Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 5. DSLT FeaturesSection 700 - Operation
3.Replace the handset or press ON/OFF.
Considerations
lA sixteen-second alarm tone will be issued at the specified time.
lOne Reminder Call may be set for each telephone.
lTo change the Reminder Call, enter a new time.
lIf the extension is in use when the reminder call is scheduled, the reminder
call is sent as soon as the extension becomes available.
Saved Number Redial
(All Versions)Description
You can save a previously dialed number for later redialing....

Section 700 - OperationChapter 5. DSLT Features
Considerations
lAny previously saved number is erased when a new number is saved.
lThe Saved Number Redial feature can redial a number up to sixteen digits
long.lA maximum of five chained Speed Dialing codes can be stored.
Speed Dialing
(All Versions)
Personal Speed Dialing
DescriptionExtension users can store frequently called numbers using the Personal Speed
Dial feature. Up to 10 Personal Speed Dial numbers can be stored at each
extension.
With all...

Chapter 5. DSLT FeaturesSection 700 - Operationl To include a pause, press REDIAL.
l To include a flash, press FLASH.
6. Press HOLD.
7.Replace the handset or press ON/OFF.
To delete a Personal Speed Dial number:
1.Lift the handset or press ON/OFF.2. Press 
*.3. Dial “80.”
4.Dial the personal speed dial number (90-99 or 900-909).’5. Press HOLD.
6.Replace the handset or press ON/OFF.
7.To dial a Personal Speed Dial number:
To dial a Personal Speed Dial number:
1.Lift the handset or press ON/OFF.
2.If...

Section 700 - OperationChapter 5. DSLT Features
lSpeed Dialing cannot be checked while Station Lockout is enabled.
lIf the Speed Dial is used to forward to an outside number and Least Cost
Routing is enabled, the Speed Dial cannot use Trunk Group “9.”
System Speed Dial
Description
Frequently called numbers can be stored using the System Speed Dial feature.Up to 90 System Speed Dial numbers can be programmed at the Attendant
Phone and used by any extension. With 
CPC-AII/CPC-B Version 7.0 and
higher, up...

Section 700 - OperationChapter 5. DSLT Features
To activate Station Lockout:
1.Press the ON/OFF key.l The phone issues intercom dial tone.
2. Dial “74.”
3.Dial the Station Lockout code.
4.Press the ON/OFF key.
To deactivate Station Lockout:
1.Press the ON/OFF key.l The phone issues intercom dial tone.
2. Dial “74.”
3.Dial the Station Lockout code.
4.Press the ON/OFF key.
Related Programmingl FF3 (Extensions): Extension Lockout Code
Considerations
lA locked extension can be used for Intercom Calls....

Chapter 6. SLT FeaturesThis chapter describes features that are available with single-line telephones
(SLTsJ.Single-line telephones are industry-standard 
2500 sets. SLTs are not equipped
with feature keys or 
line keys, so basic telephone operations are performed bypressing 
dialpad keys and/or using the switchhook.
This chapter covers the following topics:
Absence Message
TopicPage6-3 
I
’ Busy Override
Cal i Forwarding
Call Hold
I6-j (,6-6 
i
6-10Call Park
Call Pickup
Cali Transfer
Call Waiting...

6-2DBS Manual - Issued 8/l/95.-  

Section 700 - OperationChapter 6. SLT Features
Absence Message
(All Versions)
DescriptionSLT users can leave text messages on their phones when they are away.
When the unattended extension is dialed by a key phone, the text message
appears on the caller’s phone.
One of the following messages can be selected. Messages 5 to 9 can be
changed through system programming.
Table 6-I. Absence Messages
Message
No.Message Text
I 21 Out of Office1
I 5I User Defined II 
61. User Defined II 7
1 User Defined 1I
8I...

Chapter 6. SLT FeaturesSection 700 - Operation
To Cancel an Absence Message
1. Lift the handset.
2. Dial “7 
1.”3. Replace the handset.
Related ProgramminglFFI (System): Extension Class of Service Setting (CPC-AII and CPC-B
Version 3.1 or higher)lFF3 (Extension): Extension Class of Service Assignment 
(CPC-AI1 and
CPC-B Version 3.1 or higher)lFF6 (Names and Messages): Absence Messages
ConsiderationslExtensions without displays get a busy signal, rather than the Absence
Message.l
If a message code number...

Section 700 - OperationChapter 6. SLT Features
calls are routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls follow permanent call forward
settings:
- Direct trunk calls (including DID/DNIS)
- Transferred trunk calls.
lWhen an Absence Message is set on a DID extension, incoming DID calls
are routed according to the ringing assignment programmed for the
incoming trunk.Busy Override
(All Versions)Description
Extensions in the same Paging Group (1-7) can...