Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 6. SLT FeaturesSection 700 - ODeration
The phone issues intercom dial tone.
2.Dial the extension number to which the call is to be transferred.
3.When your call is answered, inform the third party of the transfer.
4. Replace the handset.
The third party need only pick up the handset to speak to the outside line.
To use Screened Transfer when Onhook Transfer is disabled:
1.Flash the switchhook to place the outside call on hold.
The phone issues intercom dial tone.
2.Dial the extension number to...

Section 700 - OperationChapter 6. SLT Features
lWhen you transfer a call to an extension that is busy or does not answer
and does not have Call Forwarding activated, a recall tone sounds at your
extension after Transfer Recall Timer expires.
Call Waiting
(All Versions)
DescriptionYou can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your...

Chapter 6. SLT FeaturesSection 700 - Operation
5.Remain on the line until the called party picks up.
To answer Call Waiting (and disconnect the current call):
1. Replace the handset.
The current call is disconnected.
2.Pick up the handset.
You are automatically be connected to the extension sending the Call
Waiting.
To answer Call Waiting (without disconnecting the current call):
1. Flash the switchhook.
l The current call is disconnected.
l The new call is connected automatically.
2.Flash the switchhook...

Section 700 - Operation
Camp-on
(CPC-A 3.1 or higher, CPC-AII, and all Versions of CPC-B)
Chapter 6. SLT Features
Description
If you reach a busy extension, you can use the Camp-on feature to alert you
with a ring when the extension becomes free. You can then pick up your
handset to automatically dial the extension.
Operation
To activate the Camp-on feature:
1. Lift the handset.
2.Dial the desired extension number.
3.Upon hearing busy tone, press “3.”
l The phone issues ringback tone.
+If the Camp-on...

Chapter 6. SLT FeaturesSection 700 - Operation
lA Camp-on request will only be accepted afer Call Waiting status.
lYou cannot camp-on to an extension that has call forwarding activated.
*An extension can only have one call camped on at a time. For example, if
Extension 152 camps on to Extension 153, another extension cannot camp
on to 153, as long as 152 is camped on.l
An extension that has initiated a camp-on cannot receive a camp-on. For
instance, if Extension 200 has camped on to Extension 300,...

Section 700 - OperationChapter 6. SLT Features
To add an outside number (CPC-All and CPC-B Version 3.1 or
higher):
1.Flash the switchhook to place the current call on hold.
2.Dial a trunk group number (8 l-86 or 9).
3.Dial the outside number.
4.Flash the switchhook when your call is answered.
Related Programming
lFF3 (Extension): Single Line Telephone Hookflash (Brokers Hold/
Conference)
Considerations
lCall Waiting tone can be received during conference calls. however. you
cannot respond to call waiting...

Chapter 6. SLT FeaturesSection 700 - Operation2. Press “0.”
Related Programmingl 
FFl (System): Second Attendant Position
l 
FFl (System): Third Attendant Position
l 
FFl (System): Fourth Attendant Position
l 
FFI (System): Attendant Transfer Extension
Dial Tone Disable
(All Versions)
DescriptionThe intercom dial tone can be turned off at an attendant phone. Dial tone is
turned off when a headset is used.
Operation
To disable the intercom dial tone:1. Lift the handset
l The phone issues intercom dial...

Section 700 - OperationChapter 6. SLT Features
Direct Trunk Access
(All Versions)
DescriptionExtensions can access a specific trunk for outgoing calls. Extensions can also
use Direct Trunk Access to test trunks or to access data trunks.
Operation1. Lift the handset.
2.Dial “88” followed by the desired trunk number (01-64).
3. Dial the outside number.
4. Replace the handset.
Do-Not-Disturb (DND)
(All Versions)
Des&p tion
An extension can be made unavailable by activating Do-Not-Disturb (DND).
When DND is...

Chapter 6. SLT FeaturesSection 700 - OperationTo cancel DND:
1. Lift the handset.2. Dial “73.”
3. Replace the handset.
Related Programming
lFFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 4.0 or higher)l
FF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 4.0 or higher)
Considerations
lIn CPC-A and CPC-B Versions prior to 5.0, DND and Absence Messages
cancel Call Forwarding.
Beginning with Version 5.0, calls to an extension with DND or Absence...

Section 700 - OperationChapter 6. SLT Features
IntGrcom Calling
(All Versions)
Descriptions
The DBS provides two methods of intercom calling: voice calling and tone
calling.
Voice Calling. With voice calling, intercom calls are connected
immediately, without a ringing tone.
Tone Calling. With tone calls, a ringing tone is sent to the called extensidn.
System programming determines whether the DBS uses voice or tone calling
as a default. If voice calling is the default, dialing a “1” after the extension...