Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

 Headset Operation
You can have a conversation using a headset.
In this case, you must select "Headset on" in programming mode or set the Headset button
on (red) in advance.
This feature is also known as Handset/Headset Selection. To talk using the headset
To use the handset during a conversation using the headset
To talk in hands-free mode during a conversation using the headset
•
The Headset button light shows the current status as follows:
Off: Headset mode off
Red on: Headset mode on Document...

•
For KX-NT560/KX-NT400/KX-NT300  series (except KX-NT321)/KX-DT343/KX-DT346
telephone users:
• With KX-NT560/KX-NT400/KX-NT300 series (except KX-NT321)/KX-DT343/KX-DT346
telephones, you can use a Bluetooth wireless headset registered on your extension as
a headset.
• Operating Distance
Please keep the telephones with connected Bluetooth Modules, 3 m  (9 ft 10 in) or more
apart from each other. Also, if a Bluetooth headset is in use near a telephone with a
connected Bluetooth Module, other than the one...

To transfer a call
To talk to a waiting caller
To transfer an outside call to an extension with a one-touch operation
To end a conversation
Document Version  2013-05  
Operating Manual 93 1.3.33 Headset OperationPT
During a conversation
Press DSS or dial desired
phone number.
The called
party answers.
Seize CO line before 
dialing outside phone number. Press TRANSFER.
TRANSFER
Press Release.
(Release)
(DSS)
desired 
phone no.
OR Press Answer.Talk.
PT
While hearing a call waiting tone
(Answer) Press DSS....

Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit an Answer button or a Release button.
1.3.34  HOSPITALITY FEATURES In a hotel-type environment, an extension assigned as a hotel operator can be used to view and set the
check-in/check-out/cleaned
-up (Ready or Not Ready) status of each guest room extension. This allows the
hotel operator to manage guests and rooms with just a telephone. In addition, the hotel operator can set timed
reminders remotely for guest rooms.
Features...

To dial
•
To call another party , dial the desired party’ s phone number before the preprogrammed
number is dialed.
• You should assign the intercom line as the seized line when going off-hook. (Preferred Line
Assignment—Outgoing)
• It is possible to increase the delay before Hot Line is activated through system programming.
This can be useful if you require more time after going off-hook to dial another telephone
number or extension number. Customizing Your Phone
•
3.1.2  Personal Programming...

1.3.37  ICD Group Features—Call Log History for ICD Group
An extension assigned as a supervisor (supervisor extension) can confirm the incoming call
log for the incoming call distribution  (ICD) group.
To perform this operation, the supervisor has to enter incoming call queue monitoring mode
first. To enter incoming call queue monitoring mode
To confirm the Call Log History
96 Operating Manual
Document Version  2013-05  1.3.37 ICD Group Features—Call Log History for ICD Group On-hook.
Enter ICD Group...

To clear Call Log History
•
If the accumulated data exceeds the maximum number that can be displayed  (99999),
"****" is shown on the display. To reinitialize the display, clear the Call Log History.
• For information about other supervisory features, refer to "1.3.42  ICD Group
Features—Supervisory".
1.3.38  ICD Group Features—Incoming Call Queue Monitor An extension assigned as a supervisor (supervisor extension) can monitor the status of
waiting calls to be answered in the queue for an...

•
For information about other supervisory features, refer to  "1.3.42  ICD Group
Features—Supervisory".
1.3.39  ICD Group Features—Log-in/Log-out You can control your status in an incoming call distribution
(ICD) group. When in the Log
 -out mode, incoming calls to
the group will not ring at your extension. When you return,
calls will again ring at your extension. (Default: Log-in)
Even if your extension is logged-in, you can have a
specified time period (wrap-up time) when you will not
receive...

To enter/leave Not Ready mode
To set/cancel Not Ready mode or to leave Wrap-up mode (To enter Ready mode)
Document Version  2013-05  
Operating Manual 991.3.39 ICD Group Features—Log-in/Log-outWhile on-hook
PT/PS
Press Log-in/Log-out.
(Log-in/Log-out)
Specified
OR
All
ICD Group
extension no.
Enter ICD Group extension 
number or     .
ICD Group: Incoming Call Distribution Group While on-hook
PT/PS
Press Log-in/Log-out of a Specified Group.
(Log-in/Log-out
of a Specified Group) PT/SLT/PS/SIP Extn.
On-hook....

•
* The status will be as follows:
Ready ® Not Ready
Not Ready ® Ready
Wrap-up ® Not Ready
• The Log-in/Log
-out of a specified group button light shows the current status as follows:
Off: Log-in mode
Red on: Log-out mode
• The Wrap-up button alternates the setting of Wrap-up mode, Not Ready mode or Ready
mode.
The Wrap-up button light shows the current status as follows:
Off: Ready mode
Red on: Not Ready mode
Flashing red : Wrap-up mode
• In Wrap-up mode/Not Ready mode, your extension does not receive...