Panasonic Pv Gs50 Operating Instructions Manual

							91 ªCopying Pictures from a Memory 
Card to a Cassette 
(l59)
≥When recording the Card Image on a Tape, its 
size is transformed into 720k576 according to the 
DV format.
≥If you attempt to record a still picture with a large 
image size on a Tape, there may be a reduction in 
the quality of the image.
≥When recording the Card Images on a Tape, a 
PhotoShot index signal is automatically recorded 
with a picture.
≥Even if you edit the Slide Show, it is not applied to 
the order in copying the pictures.
≥Moving Picture (MPEG4) and Voice data cannot 
be recorded from a Card to tape.
ªSlide Show (l 60)
≥The playback time can be set from 7 to 99 
seconds for [ ] and [ ] sized pictures, and 
from 5 to 99 seconds for other sizes.
≥Perform the Slide Show Settings with your own 
Palmcorder.
≥Depending on the File size, playback may take 
longer than the set time.
≥When performing the preset Slide Show after the 
Titles are displayed, the Titles disappear.
ªTitle Functions (l 61, 62)
≥When the [TAPE/CARD/CARD MODE] Selector is 
set to [MPEG4] or [VOICE], Title Creation Function 
is not possible.
≥Even if the contrast of the Title is adjusted, the 
portions where there is little difference between 
light and dark and where the boundary between 
light and dark is unclear may not appear.
≥The Title may not appear clear if something small 
is used for it.
≥If you create an original title, the number of 
pictures that can be recorded on the Memory Card 
decreases.
≥If the number of pictures that can be recorded on 
the Memory Card is small, you may not be able to 
create an original title in some cases.
≥When a title is displayed in VCR Mode, the title is 
not output from the DV Terminal or Digital Still 
Picture Terminal.
≥When the [TAPE/CARD/CARD MODE] Selector is 
set to [MPEG4] or [VOICE], Title In Function is not 
possible.
≥The size of the created pictures is [640k480]. 
ªFormatting a Memory Card (l 65)
≥Even if files are locked, the files will be deleted 
when the Memory Card is formatted.
≥It may not be possible to use a Card which was 
formatted using this Palmcorder on another unit. In 
this case, format the Card on the unit which will be 
using the Card. Take steps to ensure that valuable 
files are stored on a personal computer, etc. as 
well, before proceeding.
≥A Card formatted with other equipment (like a 
Personal Computer) might be unusable or might 
take more time for recording. We recommend that 
you use this Palmcorder to format it.
ªUsing your Palmcorder with Digital 
Video Equipment (Dubbing) 
(l 67)
≥Regardless of the setting, dubbing is carried out 
automatically in the same audio recording Mode 
as that of the Cassette in the playback-side 
equipment.
≥The images on the monitor of the recording side 
may be disturbed, but it does not affect the 
recorded images.
≥Even if Playback Digital Effects, Playback Zoom, or 
Playback Title In have been used, these effects are 
not output from the DV Terminal.
≥Even if you use a device with DV Terminals, you 
may not be able to perform digital dubbing in some 
cases.
≥Date or other information to be displayed cannot 
be displayed if the software of the connected 
equipment does not support the display function.
ªUsing a Card in a Personal 
Computer
≥To erase pictures that you recorded on the Card by 
using the Palmcorder, be sure to erase them on 
the Palmcorder, not on the computer.
≥You may not be able to properly play back or 
search the images on the Palmcorder after editing 
the recorded data or changing the image data on a 
personal computer.
QXGAUXGA
Others
PV-GS50P.book  91 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							92
Cautions for Use
ªAfter Use
1
Take out the Cassette. (l 20)
2Set the [OFF/ON/MODE] Switch to 
[OFF]. 
(l 20)
3Detach the Power Source and retract 
the Viewfinder. 
(l 18)
4To protect the Lens, attach the supplied 
Lens Cap. 
(l 19)
ªTips for using your Palmcorder
When you use your Palmcorder on a rainy or 
snowy day or on a beach, make sure that no 
water enters the Palmcorder.
