Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

Item
Programming
Input Selection & Parameter
Your extension
information *1   PT: The display shows the PBX or shelf number, slot
number and port number.
 
PS: The display shows the PS number.

Display Contrast
Selection
*2
Preferred display contrast
level from the 4 levels
available    Light
 Little Light
 Little Dark
 Dark
Display Language
Selection
Which display language do
you prefer?  English
 2nd Language
 3rd Language
 4th Language
 5th Language
Display Switching Mode
Would you like the call...

Item
Programming
Input Selection & Parameter
Display Backlight
Selection *2*3
Would 
you like to turn on the
display backlight of the
telephone?    Yes—Automatic
 Yes—always On
 No—always Off
Self Labeling Display
Contrast
Preferred display contrast
level from the 4 levels
available for Self Labeling 
(KX-NT366 only)    Light
 Little Light
 Little Dark
 Dark
Hot Line
Would you like to dial a
preset number simply by
going off-hook?   desired no. (max. 32 digits)
   Do not use
 Use
Calling Line...

Item
Programming
Input Selection & Parameter
Preferred Line
Assignment—Outgoing
Which do you prefer to
seize  when you go off-hook
to make calls?    No line
 An idle CO line
 +
CO button no.
(01–36) *4
/(01–84) *5
or  A CO/ICD Group button
or  Intercom (On a PDN
extension, an idle PDN button is
selected when going off

-hook.)
Preferred Line
Assignment—Incoming
Which line do you prefer to
answer when you go
off-hook?    No line
 The longest ringing line 
(when multiple calls arrive) +
CO button no....

Item
Programming
Input Selection & Parameter
Forced Answerback
Selection *2
Do you prefer to answer a
call without going off
-hook
regardless of the AUTO
ANS button status?    No—Disable
 Yes—Enable
Live Call Screening Mode
Set *2
Which 

service do you prefer
when a calling party is
recording a message in
your mailbox?    You can monitor the message
through the telephone speaker. 
(Hands-free mode)  Only an alarm tone is heard. 
(Private mode)
LCS Mode Set (After
Answering)
Would you like to keep...

Item
Programming
Input Selection & Parameter
Call Forwarding (FWD)/
Do Not Disturb (DND)
To forward or refuse some
or all of your incoming calls (for both calls)
 
(for outside calls)
 
(for intercom
calls)  Off
 Do Not Disturb (DND)
+ desired
no.
(max. 32 digits)  All—Forward all calls
+ desired
no.
(max. 32 digits)  Busy—Forwarded when your
extension is busy. + desired
no.
(max. 32 digits)  No Answer—Forwarded 
when
you do not answer. + desired
no.
(max. 32 digits)  Busy/No Answer—Forwarded
when you do...

Item
Programming
Input Selection & Parameter
Background Music 
(BGM) *2
Do you want background
music through your
telephone speaker while
on-hook?    No—Off
 + BGM no.
(1 digit)  Yes—On
Bluetooth Registration *8
To register a Bluetooth
wireless headset on your
extension *9   Pass key (max. 16 digits)
Bluetooth Removal *8
To  cancel the registration of
a Bluetooth wireless
headset on your extension *9   Confirm that the ID of your Bluetooth wireless headset is
displayed.
Extension PIN (Personal...

Item
Programming
Input Selection & Parameter
One-touch Dialing
Assignment Mode
Selection
Do you prefer to set the
One-touch dialing only?    No—Normal (Any Flexible
buttons can be modified.)  Yes—Only One-touch dialing
buttons can be modified.
However, 
to modify them, there is
no need to enter "2" before the
number. *1
Not available for some IP-PTs depending on the card in the PBX that the IP
 -PT is connected to.
*2 Not available for a PS.
*3 Only available for the...

To store the names and numbers in personal speed dialing
•
* To enter characters, refer to "1.3.14  Character Entry". 188 Operating Manual
Document Version  2013-05  3.1.2 Personal ProgrammingPress PROGRAM
or PAUSE.Enter 10 and then press ENTER.
Or press STORE.Enter personal speed dialing number 
(location number) (2 digits).
personal speed 
dialing no. (location no.)
Enter phone number 
(max. 32 digits).Enter name 
(max. 20 characters).
name
Press PROGRAM
or PAUSE.
phone no.
OR
PROGRAM
PAUSE
01...

To edit the names and numbers of personal speed dialing
3.1.3  Programming Feature Clear
You  can reset the settings of the following features on your extension to the default settings with one operation.
Features Default Setting
Display Switching Mode Automatic
Hot Line Off
Calling Line Identification Restriction (CLIR) Allow
Calling/Connected Line Identification Presentation (CLIP/COLP) Caller ID assigned on your
extension
Preferred Line Assignment—Outgoing Intercom
Preferred Line Assignment—Incoming...

Features
Default Setting
LCS Mode Set (After Answering) Stop recording
Automatic Call Waiting On
Manual Call Waiting—Intercom Calls On (Tone)
Call Waiting Tone Type Selection Tone 1
Absent Message Off
Personal Absent Message Cleared
Call Forwarding (FWD)/Do Not Disturb (DND)—Intercom Calls/
Outside Calls Off
FWD N/A Timer 15 seconds
Call Pickup Deny Allow
Headset Operation Headset off
Executive Busy Override Deny Allow
Paging Deny Allow
Key Pad Tone Set On
Background Music (BGM) Off
Data Line Security...