Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

4.2  Feature Number Table
4.2.1  Feature Number Table
Numbers 
listed below are the default settings. There are flexible feature numbers and fixed feature numbers.
If you change the flexible feature numbers, fill in your assigned numbers  (new) in the list for future reference.
Feature (While dial tone is heard) Default
(New) Additional digits/buttons
1.2.1  Making Calls     Operator Call
0
( 

      )  
Automatic Line Access 9
( 

      ) outside phone no.
CO Line Group Access 8
( 

      ) CO line...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
– Group 40
( 
      ) group no. (2 digits)
– Directed 41
( 

      ) extension no.  Call Pickup Deny 720
( 

      )  
– To deny 1
– To allow 0
1.3.11  Call Transfer     Transferring to an Outside Party Using
the SIP Service    
– Blind Transfer 61
( 

      ) phone no. + #
1.3.12  CALL WAITING FEATURES     Answering Call Waiting in the PBX 50
( 

      )    Answering Call Waiting from the
Telephone Company 60
( 

      )  
1.3.13...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons  Calling through DISA
   
– To an extension
(In All Security Mode only) 47
( 
      ) your extension no./(  + verification code) +
extension PIN/verification code PIN +
extension no.
– To an outside party
(In Trunk Security Mode/All Security
Mode only)   your extension no./(  + verification code) +
extension PIN/verification code PIN +
outside phone no.
1.3.20  DND (Do Not Disturb)    
– Both Calls 710
( 

      ) 0 (Cancel)/
–...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
– Both Calls 710
( 
      ) 0 (Cancel)/
– Outside Calls 711
( 

      ) 2 (All calls) + phone no. + #/
– Intercom Calls 712
( 

      ) 3 (Busy) + phone no. + #/
4 (No Answer) + phone no. + #/
5 (Busy/No Answer) + phone no. + #/
7 (Follow Me) + your extension no./
8 (Follow Me Cancel) + your extension no.
– To set the timer for "No Answer" and
"Busy/No Answer" 713
( 

      ) 00–99 (second)
Call Forwarding (FWD)...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
For an extension leaving a message waiting
indication 70
( 
      )  
– To leave/cancel 1/0 + extension no.
For an extension receiving a message
waiting indication  
– To call back 2
– To clear 0 + your extension no.
1.3.48  Paging     Group Paging 33
( 

      ) paging group no. (2 digits)
– To answer 43
( 

      )  
– To deny 721
( 

      ) 1
– To allow 0
1.3.49  Paralleled Telephone 39
( 

      )  
– Ring 1
– No Ring 0...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
1.5.3  Private Network Features—Displaying
Your Telephone Number on the Called
Party’s Telephone    
– To prevent 67
( 
      )  
– To show 68
( 

      )  
1.3.57  Private Network Features—TIE Line
Access 7
( 

      ) private phone no.
1.3.59  Redial, Last Number #
( 

      )  
1.3.62  Speed Dialing, Personal    
– To store 30
( 

      ) personal speed dialing no. (2 digits) +
outside phone no. + #
– To dial (        )  +...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
– Intercom Calls 712
( 
      ) 3 (Busy) + floating extension no. for the
SVM feature
*2
 + #/
4 (No 
Answer) + floating extension no. for the
SVM feature *2
 + #/
5 (Busy/No 
 Answer) + floating extension no.
for the SVM feature *2
 + #
1.3.65  TAFAS (Trunk Answer From Any
Station)    
– Calls through an external speaker 42
( 

      ) [For KX-NCP series PBX users]
1
[For KX-TDE series PBX users]
speaker no. (1 digit)
1.3.66...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
– To make a call or set features through
DISA    
1.3.75  Walking Extension 727
( 
      ) your extension no. + extension PIN
1.3.76  Walking Extension, Enhanced 727
( 

      )  
– To set an extension status to Service-out #
– To set an extension status to Service-in  + your extension no. + extension PIN
1.3.78  Wireless XDP Parallel Mode 48
( 

      )  
– To set 1 + paired wired extension
– To cancel 0
2.1.2  External BGM...

Feature (While dial tone is heard)
Default
(New) Additional digits/buttons
2.1.6  Time Service Mode Control *7 780
( 
      )  
– Day/Night/Lunch/Break 0/1/2/3*1
Supervisor only
*2 The default floating extension number for the SVM feature is 591.
*3 The default voice mail floating extension number is 500.
*4 Hotel operator only
*5 Manager only
*6 The default of OGM floating extension numbers is 5xx 

(xx: two-digit number of message).
*7 Manager and preprogrammed extension user only
Feature (While busy,...

4.3  Tone
4.3.1  Tone
While on-hook
Ring Tones
The following tones are
programmable allowing
recognition of call type 
(Outside,
Intercom or Doorphone).  
Tone 1 Tone 2
Tone 3
Tone 4
When going off-hook
Dial Tones  
Tone 1
Normal 220 Operating Manual
Document Version  2013-05  4.3.1 Tone1 s 1 s 1 s 1 s 1 s