Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Figure 4-3. Call log format for the small-display phone--time and dateSecond Level
of 
Call Log
Information
10 : 3 0 WED JUNE 22 4 Time, day and date
El 4 Calling nu#nberPressing the CONF key again displays the next level of information.
Figure 4-4. Call log format for small-display phone--answer informationThird Level
of Call Log
Information
Pressing the CONF key again displays this information.
Figure 4-5. Call log formatfor small-display...

Section 700 - OperationChapter 4. Key Telephone Features
L.og Format for the Large-Display Phone.Large-display phone users can view 
all four levels of the Call Log on one
screen.For example, when the large-display phone user presses the Call Log Key,
the following display appears:
Figure 4-6. Call log formatfor the large-display phone-calling number
404-555-COO1+Number of last entry vlewed through
top displz)
ABC COMPANY- Name of last entry viewed through
404-555-0001
404-555-8888404-555-9999...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
viewing detailed information, the detailed information is displayed for the
newly selected log entry.
Exit the Call Log display by pressing the ON/OFF key.
Considerations
lCaller ID feature must be installed and enabled. (See “Caller ID” on page
2-14 for more information.)
lTo have Caller ID Call log indications, an FF key must be assigned as a
Call Log Indication Key 
(“6).
Camp-on
(All Versions)Description
If you reach a busy extension the...

Section 700 - OperationChapter 4. Key Telephone Features
To answer the callback ring:
1.Pick up the handset when you hear the callback ring.
l “Camp-on Call” appears on the display.
l The EXT LED flashes.
l The system automatically dials the called extension.
Related Programming
.FF3 (Extension): Call Waiting/OHVA
Considerations
.
.
.
.The callback ring must be answered within sixteen seconds or it will be
canceled.A Camp-on request will only be accepted 
after Call Waiting status.
An extension can only...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
2. Dial the telephone number.
The dialed number appears on the display.
3.Complete the call and replace the handset.
l The line LED changes from green to red and then goes off.
l The time and date reappears on the display.
Related Programmingl
FFl (System): SMDR Display Start ‘limer for CO Calls
lFF5 (FF Keys): FF Key Assignments for Extensions
ConsiderationslThe duration of a call appears on the display while the call is in progress (if
enabled in...

Section 700 - OperationChapter 4. Key Telephone Features
l Three extensions
l Four extensions.
Operation
To establish a Conference Call:
1.Press HOLD or the line key of your current call to place it on hold.
The extension number, outside line number, or name of the party on hold
appears on the display.
2.Press any unlit line key or dial the number of the extension you wish to
add to the call.l The line LED lights green.
l The phone issues outside dial tone.
l “CO TALK #XX” (where “XX” is the line number)...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
To establish an Unsupervised Conference Call:
1.Press HOLD or the line key of your current call to place it on hold.
The outside line number or name of the party on hold appears on the
display.
2.Press an unlit line key .
l The line LED lights green.
l The phone issues outside dial tone.
l “CO TALK 
#XX” (where “XX” is the line number) appears on the
display.
3.Dial the number of the party you wish to add to the call.
The number appears on the...

Section 700 - OperationChapter 4. Key Telephone Features
Delayed Ringing
(CPC-AlI and CPC 2.0 and higher)
DescriptionDelayed ringing causes a call that is unanswered at a primary extension to
ring at a secondary extension.
CO delayed ringing causes an incoming outside call to ring at a designated
extension or extensions if it is not answered within a certain period of time.
CO delayed ringing is also available for hunt group pilot numbers.
Extension delayed ringing causes any type of call, outside or...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
With CPC-A and CPC-B Version 1 .O, a maximum of two attendants can be
assigned. Beginning with CPC-B Version 2.0, up to four attendants can be
assigned.
Operation
1.Pick up the handset or press ON/OFF.The phone issues intercom dial tone.
2. Press 
“0.”l “Talk-EXT 100” appears on the display if your extension is set for
Voice Calling.l “Call-EXT XXX” (where “XXX” is the extension) appears on the
display if your extension is set for Tone Calling....

Section 700 - OperationChapter 4. Key Telephone Features
Dial Tone Disable
(All Versions)Description
The intercom dial tone can be turned off at a phone. Dial tone is turned off
when a headset is used.
Operation
To disable the intercom dial tone:
1.Press the ON/OFF key.
l The phone issues intercom dial tone.
l The ON/OFF 
LED lights.
2. Press 
‘MO.”
3.Press the ON/OFF key.
. The ON/OFF LED goes off.
To reactivate dial tone:Repeat the preceding steps.
-..mDBSManuai - ISSued 8/l/95___4-43