Panasonic Cpc+AII/B Digital Business System Release Notes Manual

ChaDter 5. DSLT FeaturesSection 700 - Operation
Call Pickup
(All Versions)
DSLTs can use both directed and group call pickup.
Direct Call Pickup
DescriptionA call to an extension can be answered from any other extension with the
Direct Call Pickup feature.
Operation1. Lift the handset.
2. Dial “79.”
3.Enter the number of the ringing extension.
Related Prdgramminbl
FFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
3.1 or higher)
lFF3 (Extension): Extension Class of Service Assignment...

Section 700 - Operation
Group Call PickupChapter 5. DSLT Features
Description
OperationUse the Group Call Pickup feature, to answer calls to other extensions within
your Paging Group (01-07) without entering the number of the extension that
is ringing.1. Lift the handset.
2. Dial “70.”
Related Programming
lFFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 3.1 or higher)
lFF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 3.1 or higher)
lFF3...

Chapter 5. DSLT FeaturesCall TransferSection 700 
- Operation
(All Versions)The DBS provides two call transfer methods: blind transfer and screened
transfer.
Blind Transfer
DescriptionBlind transfer allows the transfer of a call directly to an extension, without
waiting for the called extension to answer.
Operation
t
1.Press the HOLD key to place the call on hold.
2.Dial the extension number to which the call is to be transferred.
3.Replace the handset before the other party answers.
l You can also...

Section 700 - OperationChapter 5. DSLT Features
For example, if extension “A” is forwarded to extension “B,” calls that are
transferred to extension “A” w-ill be forwarded to extension “B.”
lWhen you transfer a call to an extension that does not answer and does not
have Call Forwarding activated, the transfer recalls your extension after
the Transfer Recall Timer expires.
Screened Transfer
DescriptionUse the Screened Transfer feature to contact a third party and announce the
call before transferring it....

Chapter 5. DSLT FeaturesSection 700 - Operation
Related Programming
l 
FFI (System): Onhook (Automatic) Transfer
l
FFl (System): Recall Tier for Extension -Transferred CO Calls
.
FFl (System): Recall Timer for Extension -Transferred CO Calls
Considerations
lYou cannot transfer a call to an extension that has Do Not Disturb or
Absence Message activated.
lYou can transfer a call to an extension that has Call Forwarding activated.
The transferred call will follow the call forwarding path of the extension...

Section 700 - OperationChapter 5. DSLT Features
Call Waiting(All Versions)
Description
You can send a Call Waiting signal, followed by a brief LCD message, to a
busy extension. The party receiving the message need only replace the
handset and then pick it up again to be automatically connected to your
extension.
The following messages can be sent using the Call Waiting feature:
Table 5-4.Call Waiting Text Messages
Message
Code
5
Message
“Visitor Here”
1 61 “Need Help”II 7I 
“Imoortant”I
9“Emergency”...

Chapter 5. DSLT FeaturesSection 700 - Operation
The current call is disconnected.
2. Pick up the handset.
You are automatically connected to the extension sending the Call
Waiting.
To answer Call Waiting (without disconnecting the current call):1. 3ress HOLD.
l The current call is disconnected.
l The new call is connected automatically.
2.Press HOLD again to retrieve the first call.
Related Programming
l
FFl (System) Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 3.1 or higher)lFF3...

Section 700 - OperationChapter 5. DSLT Features
Camp-on
(All Versions)
DescriptionIf you reach a busy extension, you can use the Camp-on feature to alert you
with a ring when the extension becomes free. You can then to pick up your
handset to automatically dial the extension.
Operation
To activate the Camp-on feature:1. Lift the handset.
2.Dial the desired extension number.
3.Upon hearing busy tone, press “3.”
l The phone issues a 
ringback tone.
.l If the Camp-on feature is not available, the phone...

Chapter 5. DSLT FeaturesSection 700 - Operation
lAn extension can only have one call camped on at a time. For example, if
Extension 152 camps on to Extension 153, another extension cannot camp
on to 153, as long as 152 is camped on.
lAn extension that has initiated a camp-on cannot receive a camp-on. For
instance, if Extension 200 has 
camped on to Extension 300, another
extension cannot camp on to 200.
lFor CPC-B 5.03 and above, callbacks are not forwarded. For example, if
Extension 200 is call...

Section 700 - OperationChapter 5. DSLT Features
3.Press CONF when your call is answered.
Considerations
lPress the FLASH key to exit a Conference Call.
lThe Hold feature cannot be used during a three-party conference.
Dial “0” for Attendant
(All Versions)Description
The Attendant can be called from any extension by pressing 
“0.”*
OperationIf multiple attendants are assigned, dial “0” calls goes to Attendant “1” first.
If attendant “1” is busy, the call then goes to Attendant “2.” The call
continues to...