≥Water may cause the Palmcorder or Cassette to 
malfunction. (Irreparable damage may occur.)
≥If sea water splashes onto the Palmcorder, wet a 
soft cloth with tap water, wring it well, and use it to 
wipe the Palmcorder body carefully. Then, wipe it 
again thoroughly with a soft dry cloth.
Keep the Palmcorder away from magnetically 
charged equipment (such as a TV, game 
equipment, etc.)
≥If you use the Palmcorder near a TV, images or 
sounds may be disturbed due to electromagnetic 
wave radiation.
≥Do not use near a cell phone because doing so 
may cause noise to adversely affect the picture 
and sound.
≥Due to strong magnetic fields created by speakers 
or large motors, recording on the tape may be 
damaged, or images may be distorted.
≥Electromagnetic wave radiation generated by a 
microprocessor may adversely affect the 
Palmcorder, causing the disturbance of images 
and sounds.
≥If the Palmcorder is affected by magnetically 
charged equipment and does not function 
properly, turn off the Palmcorder power and 
detach the Battery or AC Adaptor and then 
connect the Battery or AC Adaptor again. 
Thereafter, turn on the Palmcorder power.
Do not use your Palmcorder near radio 
transmitters or high-voltage lines.
≥If you record pictures near radio transmitters or 
high-voltage lines, recorded images or sounds 
may be adversely affected.
Do not use this Palmcorder for surveillance 
purposes or other business use.
≥If you use the Palmcorder for a long period of time, 
the internal temperature increases and, 
consequently, this may cause malfunction.
≥This Palmcorder is not intended for industrial use.When you use your Palmcorder on a beach or 
similar place, do not let sand or fine dust get 
into the Palmcorder.
≥Sand or dust may damage the Palmcorder or 
Cassette. (Care should be taken when inserting 
and removing the Cassette.)
Do not spray insecticides or volatile chemicals 
onto the Palmcorder.
≥If the Palmcorder is sprayed with such chemicals, 
the Palmcorder body may deform and the surface 
finish may peel off.
≥Do not keep a rubber or plastic product in contact 
with the Palmcorder for a long period of time.
When cleaning the Palmcorder, do not use any 
solvent, such as benzine, alcohol, thinner, etc.
≥The Palmcorder body may become damaged and 
the surface finish may peel off.
≥Before cleaning, detach the Battery or pull out the 
AC Cable from the AC Jack.
≥Wipe the Palmcorder with a soft dry cloth. To 
remove stubborn stains, wipe with a cloth that is 
soaked in a detergent diluted with water and 
afterward finish wiping with a dry cloth.
≥For storing or transporting the Palmcorder, place it 
in a bag or case lined with soft pads so as to 
prevent the coating on the Palmcorder body from 
becoming worn.
After use, be sure to take the Cassette out and 
detach the Battery from the Palmcorder or pull 
out the AC Cable from the AC Jack.
≥If the Cassette is left in the Palmcorder, the tape 
sags and deteriorates.
≥If you leave the Battery in the Palmcorder or on the 
AC Adaptor, the Battery will no longer be 
rechargeable.
ªAbout the AC Adaptor
≥If the temperature of the Battery is extremely high 
or extremely low, the [CHARGE] Lamp may 
continue flashing, and the Battery may not charge. 
After the temperature of the Battery has decreased 
or increased sufficiently, charging starts 
automatically. If the [CHARGE] Lamp continues to 
flash even after the Battery temperature has 
decreased or increased sufficiently, the Battery or 
AC Adaptor may be faulty. In this case, please 
contact your dealer.
≥If the Battery is warm, charging takes longer than 
usual.
≥If you use the AC Adaptor near a radio, radio 
reception may be disturbed. Keep the AC Adaptor 
3 feet (1 meter) or more away from radios.
≥When the AC Adaptor is in use, it may generate 
whirring sounds. This is normal.
PV-GS50P.book  92 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							93
≥After use, be sure to pull out the AC Cable from 
the AC Jack. (If they are left connected, a small 
amount of electricity is consumed.)
