Panasonic Kx Ta308 User Manual

							Press the desired Flexible CO 
button you wish to assign as 
the Log-In/Log-Out button.Dial 8.Press STORE.
8COAUTO DIAL
STORE
Station Programming (Personal Programming)2-13
2.2 Station Programming (Personal Programming)
PT
•The STORE indicator lights.
•The display shows the initial programming mode.

Group Log In/Out
Log-In/Log-Out Button (Assignment)
Allows you to assign a Flexible CO button as the Log-In/Log-Out button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Feature Reference
Log-In/Log-Out 
						

							2-14Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
One-Touch Dialing Button (Assignment)
Allows you to assign a Flexible button (CO, MESSAGE) as a One-Touch Dialing button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible button you wish 
to assign as a One-Touch Dialing button and 
then dial 2.Press STORE. Enter the desired number 
(extension number, 
phone number, etc.).
desired number+
))
2MESSAGE
COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.
Not Stored
•Up to 24 digits can be stored.
•To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
•The number can be an extension number, telephone number or feature number. Up to
twenty-four digits can be stored in a One-Touch Dialing button.
•To store the telephone number of an external party, a line access code (9 or 81 through
83) must be stored as the first digit.
•You can store a number consisting of twenty-five digits or more by dividing and
assigning it into two One-Touch Dialing buttons. In this case, the line access code
should be stored in the first button.
•To store an account code, press  and then enter the desired code. The account
codes must be stored after the line access code.
•You can use 0 through 9,  , #, PAUSE and INTERCOM for storing.
#: change the dialing mode (Pulse to Tone)
PAUSE: pause
INTERCOM: secret 
						

							Station Programming (Personal Programming)2-15
2.2 Station Programming (Personal Programming)
PT
Press the desired Flexible 
CO button you wish to assign 
as the O-CO button.Press STORE.
Dial    .
COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming
mode.
Other CO Key
— To exit the Station Programming mode, press the PROGRAM button.
Other-CO (O-CO) Button (Assignment)
Allows you to assign a Flexible CO button as the Other-CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
Return to Message Waiting (MESSAGE) Button (Assignment)
Allows you to restore the message waiting feature to the Message Waiting (MESSAGE)
button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the MESSAGE button 
you wish to restore.Dial 3.Press STORE.
3MESSAGEAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming
mode.
Message Waiting
— To exit the Station Programming mode, press the PROGRAM button.
Feature Reference
Message Waiting 
						

							2-16Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
SAVE Button (Assignment)
Allows you to assign a Flexible CO button as the SAVE button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press the desired Flexible CO 
button you wish to assign as 
the SAVE button.Dial 5.Press STORE.
5COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming mode.

Save Button
— To exit the Station Programming mode, press the PROGRAM button.
Feature Reference
Redial, Saved Number 
						

							Station Programming (Personal Programming)2-17
2.2 Station Programming (Personal Programming)
Single-CO (S-CO) Button (Assignment)
Allows you to assign a Flexible CO button as a Single-CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
•You can assign the same outside (CO) line to an S-CO and G-CO button.
PT
Press the desired Flexible 
CO button you wish to assign 
as an S-CO button.Dial 0.Press STORE. Enter the outside (CO) line 
number (1 through 3).
outside line (CO) no.0COAUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.
CO—

outside (CO) line number
•To erase an incorrect entry, press the TRANSFER (CLEAR) button.
(The TRANSFER button becomes the CLEAR button during programming.)
CO—x 
						

							2-18Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Intercom Alert Assignment
Allows you to select the alert mode (tone/voice) when receiving an intercom (extension)
call.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Dial 4.Press STORE.
or
Dial 1 or 2.
1 : to select the Ring-Calling (Tone Call) mode
2 : to select the Voice-Calling mode
124
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial programming mode.
— To exit the Station Programming mode, press the PROGRAM button.
Condition
•The default is “Ring-Calling (Tone Call)”.
•The display shows the current status.

• When Ring-Calling (Tone Call) mode is selected;
• When Voice-Calling mode is selected;
Voice Call
Tone Call 
						

							Station Programming (Personal Programming)2-19
2.2 Station Programming (Personal Programming)
Outside (CO) Line Ringing Selection
You can select whether the extension will ring or not when an outside call is received at
your extension.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Press STORE. Dial 3.
Enter the outside (CO) line numbers 
you want to ring (1 through 3).
outside (CO) line no.3
AUTO DIAL
STORE

RNG:1,2,3
— To exit the Station Programming mode, press the PROGRAM button.
Conditions
•The “Flexible Ringing Assignment” should be set to “Enable”. (Refer to System
Programming.)
•When an outside call is received at extension but doesn’t ring, the CO indicator will
flash. If you want to answer the outside call, press the flashing CO button.
Programming Reference
•System Programming — Installation Manual
[408]–[410] Flexible Ringing Assignment — Day/Night/Lunch
•The STORE indicator lights.
•The display shows the initial
programming mode. 
						

							2-20Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Incoming
Allows you to select the method used to answer incoming outside calls from the
following three line preferences.
1.) No Line Preference
2.) Ringing Line Preference (— default)
3.) Prime Line Preference
Follow the corresponding programming procedure according to your selection.
No Line Preference — Incoming (Assignment)
No line is selected when you go off-hook. You must select a line to answer an incoming
call by pressing a CO button.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
PT
Dial 1.Press STORE. Dial 2.
12
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.•The display shows the current
status.

Pref. In :No 
						

							Station Programming (Personal Programming)2-21
2.2 Station Programming (Personal Programming)
Ringing Line Preference — Incoming (Assignment)
When you go off-hook, you can answer any call ringing at your telephone.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button. — To exit the Station Programming mode, press the PROGRAM button.
Prime Line Preference — Incoming (Assignment)
When you go off-hook, you can answer a call on the line which is assigned as the prime
line.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
PT
Dial 2.Press STORE. Dial 2.
22
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.•The display shows the current
status.

Pref. In :Ring
PT
Dial 3. Dial 2.Press STORE. Enter the outside (CO) line number 
(1 through 3).
outside (CO) line no.23
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.•The display shows the current status.

outside (CO) line number
Pref. In :CO-x 
						

							2-22Station Programming (Personal Programming)
2.2 Station Programming (Personal Programming)
Preferred Line Assignment — Outgoing
Allows you to select the desired outgoing line preference to originate calls from the
following three line preferences.
1.) No Line Preference (— default)
2.) Idle Line Preference
3.) Prime Line Preference
Follow the programming procedure according to your selection.

When setting “Idle Line Preference” or “Prime Line Preference”, you cannotaccess any
PT features after going off-hook. To access these PT features, press the INTERCOM
button before or after going off-hook.
No Line Preference — Outgoing (Assignment)
When going off-hook, you are not connected to any line. You must choose the line.
— Be sure that you are in the Station Programming mode. Press the PROGRAM button.
— To exit the Station Programming mode, press the PROGRAM button.
PT
Dial 1.Press STORE. Dial 1.
11
AUTO DIAL
STORE
•The STORE indicator lights.
•The display shows the initial
programming mode.•The display shows the current
status.

Pref. Out:No