Panasonic Digital Imaging System For Facsimile And Internet Fax Email Functions Dp 8060 Operating Instructions

							21
FacsimileFeatures
Print Co m m. Journal?
4
Print Communication Journal.
(COMM. JOURNAL) T
ransmission stops.
5 
						

							22
Facsimile Features
■ 2-Sided Transmission
Letter or A4 Original(s) are placed in a Portrait () direction, the document(s) will be rotated by 90° and then transmitted in
a Landscape (
) direction. The document(s) will be printed the same size as the transmitted originals at the Receiving
Station.
Rotation XMT Fax Parameter No. 078 (Rotation XMT) set to:
• Invalid
Letter or A4 Original
(Portrait)SendsReceiving Station:
Prints on Letter or A4 Size
(70% Reduction)
This machine has duplex SCAN & PRINT capabilities.
2-Sided Original on the Basic Menu:
• 2-Sided Original = ON
Duplex ScanReceiving Station
NOTE1. Rotation XMT requires the use of Memory Transmission.
2. Verification Stamp is disabled during Duplex Scan. Scanning Direction
Prints on A3 or Ledger
Size (100%)
Sending Documents
■ Rotated Transmission 
						

							23
FacsimileFeatures
• Valid  (Default Position)
Sends with Rotated
Transmission Receiving Station:
Letter or A4 Paper
Scanning Direction
Scanning Direction
A4/Letter
A4/Letter
Set as Portrait
Set as Landscape 
						

							24
Facsimile Features
NOTE1. If you need a special access number to get an outside line, dial it firs\
t then press Pause key to enter a
pause (represented by a -) before dialling the full number.
Ex: 9 PAUSE 5551234
2. If you are using Pulse dialling and you wish to change to Tone dialling in the middle of dialling, press 
key (represented by a /).
The dialling mode will change from Pulse to Tone after dialling the digit /.
Ex: 9 PAUSE * 5551234
Sending Documents
■ On-Hook Dialling
1
or
3
You will hear a dial tone
through the monitor speaker.
To  adjust the Monitor
volume, see page 160.
(1 page only)
2 
						

							25
FacsimileFeatures54
T elephone number
 • Transmission
starts immediately
on scanning. 
						

							26
Facsimile Features
■ Automatic Reception
■ Manual Reception
Machine receives documents automatically.
Receive Transmit
You may wish to receive documents manually if you use the telephone line in your office primarily as a personal telephone, and
occasionally for your facsimile machine.
Transmit
ReceiveTo receive documents manually, change the
Fax Parameter No. 017 (Receive Mode) to
Manual.
(See page 168)
1234
Rings Lift the handset Remove any documents
from the ADF or Platen
Glass.
NOTE1. If the received document is extremely long (over 39% longer
than the recording paper), the document is divided into
separate pages.
Overlap print
0.5 in (13 mm)
Receiving Documents
  • Machine
will start
receiving. 
						

							27
Facsimile
Features
■ Print Reduction Setting
■ Substitute Memory Reception
Transmitted Document Received Document
Oversized documentsReduce within paper
size
If the recording paper runs out,
jams, or if the toner runs out
during reception, the machine
automatically starts receiving
documents into its image data
memory. Stored documents are
printed automatically after
replenishing the recording
paper, or toner.
(See notes 2 and 3)
NOTE2. If the memory overflows, the machine will stop receiving, and release the communication line.
The document(s) stored in the memory up to that moment will print.
3. If you wish to turn off the substitute reception function, change the setting of Fax Parameter No. 022
(Substitute RCV) to Invalid. (See page 169)Automatic Reduction
Based on the document length, your machine will automatically
calculate the suitable reduction ratio  (70% to 100%).
Set Parameter No. 024 (Print Reduction) to Auto. (See page
169)
Fixed Reduction
Pre-determine the reduction ratio from 70% to 100% in 1% steps.
a) Set Parameter No. 024 (Print Reduction) to Fixed.
b) Set Parameter No. 025 (Reduction Ratio). (See page 169)
Ex:A4 to A4 96%
A4 to Letter 90%
Letter to Letter 96%
Legal to Letter 75%
AFRICAMessage In Memory
1
When the machine completes the
memory reception, and there is no
recording paper or toner, an
message will appear on the display.Replenish the recording paper, or
the toner.
The machine will automatically
start printing the document(s)
stored in memory.
2
Sending Station
(Letter or A4 Originals)Duplex Print Duplex Print Fax Parameter No. 095 (Duplex Print) set to:
• Duplex Print = Valid (Default Position is Invalid)
■ Duplex Print 
						

							28
Facsimile Features
■ General Description
Timer Controlled Communications
You can send document(s) to one, or multiple stations at any preset tim\
e within the next 24 hours.
Up to 50 built-in timers can be set for deferred communication.
■  Deferred Transmission
Receive
Store document(s)
in memory
1
(To use the Platen Glass,
see page 17.)
or
2
5
Start time
(4-digit, 24-hour clock)
2T ransmit
1Calling at
predetermined
time
NOTETo  change or cancel the Deferred Communication settings, see pages 120, 12\
2. 
						

							29
Facsimile
Features
BERLIN ANTARTICA
34
7
 • To cancel a choice, select the same destination again.
 • For transmission to additional destinations, continue
pressing the relevant keys.
 • Select “DESTINATIONS” to confirm your designated
destinations. (See page 62)Document(s) are stored into memory.
 •A communication journal is printed if the transmission
fails for any reason. (Ex: Remote station was busy)
(See page 176)
 • Press Stop key to return the machine to the initial
screen of the current active mode.
Telephone
number
(Up to 70
stations)
AFRICA
ASIA AMERICA ANTARTICA
APOLLO BERLIN
BRAZIL
6
Address
(Up to 1,000 stations)
and/or
5 
						

							30
Facsimile Features
■ Deferred Polling
1
BERLIN
ANTARTICA
2
5
Polling password
(4-digit)
_
2
Receive
1Calling at
predetermined
time
Store document(s)
in memory
Timer Controlled Communications
NOTETo  change or cancel the Deferred Communication settings, see pages 120, 12\
2.
 • For instruction on how to use polling without a pre-
programmed time, see page 36.
 • If you have set the polling password in Faxparameter No. 026 ( Polling Password), the
password will appear on the display. You can
still change the password temporarily by
overwriting it with a new one.
Sender Receiver