Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

To alternate between the parties leaving one party on hold temporarily
To leave the conversation and then let the two parties talk
Document Version  2013-05  
Operating Manual 41 1.3.10 Call SplittingPT/PS
During a conversation
Press 
TRANSFER. Talk to the 
other party.Talk to the 
original party.
TRANSFER
Press DSS or dial the other
partys extension number. Press 
TRANSFER.
TRANSFER
C.Tone
The other party will be on hold.
extension no.
(DSS)OR SLT
During a conversation
Talk to the 
other party.Talk to...

1.3.11  Call Transfer
–  Transferring to an Extension in the PBX
–  Transferring to an Outside Party Using the PBX Service
–  Transferring to an Outside Party Using the SIP Service
•
You can transfer a held call without talking, and go on-hook even if the transferred party
does not answer the call.
If a transferred call is not answered within a specified time, it will ring at a
preprogrammed extension, if set, or at your extension again. If you are off-hook at that
time, you will hear an alarm tone. If...

•
* Instead of going on-hook, if you press the HOLD button or TRANSFER button 
(KX-HGT100) once or twice (depending on the telephone being used), you can return
to the held call, and the call with the transferred party will be disconnected. •
For the transfer operation using an SDN button, refer to "1.3.50  PDN (Primary Directory
Number)/SDN (Secondary Directory Number) Extension".
To transfer with one touch (One-touch Transfer) Document Version  2013-05  
Operating Manual 43 1.3.11 Call...

•
System programming is required to use the One -touch Transfer feature during a
conversation with an extension.  Transferring to an Outside Party Using the PBX Service
Some extensions may be restricted from performing this feature. 44 Operating Manual
Document Version  2013-05  1.3.11 Call Transfer  On-hook. Talk.
Seize CO line.
During a conversation
PT/PS
Press TRANSFER. Dial outside 
phone number.
CO lineoutside
phone no.TRANSFER
C.Tone On-hook. Talk.
During a conversation
SLT
Press Recall/...

•
* Instead of going on-hook, if you press the HOLD button or TRANSFER button 
(KX-HGT100) once or twice (depending on the telephone being used), you can return
to the held call, and the call with the transferred party will be disconnected.
• Time limit
Both 
the caller and the transferred party will hear an alarm tone fifteen seconds before
a specified time period, and the call will be disconnected.
• To return to the held call before the destination answers , press the TRANSFER
button, corresponding...

To transfer a call without announcement (Blind Transfer)
•
The availability of this feature depends on your SIP service provider.
• You cannot return to the held call after dialing the destination
’s number.Customizing Your Phone
•
3.1.4  Customizing the Buttons
Create or edit a One-touch Dialing button, store the Blind Transfer feature number.
1.3.12  CALL WAITING FEATURES •  Call Waiting (BSS [Busy Station Signaling])
•  Answering Call Waiting in the PBX
•  Answering Call Waiting from the Telephone...

To send a call waiting
•
Depending  on the type of the other party’s telephone , you may be able to talk to the
other party using the speaker and the microphone (Off-hook Call Announcement
[OHCA]), or you can send a call announcement through the handset (Whisper OHCA),
if they are having another conversation using the handset. For more details on each
feature, refer to "1.3.13  Call Waiting Tone", "1.3.46  OHCA (Off-hook Call
Announcement)", or "1.3.77  Whisper OHCA".
• Depending...

2. To hold the current call and then talk to the new party
After talking to the new party (second call), you can disconnect 
(2.1) or hold (2.2) it and then retrieve
the first call.
2.1 To disconnect the second call and then talk to the original party 48 Operating Manual
Document Version  2013-05  1.3.12 CALL WAITING FEATURESPT/PS
Press HOLD.
While hearing a tone
Disregard this step if both
parties are extensions.
HOLD
Talk to the
new party.
OR(CO)
INTERCOM
OR
(ICD Group)
(SDN)
(PDN)
OR
OR
Press CO, ICD...

2.2 To hold the second call and then talk to the original party
After holding it, you can talk to the original party. Then, you can disconnect it and then talk to the new party
again.
Document Version  2013-05  
Operating Manual 49 1.3.12 CALL WAITING FEATURESPT/SLT/PS
During a conversation
Off-hook.On-hook.Talk to the 
original party.Enter     50.
05C.Tone PT/PS
Press HOLD.
During a conversation
Disregard this step if both 
parties are extensions.
HOLD
Talk to the
original party.
Off-hook.On-hook.Talk...

•
Depending  on the type of your telephone , you may be able to talk to the other party
using the speaker and the microphone (Off-hook Call Announcement [OHCA]), or you
can receive an announcement through the handset (Whisper OHCA), if you are having
a conversation using the handset. For more details on each feature, refer to "1.3.13  Call
Waiting Tone", "1.3.46  OHCA (Off-hook Call Announcement)", or "1.3.77  Whisper
OHCA".
• The caller’s name or number is displayed for five...