button to start the 
    Recording.
    4Press the Recording Start/Stop Button to pause the 
    Recording.
    ≥The last scene is stored in memory. The [WIPE] or [MIX] 
    Indication changes to [B] or [C].
    5Press the Recording Start/Stop Button to restart the 
    Recording.
    ≥The last image of the previous scene gradually changes to the 
    new scene.
    ≥For other notes, see page 87.
    ªPicture-in-Picture Mode
    You can display a sub-screen (still picture) inside the screen.
    After setting [CAMERA FUNCTIONS] >> [DIGITAL EFFECT] >> 
    [EFFECT1] >> [P-IN-P]......
    1Select [P-IN-P] on the [MULTI-PICTURES] Sub-Menu 
    and set the position (1234) where you want to 
    insert a small still picture.
    2Exit the menu by pressing the [MENU] Button.
    3Aim the Palmcorder at the scene you want to capture 
    and press the [P-IN-P] Button to insert a small still 
    picture.
    ≥A small still picture is displayed in a Normal picture.
    ≥If the [P-IN-P] Button is pressed again, the small still picture is 
    cleared.
    4Press the Recording Start/Stop Button or the 
    [PHOTO SHOT] Button to record on the Cassette.
    ≥For other notes, see page 87.
    WIPE
    MIX
    WIPE
    WIPE
    MIX
    MIX
    1, 2
    MENU
    PUSHMF / VOL / JOG W.B / SHUTTER / IRIS
    3, 4, 5
    PV-GS50P.book  40 ページ  2003年2月17日 月曜日 午後6時30分 
    						
    All Panasonic manuals Comments (0)

    Related Manuals for Panasonic Pv Gs50 Operating Instructions Manual