≥Always keep the electrodes of the AC Adaptor and 
Battery clean.
ªCondensation
If excessive moisture condenses in the unit, 
[DEW DETECTED] Indication will flash, and the 
Palmcorder will automatically turn off after about 
1 minute.
If this happens, follow the steps below:
1Take out the Cassette.
≥None of the other functions operate. 
Depending on the amount of condensation, 
removing the Cassette may become difficult. If 
this happens, wait for 2 to 3 hours before 
taking the Cassette out.
2Open the Cassette Compartment and 
wait for 2 to 3 hours.
≥The number of hours you should wait depends 
on the amount of condensation and ambient 
temperature.
32 to 3 hours later, turn on the 
Palmcorder and check to see if the 
[DEW DETECTED] Indication is displayed.
≥Even if the [DEW DETECTED] Indication is 
not displayed, as a precaution, please wait for 
another hour before using the Palmcorder.
Watch for Condensation Even Before the 
[DEW DETECTED] Indication Is Displayed.
≥Because condensation takes place gradually, the 
[DEW DETECTED] Indication may not be 
displayed during the first 10 to 15 minutes of 
condensation formation inside the Palmcorder.
≥In extremely cold places, condensation may freeze 
and form frost. In this case, the frost melts first, 
thus forming condensation, and then it takes 
another 2 to 3 hours to eliminate the condensation.
When the Lens Is Fogged:
Set the [OFF/ON/MODE] Switch to [OFF] and leave 
the Palmcorder in this condition for about 1 hour. 
When the lens temperature becomes close to the 
ambient temperature, the fog disappears naturally.
ªDigital Video Head Cleaner
If the heads (the parts that make contact with tape) 
are dirty, mosaic-like noise patterns may appear on 
the playback image, or the screen as a whole 
becomes black. If the heads are extremely dirty, 
recording performance deteriorates, and, in the 
worst case, the Palmcorder cannot record at all.Causes of Digital Video Heads Becoming Dirty
≥Large quantity of dust in the air
≥High-temperature and high-humidity environment
≥Damaged tape
≥Long operating hours
Using Mini-DV Format Digital Video Head 
Cleaner (AY-DVMCLA)
1Insert the Head Cleaner into the 
Palmcorder in the same manner as a 
Video Cassette.
2Press the [1] Button, and 20 seconds 
later, Press the [
∫] Button. (Do not 
rewind the tape.)
3Take out the head cleaner. Insert a 
Video Cassette and start recording. 
Then, play the tape back to check the 
recorded image.
4If the image is still not clear, repeat 
Steps 1 to 3. (Do not use the Head 
Cleaner 3 times or more consecutively.)
Notes:
≥Do not rewind every time you use the Head 
Cleaner. Rewind only when the tape reaches the 
end, and then use it again from the beginning in 
the same manner as before.
≥If the heads become dirty soon after cleaning, the 
Mini DV may be damaged. In this case, 
immediately stop using that Cassette.
≥Do not clean the heads excessively. (Excessive 
cleaning may cause excessive wear of the heads. 
If the heads are worn, images cannot be played 
back even after the heads are cleaned.)
≥If the dirty heads cannot be cleaned with the head 
cleaner, the Palmcorder needs to be cleaned at a 
service center. Please consult a distributor or 
Panasonic Servicenter.
≥Video head cleaners can be purchased from 
service centers.
≥Head cleaning due to dirty heads is not considered 
a malfunction of the product. It is not covered by 
the warranty.
Periodic Check-up
To maintain the highest image quality, we 
recommend replacement of worn parts, such as 
heads, etc., after approximately 1000 hours of use. 
(This, however, depends on operating conditions, 
such as temperature, humidity, dust, etc.)
Others
PV-GS50P.book  93 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							94 ªOptimal Use of the Battery
Battery Characteristics
This Battery is a rechargeable lithium ion battery. Its 
ability to generate power is based upon the 
chemical reaction that takes place inside it. This 
reaction is affected by the surrounding temperature 
and humidity, and, if the temperature is too high or 
too low, the operating time of the Battery becomes 
shorter. If the Battery is used in an extremely cold 
environment, the Battery may operate only for about 
5 minutes. If the Battery becomes extremely hot, a 
protective function may operate, and the Battery 
may even become unusable for awhile.
