Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chapter 5. DSLT FeaturesSection 700 - Operation
Dial Tone Disable
(All Versions)Description
The intercom dial tone can be turned off at a phone. Dial tone is turned off
when a headset is used.
Operation
To disable the intercom dial tone:
1.Press the ON/OFF key.l The phone issues intercom dial tone.
2. Press 
‘MO.”
3.Press the ON/OFF key.
To reactivate dial tone:
Repeat the preceding steps.
Direct Trunk Access
(All Versions)Description
Extension users can access specific trunks for outgoing calls....

Section 700 - OperationChapter 5. DSLT Features
Do-Not-Disturb (DND)(All Versions)
DescriptionAn extension can be made unavailable by activating Do-Not-Disturb (DND).
Calls to extensions with DND activated receive busy tone.
Operation
To activate DND:
1.Lift the handset or press ON/OFF.2. Dial “73.”
3.Replace the handset or press the ON/OFF key.
To cancel DND:
1.Lift the handset or press ON/OFF.2. Dial “73.”
3.Replace the handset or press ON/OFF.
Related Programming
lFFl (System): Extension Class of...

Chapter 5. DSLT FeaturesSection 700 - Operation
routed to the extension defined in permanent call forwarding.
The following types of incoming trunk calls will follow permanent call
forward settings:
- Direct trunk calls (including DID/DNIS)
- Transferred trunk calls.
lThe DND feature cannot be activated at an extension selected to receive
Call Forwarding.
Intercom Calling
(All Versions)
DescriptionsThe DBS provides two methods of intercom calling: voice calling and tone
calling.
Voice Calling. With voice...

Section 700 - OperationChapter 5. DSLT Features
3.If the system default is voice calling, dial a “1.”
The called extension rings.
Related Programming
l FFl (System): Extension Intercom Callingl
FFl (System): Alert Tone for Voice Calls
lFFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 4.0 or higher)l
FF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 4.0 or higher)
Considerationsl
When an extension’s calling mode is set to voice calls, a “splash”...

Chapter 5. DSLT FeaturesSection 700 - Operation
Considerations
lIf the Auto Flash Redial feature is set, you can flash the outside line once
by pressing the 
REDIAL key at the busy tone. The last number dialed can
then be redialed.
lThe Last Number Redial feature can redial a number up to sixteen digits
long.
lA maximum of five Speed Dialing codes can be redialed.
Meet-Me Answer _
(All Versions)
Description
You can answer a Paging call from any extension using the Meet-Me Answer
feature.
Operation
.1....

Section 700 - OperationChapter 5. DSLT Features
Message Waiting/Callback Request
(All Versions)
DescriptionIf you call an extension that is busy or does not answer, you can leave a
message requesting a return call.
Operation
To leave a Message Waiting/Callback Request:1. Lift the handset.
2.Dial the extension number.
3.Dial “2” at the busy tone or while the telephone is still ringing.
.4. Replace the handset.
To answer a Message Waiting/Callback Request:
1.Pick up the handset.The phone issues intercom...

Chaoter 5. DSLT FeaturesSection 700 - Operation
Related Programming
Considerb tions
.
.
.FFI (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 3.01 or higher)FF3 (Extension): Extension Class of Service Setting 
(CPC-AI1 and CPC-B
Version 3.01 or higher)Up to four Message Waiting/Callback Requests can be sent to one
extension.
If you call an extension a second time and the party answers, a Message
Waiting/Callback Request you sent earlier will be cancelled.
If a Message...

Section 700 - Operation
2.Dial the desired extension number.
3.Upon hearing busy tone, press “5.”
Chapter 5. DSLT Features
To transfer a call using OHVA1. Press the HOLD key.
2.Dial the number of the extension to which the call will be transferred.
Your phone issues a busy tone if the extension is already on a call.
3.Press “5” and announce the call to be transferred.
If the transferred call is not accepted by the called extension, press the
FLASH key to cancel the transfer.4. Press “8.”
5. Replace the...

Chapter 5. DSLT FeaturesSection 700 - OperationlIf the transferred call is not answered immediately, it will queue for a
specified time and then return to the extension sending the OHVA. (The
recall time is set in the Transfer-Recall Timer.)
lYou cannot receive a Call Waiting message during an OHVA.
lYou cannot toggle back and forth between two calls during an OHVA.
Onhook Dialing
(All Versions)
Description
To use onhook dialing. press the ON/OFF key.The DSLT does not have a microphone, so the user must...

Section 700 - OperationChapter 5. DSLT FeatureslFF2 (Trunks): Pooled Trunk Access for Group “9”
lFF2 (Trunks): Pooled Trunk Access for Groups “8 l-86”
lFF3 (Extension): Forced Least Cost Routing
l FF8 (LCR): LCR Settings (all)
ConsiderationslThere are seven groups of outside lines: 9 and 81-86. Some additional
outside lines may not be assigned to a group.
lDialing “9” activates LCR if the LCR option is enabled.
Reminder Call
(All Versions)
DescriptionWith the Reminder Call feature, your telephone can act...