Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

 Paging Deny
You can set your extension not to receive paging announcements. 1.3.49  Paralleled Telephone
A digital proprietary telephone extension user can choose whether the single line telephone
connected in parallel will ring or not, when an incoming call is received.
(Default: Ring) •
Even if "No ring" is selected,  calls can be made and answered on the single line telephone
by lifting the handset.
• If you go off-hook while your paralleled telephone is in use,  the call will switch over to...

1.3.50  PDN (Primary 
Directory Number)/SDN (Secondary Directory
Number) Extension
Primary Directory Number (PDN) buttons and Secondary Directory Number  (SDN) buttons
are useful when extension users will handle calls for other extensions. For example, a
secretary 

or multiple secretaries can handle calls and check the call status of a boss or multiple
bosses. The functions of PDN and SDN buttons are as follows:
PDN button: This button can be used to make and receive all calls (including both outside...

Light Pattern
PDN Button Status SDN Button Status
Flashing red
rapidly The PDN extension is receiving an
incoming call to an incoming call
distribution (ICD) group. The corresponding PDN extension is
receiving an incoming call. SDN Direct Dial
Using an SDN button, you can easily call the corresponding PDN extension. SDN buttons are in one of two
modes depending on system programming, and the operation procedure differs as follows:
Enhanced DSS Key Mode Standard SDN Key Mode
•
When performing SDN Direct...

Call Hold Retrieve
•
If a call is not retrieved within a specified time,  you will hear an alarm as a reminder (Hold
Recall).
If an outside call is not answered within a specified time, it is automatically disconnected. •
If Automatic Call Hold  has been preprogrammed, you can put the current call on hold
automatically by pressing another PDN button to make or answer another call.  Call Transfer Using SDN Button
You can transfer a call to a PDN extension with a simple operation using a corresponding SDN...

•
System  programming is required to use this feature during a conversation with an extension.
• * When an SDN button is in Standard SDN Key Mode, you have to press the SDN button
twice to transfer the call, unless you used that SDN button to answer an incoming call. Customizing Your Phone
•
3.1.2  Personal Programming

—Preferred Line Assignment—Incoming
Select the seized line when going off hook.
• 3.1.2  Personal Programming—Preferred Line Assignment—Outgoing
Select the seized line when going...

1.3.52  Privacy Release
You can let a third party join your current outside call and establish a three-party  conversation.
You can also leave the conversation and then let the two other parties talk. To let a third party join your conversation and establish a three
-party conversation•
Only an S-CO button can be used for this operation.
• You can leave a three

-party conversation and let the two other parties talk by simply going
on-hook.
1.3.53  Private Network Features—CLIP (Calling 
 Line...

To show either the number assigned to the CO line or your extension
•
When you forward a call to an outside party, the CLIP number for that call will be that of the
calling party or of the forwarding extension depending on system programming. •
If you use the ICD Group button to make a call to the other party, the telephone number
assigned to the ICD group will be used.
1.3.54  Private Network Features—CLIR (Calling 
 Line Identification
Restriction) When making a call through a private network, you can...

1.3.55  Private Network Features—COLP (Connected Line
Identification Presentation)
When receiving a call through a private network, you can present your preprogrammed telephone number to
the calling party.
You 
can select the telephone number sent, either the number of the line used or the number assigned to your
extension.
If you select "Public", the calling/called party sees the number of the line used  (subscriber’s number).
If you select "Your extension", they see the telephone number...

1.3.57  Private Network Features—TIE Line Access
You can access extensions connected to other PBXs in a private network.
To call •
* Which type of telephone number must be entered depends on the settings of your PBX.
To call with one touch •
To start monitoring another PBX extension after customizing an NDSS button,  go
off-hook, press the NDSS button, and go on-hook.
The NDSS button light will show the current status as follows:
Off: The extension is idle.
Red on: The extension is busy. Customizing Your...

1.3.58  Quick Dialing
You can make a call simply by pressing the preprogrammed number for quick dialing. •
This is a useful feature for hotels.
For example, to dial Room Service, dial the digit 
"3", not the full extension number.
1.3.59  Redial, Last Number This is convenient when calling the same outside party again. •
If 
you want to log outgoing intercom calls to the outgoing call log, consult your System Installer
or Administrator.
• If you have seized a CO line, pressing the REDIAL button...