Be Sure to Detach the Battery After Use
Be sure to detach the Battery from the Palmcorder. 
(If it is left attached to the Palmcorder, a minute 
amount of current is consumed even when the 
Palmcorder power is off.) If the Battery is left 
attached to the Palmcorder for a long time, over 
discharge takes place. The Battery may become 
unusable after it is charged.
Disposing of an unusable Battery
≥The Battery has a limited life.
≥Do not throw the Battery into fire because it may 
cause an explosion.
Always Keep the Terminals of the Battery Clean
Prevent the terminals from getting clogged with dirt, 
dust, or other substances.
If you drop the Battery accidentally, check to see if 
the Battery body and terminals are damaged.
Attaching a damaged Battery to the Palmcorder or 
AC Adaptor may damage the Palmcorder or AC 
Adaptor.
ªCautions for Storage
Before storing the Palmcorder, take the Cassette 
out and detach the Battery.
Store all the components in a dry place with a 
relatively stable temperature.
≥Recommended Temperature: 59 oF to 77 oF (15oC 
to 25 oC), Recommended Humidity: 40% to 60%
Palmcorder
≥Wrap it with a soft cloth to prevent dust from 
getting into the Palmcorder.
≥Do not leave the Palmcorder in places that expose 
it to high temperature.
Battery
≥Extremely high temperatures or low temperatures 
will shorten the life of the Battery.
≥If the Battery is kept in smoky or dusty places, the 
terminals may rust and cause malfunctions.
≥Do not allow the Battery terminals to come in 
contact with metal objects (such as necklaces, 
hairpins, etc.) This can result in a short circuit or 
heat generation and, if you touch the Battery in this 
condition, you may be badly burned.≥Store the Battery in a completely discharged state. 
To store the Battery for a long period of time, we 
recommend you charge it once every year and 
store it again after you completely use up the 
charged capacity.
Cassette
≥Before storing it, rewind the tape to the beginning. 
If the Cassette is left for more than 6 months with 
the tape stopped midway, the tape sags (although 
it depends on the storage conditions.) Be sure to 
rewind to the beginning.
≥Store the Cassette in its case. Dust, direct sunlight 
(ultraviolet rays), or humidity may damage the 
tape. Dust contains hard mineral particles, and 
dusty Cassettes damage the heads of the 
Palmcorder and other components. Develop a 
habit of returning the Cassette back to its case.
≥Twice a year, wind the tape to the end and then 
rewind it to the beginning. If the Cassette is left for 
1 year or longer without winding or rewinding, 
temperature and humidity changes may cause the 
Cassette to deform due to swelling, shrinking, and 
so forth. The wound tape may stick to itself.
≥Do not place a Cassette near highly magnetic 
substances or equipment.
≥The surface of tape is covered with extremely 
minute magnetic particles, upon which signals are 
recorded. Magnetic necklaces, toys, etc., have 
magnetic force that is stronger than you may 
normally expect, and they may erase the contents 
of a recording or may cause noise in images and 
sounds.
Card
≥When the Card is being read, do not remove the 
Card, turn off the power, or subject it to vibration or 
impact.
≥Do not leave the Card in places where there is 
high temperature or direct sunlight, or where 
electromagnetic waves or static electricity are 
easily generated.
≥Do not bend or drop the Card. The Card or the 
recorded content may be damaged.
≥After use, be sure to remove the Card from the 
Palmcorder.
≥After use, store the supplied SD Memory Card in 
the enclosed bag.
≥Do not touch the terminals on the back of the Card 
with your fingers. Do not allow dirt, dust or water to 
enter it.
≥Keep the Memory Card out of reach of children to 
prevent swallowing.
PV-GS50P.book  94 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							95 ªLCD Monitor/Viewfinder/Lens Hood
LCD Monitor
≥In a place with drastic temperature changes, 
condensation may take place on the LCD Monitor. 
