Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

•
Whisper  OHCA is only available with certain digital proprietary telephones and IP proprietary
telephones. In addition, both you and the other party must use supported telephones.
• Whisper OHCA is not available for outside calls; only call waiting tone can be set  (refer to
"1.3.13  Call Waiting Tone").
• A PDN extension can only receive OHCA or Whisper OHCA from the corresponding SDN
extension. When a call is made from another extension, a PDN extension will receive a call
waiting tone. ( ®...

1.4  Display Features
1.4.1  Call Log, Incoming
When you receive an outside call, an external sensor call or extension call *1
, call information is recorded
automatically in the incoming call log. A preprogrammed number of calls can be logged per extension. When
the call log is full and another call arrives, the oldest call is deleted.
When the Call Log button light turns on, there is a call which you did not answer.
The following information is logged. *1
Incoming  calls from extensions can be recorded...

The incoming call log information is displayed as follows:
To view the log information with the Call Log button
To view the log information with the Navigator key
Document Version  2013-05  
Operating Manual 153 1.4.1 Call Log, Incoming*: New is displayed for call logs which have not previously been viewed;
    Old is displayed for call logs which have previously been viewed. 
[With Callers Name]
Catherine
 OCT.27  4:30PM   THU
New : Not Answered
1234567
    
             EXIT   CLEAR
---------------...

To clear the log information
To call
•
The Call Log button light shows the current status as follows:
Off: No incoming call, or you have already viewed the call log.
Red on: You have missed calls to view.
• If 
your call is answered by another extension, the caller’s information is recorded in the logs
of both your extension and the answering extension.
• You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged...

To call
•
The following PSs can display incoming call log information from other extensions (including
TIE) with same information as a PT connected to the PBX.
– KX-TCA185/KX-TCA285/KX-TCA385
• PSs other than these may not display the same incoming call log information as a PT
connected to the PBX.
• For details about referencing the incoming call log using the PS's navigator key, refer to the
PS's documentation.
To call with the REDIAL button •
* System programming is required for this...

•
You can lock your call log display by using an extension PIN (Personal Identification Number),
so that you can prohibit access to your logged information. Refer to  "3.1.2  Personal
Programming".
• If a call arrives while you are using the call log, the call log display will be replaced with the
caller’s information.
• PS user: Refer to "Operating Instructions" for the PS.
• KX-NT400 user: Refer to "Operating Instructions" for the KX-NT400.
• You can record outgoing calls to...

1.4.3  Directories
You can select and call using the directories  (Personal Speed Dialing Directory, System Speed Dialing
Directory and Extension Number Directory ).
Only personal directories can be stored, edited or deleted on your extension.
If a call arrives while you are using a directory, the display will be replace with the caller ’s information.
–  Calling with the Directory
–  Storing New Names and Numbers
 Calling with the Directory
To select and call •
* The display order is as follows:
One...

•
Telephone  number and name on the display are stored using the first spare Personal Speed
Dialing memory available.
• PS user: Refer to "Operating Instructions" for the PS. •
To enter characters, refer to "1.3.14  Character Entry".
• For more details, refer to "To store the names and numbers in personal speed dialing

" in
"3.1.2  Personal Programming".
1.4.4  System Feature Access You can access commonly used features with the 
 "Feature Access" menu.158...

To select a feature from the "Feature Access" menu
Features
Description
Call Back Cancel You can cancel Automatic Callback Busy.
(® 1.3.4  Automatic Callback Busy (Camp-on)
)
Call Pickup Directed You can pick up a call ringing at a specified extension. (® 1.3.9  Call Pickup)
Call Pickup Group You can pick up a call ringing at another extension within a call pickup group.
(® 1.3.9  Call Pickup)
Doorphone Call You can call a doorphone.
(® 1.3.22  Doorphone Call

)
Door Open You can open a door.
(®...

160 Operating Manual
Document Version  2013-05  1.4.4 System Feature Access Sure?           
     
       
 NO          YES
->Call Back Cancel
  Call Pickup Directed
  Call Pickup Group
  Doorphone Call
  Door Open    
              EXIT          ENTER
 Call Back Cancelled           
     
 Extension No. >           
     
      
 EXIT          SET
  Call Back Cancel
->Call Pickup Directed
  Call Pickup Group
  Doorphone Call
  Door Open    
              EXIT          ENTER
 12341115678...