Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

 Answering Call Waiting from the Telephone Company
This is an optional telephone company service. You can receive a call waiting tone with the caller ’s name or
telephone number information. For details, consult your telephone company. •
To return to the original party , repeat the operation.
• In this case, the FLASH/RECALL button on proprietary telephones must be set to
External Feature Access (FEFA) mode through system programming.
• The caller’s telephone number will not be displayed on telephones or...

To set/cancel for outside calls (Automatic Call Waiting)
•
To change the tone from a PT, refer to "3.1.2  Personal Programming". •
For information about answering a waiting call, refer to  "1.3.12  CALL WAITING
FEATURES".
1.3.14  Character Entry You can enter the following characters. The tables show you the characters available for each button. Table
1 or Table 2 can be programmed. 52 Operating Manual
Document Version  2013-05  1.3.14 Character EntryOff-hook.
Enter 0 or 1.On-hook....

Table 1 (Standard mode)
Document Version  2013-05  
Operating Manual 53 1.3.14 Character Entry  

Table 2 (Option mode)
 To enter "Ann"
Note
•To erase the character on the cursor, press CLEAR.
• To move the cursor to the left, press  .
• To 
move the cursor to the right, press  . When entering two or more characters that use the same
button 

consecutively (e.g. "G" and "I"), you must press this button or the FWD/DND button after entering
the first character.
• If the SELECT button is pressed, the characters for each button will be displayed in reverse order.
• To toggle...

1.3.15  Conference
–Conference
– Leaving Three
-party Conference Conference
You can add one or more parties to your conversation.
To establish a conference call Document Version  2013-05  
Operating Manual 55 1.3.15 Conference Press CONF. Dial desired 
phone number.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk with 
multiple parties.
During a conversation
desired 
phone no.
Talk to the 
new party.CONF
Press CONF
or TRANSFER.
OR
CONF
TRANSFERC.ToneC.Tone Dial desired
phone number....

To establish a conference call when receiving a call from an outside party during a two-party
conversation
56 Operating Manual
Document Version  2013-05  1.3.15 ConferenceDial desired
phone number.
desired 
phone no.
SLT
Talk with multiple parties.
Enter 3. Press Recall/
hookswitch.Talk to the 
new party.
3
During a conversation
Seize CO line before 
dialing outside phone number.
Press Recall/
hookswitch.
C.Tone PT/PS
Press HOLD.
During a conversation
HOLD
Press flashing CO,
PDN, or SDN.Talk to the
new...

To add four or more parties to a conference
To add another party on hold to a conference
To talk to two parties alternately in a three-party conversation
Document Version  2013-05  
Operating Manual 57 1.3.15 ConferencePress CONF. Press CONF. Dial desired 
phone number.
desired 
phone no.
Seize CO line before 
dialing outside phone number.
PT/PS
Talk.
During a conversation
Talk.
To continue
CONFCONF
C.Tone PT/PS
During a 3- to 7-party conference
Press flashing CO, ICD Group,
PDN, or SDN corresponding to...

To disconnect one party and then talk to the other in a three-party conversation
•
* In this case, the FLASH/RECALL button on a proprietary telephone must be set to
Flash/Recall mode through system programming.
• During a three-party conversation, pressing the TRANSFER button or Recall/
hookswitch alternates between the two other parties in the conversation.
• You can have a conference with a maximum of eight parties 
(comprising intercom or
CO lines) simultaneously.
• During a conversation involving...

To leave a conference involving at least one other extension
To leave a conference involving two outside parties
•
To leave a conference call involving two outside parties and have the conversation continue,
your extension must be enabled to transfer calls to CO lines through COS programming.
1.3.16  Conference, Unattended The person who originated a conference can leave the conference, and allow the other parties
to continue the conversation. Document Version  2013-05  
Operating Manual 59 1.3.16...

To leave a conference
To return while others are talking
To complete a conversation
•
Time limit
Both 
parties will hear an alarm tone before a specified timeout. The originating extension user
will hear an alarm tone before timeout. The call is disconnected when the timer runs out
unless the originating extension returns to the conference. Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit a Conference button. 60 Operating Manual
Document Version  2013-05  1.3.16 Conference,...