Wipe it with soft dry cloth.
≥If your Palmcorder is extremely cold when you turn 
its power on, the image on the LCD Monitor will be 
slightly darker than usual at first. However, as the 
internal temperature increases, it goes back to the 
normal brightness.
..................................................................................
Extremely high precision technology is employed to 
produce the LCD Monitor screen featuring a total of 
approximately 113,000 pixels. The result is more 
than 99.99% effective pixels with a mere 0.01% of 
the pixels inactive or always lit. However, this is not 
a malfunction and does not affect the recorded 
picture.
..................................................................................
Viewfinder
≥Do not direct the Viewfinder or Lens to the sun. 
Internal components may be seriously damaged.
≥When the Palmcorder is used with a large capacity 
Battery attached to it, it is not practical to look in 
the Viewfinder from behind the Battery. In this 
case, lift up the Viewfinder to an easy-to-see 
angle.
..................................................................................
Extremely high precision technology is employed to 
produce the Viewfinder screen featuring a total of 
approximately 113,000 pixels. The result is more 
than 99.99% active pixels with a mere 0.01% of the 
pixels inactive or always lit. However, this is not a 
malfunction and does not affect the recorded 
picture.
..................................................................................
Lens Hood
≥Do not attach other conversion lenses in front of 
the Lens Hood; there is no mount to be used for 
the attachment.
≥If you want to attach the Tele Conversion Lens 
(not supplied) or the Wide Conversion Lens (not 
supplied), MC Protector (not supplied) or ND Filter 
(not supplied) first of all, turn the Lens Hood 
counter-clockwise. If the MC Protector (not 
supplied) or ND Filter (not supplied) is used, the 
Lens Hood can be mounted on the filter.
≥If you push the [W/T] Lever toward [W] during 
recording with the filter or conversion lens 
attached to the Palmcorder, the 4 corners of the 
image may become dark (vignetting). For details, 
please refer to the operating instructions for your 
accessories.
≥Be sure to keep the Lens Hood attached to the 
Palmcorder so as to shut out unnecessary light.Explanation of Terms
ªDigital Video System
In a digital video system, images and sounds are 
converted into digital signals and recorded on a 
tape. This complete digital recording is capable of 
recording and playback with minimal image and 
sound deterioration.
In addition, it automatically records data, such as 
Time Code and date/time, as digital signals.
Compatibility with S-VHS or VHS Cassettes
Because this Palmcorder employs a digital system 
for recording image and sound data, the cassette is 
not compatible with conventional S-VHS or VHS 
video equipment that employs an analog recording 
system.
The size and shape of the Cassettes are also 
different.
Compatibility with Output Signals
Because AV signal output from the AV signal output 
jack is analog (the same as conventional video 
systems), this Palmcorder can be connected with 
S-VHS or VHS VCR or a TV for playback. 
(l49, 66)
ªFocus
Auto Focus Adjustment
The Auto Focus System automatically moves the 
internal focusing lens forward or backward and 
adjusts the focus so that the subject can be seen 
clearly.
However, the Auto Focus System does not function 
properly for the following subjects or under the 
following recording conditions.
Please use the Manual Focus Mode instead.
1) Recording a subject whose one end is 
located closer to the Palmcorder and the 
other end farther away from it
≥Because Auto Focus makes adjustments at 
the center of an image, it may be impossible to 
focus on a subject that is located in both 
foreground and background.
2) Recording a subject behind dirty or dusty 
glass
≥Because the focus is on the dirty glass, the 
subject behind the glass will not be in focus.
3) Recording a subject in dark surroundings
≥Because the light information that comes 
through the lens decreases considerably, the 
Palmcorder may not focus correctly.
Others
PV-GS50P.book  95 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							96
4) Recording a subject that is surrounded by 
objects with glossy surfaces or by highly 
reflective objects
≥Because the Palmcorder focuses on the 
objects with glossy surfaces or on highly 
reflective objects, the recording subject may 
become blurry.
