Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Related Programming
lFF2 (Trunks): Private Trunk Line
l
FFl (System): Least Cost Routing (LCR) Access
lFF2 (Trunks): Pooled Trunk Access for Group 
“9”lFF2 (Trunks): Pooled Trunk Access for Groups “8 l-86”
lFF3 (Extension): Forced Least Cost Routing
l 
FFS (Keys): FF Key Assignment
Considerations
lCalls to Private Lines cause extensions to ring even if the DND or the
Absence Message feature is activated for them.
lCalls to Private Lines are not...

Section 700 - OperationChapter 4. Key Telephone Features
l The ON/OFF LED lights.
2. Press 
‘Y/4.”“Enter Time HHMM” appears on the display.
3.Enter the time you wish the Reminder Call to sound. Enter the desired
time in 
1Zhour format, followed by a “1” for a.m. or a “2” for p.m.
4.Press the ON/OFF key.l The ON/OFF LED goes off.
l “Alarm 
xX:xX” (where “XX:XX” is the time) appears on the display,
along with an a.m./p.m. indicator.
To cancel the Reminder Call feature:
1.Press the ON/OFF key.l The phone...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Ringing Line Preference(All Versions)
DescriptionRinging Line Preference enables an extension to answer an incoming CO call,
hold recall, or transfer call by simply picking up the handset or pressing
ON/OFF.
Related Programming
lFF3 (Extensions): Auto Pickup (Ringing Line Pickup)
Saved Number Redial(All Versions)
DescriptionYou can save a previously dialed number for later redialing. Unlike the Last
Number Redial feature, the Saved Number Redial...

Section 700 - OperationChapter 4. Key Telephone Featuresl The line LED lights green.
. “CO TALK ##XX” (where “XX” is the line) appears on the display.
2.Press the AUTO key.
3. Press 
“*.”The dialed number appears on the display.
4.Complete the call and replace the handset.
The line LED changes from green to red and then goes off.
ConsiderationslAny previously saved number is erased when a new number is saved.
lThe Saved Number 
Redial feature can store a number up to sixteen digits
long.lUp to five Speed...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Operation
To assign Personal Speed Dialing:1. Press ON/OFF.
2. Press PROG.
3.Press a One-Touch key or press AUTO followed by the personal speed
dial bin number (90-99 or 900-909).
4.If you want to include a trunk access code in the number, press CONF
then 9 or 1-6. (l-6 = trunk groups 8 l-86.)
If you enter a trunk access code in the speed dial number, you do not have
to open a trunk before using the number.
5. Dial the number.
6. Press HOLD.
7....

Section 700 - OperationChapter 4. Key Telephone Features
2. Press the CONF key.
“C’ appears on the display.
3.Press a Personal Speed Dial key.
The programmed data appears on the display.
4.Press the ON/OFF key.
The ON/OFF LED goes off.
To assign a name to a Personal Speed Dial number:
1.Press the ON/OFF key.
l The phone issues intercom dial tone.
l The ON/OFF LED lights.
2.Press the PROG key.3. Press 
“#Il.”
“Speed Dial Name” appears on the display.
4. Press the AUTO key.
5.Enter the Personal Speed Dial...

Chapter 4. Key Telephone FeaturesSection 700 - Operation5. Press ON/OFF again.
Related Programming
lFFlO (Speed Dialing): Personal Speed Dial Numbers
lFF3 (Extensions): PSD Name Display (5 or 10 Names)
l FF6 (Name): PSD Names
Considerations
lPersonal Speed Dial numbers can contain up to sixteen characters,
including the 
“*,” “#,” “-“,FLASH, PAUSE (REDIAL), CONF, and
AUTO keys.
lA dash (,‘-“) can be displayed in the Personal Speed Dialing number. To
display a dash. press the FF6 key where you want the...

Section 700 - Operation
System Speed DialChapter 4. Key Telephone Features
Description
Frequently called numbers can be stored using the System Speed Dial feature.
System Speed Dial numbers are programmed from the Attendant Phone and
can be used by any extension. With all versions, up to 90 System Speed Dial
Numbers can be stored. Beginning with 
CPC-AI1 and CPC-B Version 7.0 and
higher, up to 200 System Speed Dial numbers can be stored when the Speed
Dial Add-on mode is selected.
For information on...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
2.Press the CONF key.
“C” appears in the display.
3. Press AUTO.
4.Press a System Speed Dial key.
Tne programmed data appears on the display.
5.Press the ON/OFF key.
l The ON/OFF LED goes off.l The date and time appear on the display.
Related Programming
l
FFl (System): Speed Dial Mode Setting (CPC-AI1 and CPC-B Version 7.0
and higher)l
FFI (System): Override Toll Restriction With SSD Numbers
l
FFIO (Speed Dialing): System Speed Dialing...

Section 700 - Operation
Speed Dial LinkingChapter 4. Key Telephone Features
Description
You can automatically link together up to five SSD numbers in one Personal
Speed Dial Bin to handle telephone numbers longer than 16 characters.
Pressing the one Personal Speed Dial Key dials the entire number.
Alternatively, any combination of Personal Speed Dials and System Speed
Dials can be manually linked together by pressing the keys in the desired
sequence. This can be useful for prepending account codes or...