Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 6. SLT FeaturesSection 700 - Operation
lFF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 4.0 or higher)
Considerationsl
When an extension’s calling mode is set for voice calls, a “splash” tone canbe sent to alert the extension to the voice call. System programming
determines if the splash tone is provided.
lIf an extension is onhook, it will receive tone calls.
lThe voice calling feature is not available for DISA incoming calls.
lVoice calls do not forward if...

Section 700 - OperationChapter 6. SLT Features
Meet-Me Answer
(All Versions)
Description
You can answer a Paging call from any extension using the Meet-Me Answer
feature.
Operation
1.Pick up the handset from any extension at which you hear the Paging call.2. Press “77.”
Paging ceases and you are connected to the party trying to reach you.
Related Programmingl
FFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 4.0 or higher)l
FF3 (Extension): Extension Class of Service Assignment...

Chapter 6. SLT FeaturesSection 700 - Operation
Message Waiting/Callback Request
(All Versions)
Description
If you try to call an extension that is busy or does not answer, you can leave a
message requesting a return call.
Operation
To leave a Message Waiting/Callback Request:
1. Lift the handset.
2.Dial the extension number.
3.Dial “2” at the busy tone or while the telephone is still ringing.
4. Replace the handset.
To answer a Message Waiting/Callback Request (CPC Ail and CPC-
B only):
1. Pickup the...

Section 700 - OperationChapter 6. SLT Features
Related Programmingl
FFl (System) Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 3.1 or higher)
lFF3 (Extension) Extension Class of Service Assignment (CPC-AI! and
CPC-B Version 3.1 or higher)
Considerations
lWith CPC-A, SLTs cannot receive callback requests.
lUp to four Message Waiting/Callback Requests can be sent to any one
extension.lIf a Callback Request is sent to an extension for which 
Cal! Forwarding is
set, the Callback Request is...

Chapter 6. SLT FeaturesSection 700 - Operation
2.Dial the desired extension number.
3.Upon hearing busy tone, press “5.”
Related Programmingl
FFl (System): Alert Tone for Busy Override & OHVA
l
FFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
3.1 or higher)lFF3 (Extension): Extension Class of Service Assignment 
(CPC-AI1 and
CPC-B 3.1 or higher)
lFF3 (Extension): Call Waiting/OHVA (Enable)
ConsiderationslIf 
Onhook Transfer is enabled, the held call is transferred as soon as the...

Section 700 - OperationChapter 6. SLT Features
The phone issues intercom dial tone.
2.Dial the desired trunk group number (8 l-86 or 9).
3.Dial the outside number.
Related Programming
lFFl (System): Least Cost Routing (LCR) Access
lFF2 (Trunks): Pooled Trunk Access for Group “9”
lFF2 (Trunks): Pooled Trunk Access for Group “8 l-86”l
FF3 (Extension): Forced Least Cost Routing
l FFS (LCR) LCR Settings (all)
Considerations
lThere are seven groups of outside lines: 9 and 8 l-86.
lDialing “9” activates LCR if...

Chapter 6. SLT FeaturesSection 700 - Operation
Operation
To program a Personal Speed Dial
1.Pick up the handset
2. Dial *t!so.
3.Dial the Personal Speed Dial number (90-99 or 900909)).
4.Dial * followed by the trunk access number (9, 1-6 for trunk access 89,
8 l-86).
5.Dial the telephone number.6. Hang up.
To dial a Personal Speed Dial number:
1.Pick up the handset.
2.If necessary, access an outside line.
3. Dial “80.”
4.Dial the Personal Speed Dial number(90-99 or 900-909).
System Speed Dial...

Section 700 - OperationChapter 6. SLT Features
3. Dial “80.”
4.Dial the system speed dial code (00-89 or 000-199).
Related Programming
lFFl (System): Override Toll Restriction with SSD Numbers
l 
FFlO (Speed Dialing): System Speed Numbers
Station Lockout
(All Versions)
Des&p tionUse the Station Lockout feature to dial a Station Lockout code that prevents
other users from using your phone.
To activate Station Lockout:1. Lift the handset.
. l The phone issues intercom dial tone.
2. Did “74.”
3.Dial the...

Section 700 - OperationChapter 6. SLT Featuresl FF3 (Extensions): Extension Lockout Code
Considerations
lA locked extension can be used for intercom Calls.
lStation Lockout key codes can only be set from an attendant phone or a
key phone.
lYou cannot confirm Speed Dialing or set Speed Dialing while Station
Lockout is activated.
lIf you enter an incorrect key code and then try to dial, the phone will issue
a busy tone.
l
If station lockout is set, when ON/OFF is pressed, stutter dial tone is heardfollowed...

AAbsence message
attendant control 3-7
DSLT 5-4
key telephone 4-3
$LT 6-3
Account codes
non-verified 2-3
verified 2-4
Alarm
DSLT 5-33
key telephone 4-84
Alternate attendant 3-3
Answer supervision for voice mail 2-6
Attendant Features
Voice Mail Transfer Key 4-97
Attendant features 3- 1
absence message control 3-7
alternate attendant 3-3
assignment of speed dialing 3-3
busy override 3-4
cs;ll park 3-5
dial “0” for attendant 4-41,5-23,6-21
dial tone disable 
3-12,4-43,5-24,6-22
DND control 3-7
DSW2 3-13...