5) Recording a fast-moving subject
≥Because the focus lens inside moves 
mechanically, it may not be able to keep up 
with the fast-moving subject.
6) Recording a subject with little contrast
≥Because the Palmcorder achieves focus 
based upon the vertical lines of an image, a 
subject with little contrast, such as a white 
wall, may become blurry.
ªWhite Balance Adjustment
Depending on the type of light source, the colors 
recorded by the Palmcorder may be affected. In 
some cases, images may be recorded with a bluish 
or reddish hue. To minimize the effect of light on the 
subject’s color, White Balance Adjustment becomes 
necessary.
White Balance Adjustment
White Balance Adjustment recognizes the color of 
light and makes adjustment so that the white color 
will become pure white.
Auto White Balance Adjustment
This Palmcorder stores settings that are optimal for 
several kinds of general light sources. The 
Palmcorder determines the hue of light that it 
receives through the lens and White Balance 
Sensor, thereby judging the recording condition, and 
selects the closest hue setting. This function is 
called Auto White Balance Adjustment.
However, since white balance settings for only 
certain kinds of light sources are stored, the Auto 
White Balance function does not operate properly 
when recording occurs under light that is out of the 
range of the setting values.
ªTime Code
Time Code signals are data that indicate time 
measured in hours, minutes, seconds, and frames 
(30 frames per second.) If this data is included in a 
recording, an address is assigned to each image on 
the tape.
≥The Time Code is automatically recorded as a part 
of the sub-code at each recording.≥When a new (previously unrecorded) Cassette is 
inserted, the Time Code automatically starts from 
zero. If a recorded Cassette is inserted, the Time 
Code picks up from the point where the last scene 
was recorded. (In this case, when the Cassette is 
inserted, the zero display [0h00m00s00f] may 
appear, but the Time Code starts from the 
previous value.)
≥The Time Code cannot be reset to zero.
≥Unless the Time Code is continuously recorded 
from the beginning of a tape, accurate editing may 
not be possible. To ensure that the Time Code will 
be recorded with no breaks, we recommend the 
use of the Camera Search Function (l 28) or the 
Blank Search Function (l 45) before recording a 
new scene.
ªMemory Stop Function
The Memory Stop Function is useful for the 
following operations.
Rewinding or fast-forwarding a tape to a desired 
position
1Set [DISPLAY SETUP] >> [C.DISPLAY] 
>> [MEMORY].
2Reset the Tape Counter to zero at the 
tape position from which you want to 
play it back later. 
(l 15, 24)
3Start playback or recording.
4When playback or recording is over: 
rotate the [OFF/ON/MODE] Switch and 
set the Palmcorder in the VCR Mode.
≥The [VCR] Lamp lights up.
5Rewind the tape.
≥The tape automatically stops approximately at 
the position where the counter was set to zero.
Stopping editing automatically during audio 
dubbing
1Set [DISPLAY SETUP] >> [C.DISPLAY] 
>> [MEMORY].
2Reset the Tape Counter to zero at the 
position where you want to stop 
editing.
3Play back the still pictures where you 
want to start audio dubbing.
4Start audio dubbing. (l 50)
≥Audio dubbing automatically stops at the 
position where the counter was set to zero.
