Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

Document Version  2013-05  
Operating Manual 161 1.4.4 System Feature Access Pager No. >           
     
      
 EXIT          SET
->External BGM
  Paging
  External Relay ON
  Call Back Cancel
  Call Pickup Directed    
              EXIT          ENTER
    External BGM 1 - 2           
     
      
 
[External BGM]
Enter BGM number
and press
Press              or ENTER
 BGM No. >           
     
      
 EXIT          SET
Enter pager number and
press            
 Door No. >...

162 Operating Manual
Document Version  2013-05  1.4.4 System Feature Access Relay No. >           
     
      
 EXIT          SET
[External Relay ON]
Enter relay number
and press
Press              or ENTER
 Group No. >           
     
      
 EXIT          SET
Pager01           
     
      
  
[Paging]
Enter paging group
number and press
Press              or ENTER
  External BGM
->Paging
  External Relay ON
  Call Back Cancel
  Call Pickup Directed    
              EXIT          ENTER
  External...

1.5  Using a KX-HGT100 SIP Extension
1.5.1  Operation List
To access PBX features, the access numbers (extension numbers or feature numbers) are required.
KX-HGT100 (firmware version 2.00
 or later) users can use the following features:Note
•To 

execute an operation, you must press the OK button after pressing all the buttons of the operation.
• If these feature numbers do not work properly with the KX-HGT100, ensure that the firmware of the
KX-HGT100 and the MPR software file version of the PBX are...

Features
Refer to
Calling Line Identification Restriction 
(CLIR) 1.3.54  Private Network Features—CLIR (Calling Line
Identification Restriction)
Calling/Connected Line Identification
Presentation (CLIP/COLP) 1.3.53  Private Network Features—CLIP (Calling Line
Identification Presentation)
1.3.55  Private Network Features—COLP (Connected Line
Identification Presentation)
Call Forwarding (FWD)/Do Not Disturb 
(DND)—Intercom/Outside Calls 1.3.20  DND (Do Not Disturb)  Switching FWD/DND Status Using Fixed...

1.5.3  Private Network Features—Displaying Your Telephone
Number on the Called Party’s Telephone
When making a call through a private network, you can present your telephone number
to the called party. The number assigned to your extension will be displayed on the
display of the other party’s telephone. To show
To prevent your number from being shown
Availability of this feature depends on the following:
•
The ISDN service of the other party’s telephone company
• The telephone service of the other party...

1.6  Cellular Phone Features
1.6.1  Cellular Phone Features
When 
you are not at your desk or not in the office and receive a forwarded outside call on your cellular phone,
you can use the following features if enabled through system programming.
–  Transferring to an Extension in the PBX
–  Adding Other Parties during a Conversation (Conference)
–  Talking to Two Parties Alternately (Call Splitting)
–  Paging and then Transferring a Call
–  Transferring to a Private Network (TIE Line Access)
–...

 Transferring to a Private Network (TIE Line Access)
During conversation, you can make a call to extensions connected to other PBXs in a private network, and
you can transfer call to it.
To transfer •
When transferring a call from an analogue CO line, you cannot talk to the destination party
after dialing an extension number or 7 + private phone number.  Transferring to an Outside Phone Number
During conversation, you can make a call to outside phone number, and you can transfer call to it.
To transfer...

 Adding Other Parties during a Conversation (Conference)
To establish a conference call  Talking to Two Parties Alternately (Call Splitting)
168 Operating Manual
Document Version  2013-05  1.6.1 Cellular Phone Features Cellular Phone
Talk with multiple parties.
Enter 3. Talk to the 
new party.
3
During a conversation
C.Tone
Enter #. Enter #. Dial extension number.
extension no.D.Tone  Cellular Phone
During a conversation
Talk to the 
other party.Talk to the 
original party.
OR
The other party will be on...

 Paging and then Transferring a Call
Document Version  2013-05  
Operating Manual 169 1.6.1 Cellular Phone Features Announce.
Talk.On-hook.
During a conversation
Cellular Phone
Enter     33.
Wait for an 
answer.
The held party and the paged extension 
are connected and start a conversation.
The party is placed on hold.
Dial paging group
number (2 digits).
paging group 
no.33C.ToneD.Tone
Enter #.   

170 Operating Manual
Document Version  2013-05  1.6.1 Cellular Phone Features