Panasonic Kx Ncp500/1000, Kx Tde100/200, Kx Tde600 Operating Manual

3.1.4  Customizing the Buttons
You can customize the flexible buttons and/or programmable feature  (PF) buttons on PTs, Add-on Key
Modules, and PSs. They can then be used to make or receive outside calls or as feature buttons. •
To enter the programming mode when using a PS, refer to 
 "Operating Instructions" for the
PS.
• The buttons in the table below can only be set on certain flexible buttons, as follows:
–Flexible buttons on PTs/Add-on Key Modules/PSs: all buttons can be set.
– Flexible...

Button
Programming Input
Group FWD—Outside calls    + Incoming call distribution group extension no.
Group FWD—Intercom calls    + Incoming call distribution group extension no.
Account  
Conference  
Terminate  
External Feature Access (EFA)  
Call Park    + Parking zone no. (2 digits)
Call Park (Automatic  Park Zone)    
Call Log
*4  
Call Log for ICD Group
*4    + Incoming call distribution group extension no.
Log-in/Log-out  
Log-in/Log-out of a specified
group
   + Incoming call distribution group...

Button
Programming Input
CTI  
Primary Directory Number 
(PDN)
 
Secondary Directory Number 
(SDN)
   + Extension no. +   + delayed ringing time (0–7)
*7
Check-in *4  
Check-out
*4  
Cleaned-up
*4  
Two-way Record
*8    + Voice mail floating extension no.
*9
Two-way Transfer *8    + Voice mail floating extension no.
*9
One-touch Two-way Transfer *8    + Voice mail floating extension no.
*9
  +   + Extension
no./Incoming call distribution group extension no.
Live Call Screening (LCS) *8  
Voice Mail...

•
*1
 " ", "#", FLASH/RECALL, PAUSE, Secret (INTERCOM) and TRANSFER can also be
stored.
If you do not want to display the stored number when making a call, press the Secret 
(INTERCOM) button before and after the numbers you wish to conceal.
If you store an outside party’s number, you should first store a line access number.
If you need to enter an account code, you can enter the specified account code before the
line access number.
 •
*2
 For a PF button, "2" is not required to...

 Document Version  2013-05  
Operating Manual 195 3.1.4 Customizing the ButtonsPress(CO)
Enter the programming input (          ),
and desired phone number.2
Press          in front of the number you
want to keep secret.
INTERCOM
Press          again after entering the number
you want to keep secret.
INTERCOM
Press               to store.
Press          or           or
PROGRAMPAUSEPROG
OCT.27   03:13PM   THU
    
 PROG   INFO   RING   MENU
     Program No?->              EXIT   CONT   NEXT
    Single...

To distinguish the ringing tones for each CO, ICD Group, PDN, SDN, or INTERCOM button
(Digital proprietary telephone only)
•
* Available tone types vary depending on the telephone you are using:
–KX-NT500/KX-NT400/KX-NT300
 series (except KX-NT321)/KX-NT136/KX-DT300
series (except KX-DT321)/KX-T7600 series: Tone types "01" to "30" (01–20: tone, 21–
30: melody) are available.
– KX-NT265/KX-NT321/KX-DT321: Only tone types "01" to "08" are available.
It is possible to enter a...

3.2  Manager Programming
3.2.1  Programming Information
The manager can program the following item.
•Other Extensions Control
Available Extension
The extension assigned as a manager
Required Telephone
A Panasonic Proprietary Telephone with display 
(over 2 lines)
(e.g., KX-NT343, KX-DT346, KX-T7636)
Manager Password
To enter programming mode, the manager password (max. 10 digits) is required. (Default: 1234) CAUTION
•The PBX has a default password preset. For security, change the password the first time...

Item
Programming Input
Locking/unlocking other extensions.
(Remote Extension Dial Lock)    +   + Extension no. +   (to lock)/
 (to unlock) + 
Clearing the PIN and PIN lock for
extensions.
   +   + Extension no. + 
Clearing the PIN and PIN lock for
verification codes.
   +   + Verification code + 
Setting the verification code PIN.    +   + Verification code + PIN (max. 
10 digits)
+  CAUTION
There is a risk that fraudulent telephone calls will be made if a third party discovers your
password...

Document Version  2013-05  
Operating Manual 199 3.2.2 Manager ProgrammingEnter the current manager  password.The current manager password appears.
Enter a new manager password
(max. 10 digits). Enter
1
Enter the programming input
(                      ).
00
     Program No?->              EXIT   CONT   NEXT
      Enter Password              EXIT         ENTER
               1117
SHIFT   ->    CLEAR  NEXT
               1234
SHIFT   ->    CLEAR  NEXT
      Manager Password
SHIFT  EXIT   ENTER  NEXT...

3.3  System Programming
3.3.1  Programming Information
You can customize your system according to your requirements.
[Your system already has default settings (factory installed).]
The programming is shown below. 
(Program number)
• The date and time [000]
• System speed dialing numbers and names [001]/[002]
• Extension number and name [003]/[004]
Available Extension
The extension allowed through COS programming
Required Telephone
A Panasonic Proprietary Telephone with display (over 2 lines)
(e.g.,...