PV-GS50P.book  96 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							97
Specifications
Digital PalmcorderInformation for your safety
Power Source:  DC 7.9/7.2 V
Power Consumption:  Recording
5.0 W
Recording Format:  Mini DV (Consumer-use 
Digital Video SD Format)
Tape Used:  6.35 mm digital video tape
Recording/Playback Time: SP: 80 min.;
LP: 120 min. (with DVM80)
Video Recording System:  Digital Component
Television System:  EIA Standard: 525 lines 
60 Fields NTSC color signal
Audio Recording System:  PCM Digital Recording
16 bit (48 kHz/2 track),
12 bit (32 kHz/4 track)
Image Sensor:  1/6-inch CCD Image Sensor
Lens:  Auto Iris, F1.8,
Focal Length; 2.3-23 mm,
Macro (Full Range AF)
Filter Diameter:  27 mm
Zoom: 10:1 Power Zoom
Monitor: 2.5-inch LCD
Finder:  Color Electronic Viewfinder
Microphone: Stereo
Speaker:  1 round speaker 20 mm
Standard Illumination:  1,400 lx
Minimum Required
Illumination: 12 lx
Video Output Level:  1.0 Vp-p, 75 ohm
S-Video Output Level:  Y Output: 1.0 Vp-p, 75 ohm
C Output: 0.286 Vp-p, 75 ohm
Audio Output Level:  316 mV, 600 ohm
Video Input Level:  1.0 Vp-p, 75 ohm
S-Video Input Level:  Y Input: 1.0 Vp-p, 75 ohm
C Input: 0.286 Vp-p, 75 ohm
Audio Input Level (Line):  316 mV, 10 kohm or more
Mic Input:  Mic sensitivity -50 dB 
(0 dB = 1 V/Pa, 1 kHz)
(Stereo mini jack)
USB: Card reader/writer function,
(No copyright protection 
support)
USB 2.0 compliant 
(max. 12 Mbps)
Digital Interface:  DV Input/Output Terminal 
(IEEE1394, 4-pin)
Dimensions: 2.60 (W)k3.27 (H)k4.33 (D) 
inch
66 (W)k83 (H)k110 (D) mm
Weight: 0.97 lbs. (440 g) 
(without Battery and DV 
cassette)
Operating Temperature:  32 oF -104 oF (0 oC
-40 oC)
Operating Humidity:  10% -80%Card Memory Functions
Recording Media: SD Memory Card, 
MultiMediaCard
Image Compression: JPEG
Video Compression: MPEG4
Sound Compression: G.726
Maximum Number of pictures that can be recorded on 
the supplied SD Memory Card
FINE: approx. 45 pictures
NORMAL: approx. 95 pictures
ECONOMY: approx. 190 pictures
≥When you record in one Memory Card using various 
modes (FINE, NORMAL, ECONOMY), the maximum 
number of images available will not exceed the indications 
stated above.
≥The indicated Maximum Number of pictures that can be 
recorded is an approximate calculation. The number of 
recordable still pictures on the SD Memory Card may 
differ depending on the subject.
AC Adaptor Information for your safety
Power Source:  AC 110-240 V, 50/60 Hz
Power Consumption:  19 W
0.5 W (When not in use.)
DC Output:  DC 7.9 V, 1.4 A 
(Palmcorder Operation)
DC 8.4 V, 0.65 A 
(Battery Charging)
Dimensions: 2.40 (W)k1.26 (H)k3.58 (D) 
inch
61 (W)
k32 (H)k91 (D) mmWeight: 0.231lbs. (105 g)
Weight and dimensions shown are approximate.
Designs and specifications are subject to change without 
prior notice.
Others
PV-GS50P.book  97 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							98
Palmcorder Accessory System
*Please refer to page 18, concerning the battery charging time and available recording time.
*NOTE: Accessories and/or model numbers may vary by country. Please consult your local dealer.
Accessory# 
PV-DAC13
*CGA-DU14 
*CGA-DU21
PV-DDC9
 (For USA)
PV-DDC9-K (For Canada)
Description
AC Adaptor with AC Cable 
and DC Cable      
1360mAh/Rechargeable 
Lithium Ion Battery Pack
2040mAh/Rechargeable 
Lithium Ion Battery Pack
DV Interface Cable (i.LINK) 
(4-pin to 4-pin)     
IR Remote Control  
Figure
PV-DRC9 (For USA)
PV-DRC9-K (For Canada)
RP-SD064BPPA
RP-SD032BPPA
RP-SD016BPPA
BN-SDCAPE/1B
(For USA)
BN-SDCAPU/1B 
(For Canada)
BN-SDABPE/1B
(For USA)
BN-SDABPU/1B
(For Canada)
64 MB SD Memory Card 
32 MB SD Memory Card
16 MB SD Memory Card
USB Reader/Writer for 
SD Memory Card 
(compatible with 
MultiMediaCard)   
SD PCMCIA Adaptor 
(compatible with
MultiMediaCard)
PV-PD2100
 (USA only)Digital Video Printer
PV-GS50P.book  98 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							99
Palmcorder Accessory Order Form (For USA Customers)
In CANADA, please contact your local Panasonic dealer for more information on Accessories.
TO OBTAIN ANY OF OUR PALMCORDER ACCESSORIES YOU CAN DO ANY OF 
THE FOLLOWING: 
VISIT YOUR LOCAL PANASONIC DEALER 
OR 
CALL PANASONIC’S ACCESSORY ORDER LINE AT 1-800-332-5368 
[6 AM-5 PM M-F, 6 AM-10:30 AM SAT, PACIFIC TIME] 
OR 
MAIL THIS ORDER TO: PANASONIC SERVICES COMPANY ACCESSORY ORDER OFFICE 
20421 84th Avenue South Kent, WA. 98032
Ship To: 
Mr.
Mrs.
Ms.
First Last
Street Address 
City State Zip
Phone#: 
Day 
(       ) 
Night(       )
4. Shipping information (UPS delivery requires complete street address)         Please photocopy  this form when placing an order.
3. Method of payment (check one)
Check of Money Order enclosed (NO C.O.D.SHIPMENTS)      
VISA
MasterCard
Make Check or Money Order to: PANASONIC ACCESSORIES
(Please do not send cash)     2. Items Ordered  
Quantity Accessory # Price Each  Description
Total Price 
6.95
Subtotal
Your State & Local Sales Tax
Shipping & Handling
Total Enclosed
1. Palmcorder Model #   
DiscoverExpiration Date  Credit Card #  
Customer Signature 
Others
PV-GS50P.book  99 ページ  ２００３年２月１７日　月曜日　午後６時３０分 
						

							100
Before Requesting Service (Problems and Solutions)
If you are experiencing one of the following problems with your Digital Palmcorder, it may be something 
you can correct yourself. Check the list below for Problems and Solutions.
Problems Solutions
The Palmcorder power cannot be turned on.Is the power source connected correctly?
The Palmcorder power turned off 
automatically.If you leave the Palmcorder in Recording Pause 
Mode for more than 5 minutes, the power is 
turned off automatically to protect the tape and 
to save the Battery power.
The Palmcorder power does not stay on long 
enough.Is the Battery low? Charge the Battery or attach 
a fully charged Battery.
Something is wrong with the Palmcorder’s 
operation. The Palmcorder is turned on but no 
functions operate.Press the [RESET] Button on the Palmcorder 
with a pointed object. If this does not solve the 
problem, first disconnect the power supply and 
wait for a minute or so, and then reconnect the 
power supply to turn the power
back on. (If the above operation is performed 
when the [ACCESS] Lamp of the Card Slot is lit, 
the data on the Card may be damaged.)
Battery runs down quickly.≥Is the Battery fully charged? Charge it with the 
AC Adaptor.
≥Are you using the Battery in an extremely cold 
place? In cold places, the operating time of the 
Battery becomes shorter.
≥Has the Battery worn out? If the operating time 
is still too short even after the Battery is fully 
charged, the Battery has worn out.
The Battery cannot be charged.If the DC Cable is connected to the AC Adaptor, 
charging cannot be performed. Disconnect the 
DC Cable.
Recording does not start although power is 
supplied to the Palmcorder and the Cassette 
is correctly inserted.≥Is the accidental erasure protection tab on the 
Cassette open? If it is open (set to [SAVE]), 
recording cannot be performed.
≥Is the tape wound to the end? Insert a new 
Cassette.
≥Is the Palmcorder power turned on?
≥Is the [CAMERA] Lamp on? If the [CAMERA] 
Lamp is not on, no recording function can be 
operated.
≥Has condensation occurred? Wait until the 
[DEW DETECTED] Indication disappears.
PV-GS50P.book  100 ページ  ２００３年２月１７日　月曜日　午後６時３０分