Panasonic Cpc+AII/B Digital Business System Release Notes Manual

Chaoter 4. Key TeleDhone FeaturesSection 700 - ODeration
3. Hang up.
Related Programming
lFFl (System): Call Forward No Answer Timer (CPC-AI1 and CPC-B
Version 3.1 or higher)
lFFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
Version 3.1 or higher)
lFF3 (Extension): Extension Class of Service Assignment (CPC-AI1 and
CPC-B Version 3.1 or higher)
lFF3 (Extension): Permanent Call Forward Type (CPC-AII and CPC-B
Version 3.1 or higher)
lFF3 (Extension): Permanent Call Forward Extension...

Section 700 - OperationChapter 4. Key Telephone Features
lVoice calls do not forward when Call Forwarding--No Answer is used.
.
If several calls arrive at once at an extension set for Call Forwarding-No
Answer, all of the calls will be queued. (The timing for each call begins
with the ringing tone.)
lExtensions for which Call Forwarding-External has been set cannot:
-Be in the middle of an outside call when the feature is activated.
- Have a toll restriction setting that prohibits outside calls.
lCalls...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Call Hold
(All Versions)The DBS provides both Exclusive and System Hold.
Exclusive HoldDescription
With Exclusive Hold, only the extension that held the call can retrieve it.
Exclusive Hold can be used to hold CO calls and intercom calls.
Operation
To place a call on Exclusive Hold:Press the line key being used for the call.
The line LED flashes green. and the phone issues intercom dial tone.
“Hold TRK #XX” (where “XX” is the outside line number)...

Section 700 - OperationChapter 4. Key Telephone Features
lFFl (System): Non-Appearing Central Office Line Hold
Considerations
lWhen using an outside line for which there is no line key on your
extension, press the HOLD key to place the call on hold, and then press a
vacant line key. Release the held call by pressing HOLD again. (System
programming determines whether the call will be placed on Exclusive
Trunk Hold or System Trunk Hold.)
lA held call will recall if it is not retrieved before the Hold...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
l“Hold 
TRK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Hold from the extension that
placed it there:Press the line key that is flashing green.
lThe line LED stops flashing and remains lit.
l“CO TALK #XX” (where “XX” is the outside line number) appears on the
display.
To release a call placed on System Trunk Hold from a different
extension:Press the line key that is flashing red.
lThe line...

Section 700 - OperationChapter 4. Key Telephone Features
If the Automatic Outside Line Hold feature is programmed for your
system, pressing any other line key will place your original call on System
Hold.A held call will recall if it is not retrieved before the Hold Recall Timer
expires. “Hold Recall #XX” (where “XX” is the outside line number)
appears on the display if a call has been held beyond the time limit.
If you press the HOLD key during a conference with two outside lines.
both outside lines...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Call Park
(All Versions)Description
You can use the Call Park function to transfer a call, even if you cannot locate
the intended recipient of the call. Simply park the call, and then page the
person you want to transfer to. That person can answer the call from any
extension by dialing the Call Park Retrieve Code (76) followed by the
number of the extension that parked the call.
Upera tion
To park a call:
1.Press the HOLD key.2. Dial “75.”
“Park...

Section 700 - OperationChapter 4. Key Telephone Features
3.Enter the Park Number assigned to the call.
“PARK PICK XX” (where “XX” is the park number) appears, and then
“CO TALK #XX” (where “XX” is the trunk number of the call) appears.
Related Programmingl
FFl (System): Attendant Park Hold Recall Timer
lFFl (System): Extension Park Hold Recall Timer
Considerations
lAn alarm tone is issued if a parked call is not released before the Recall
Timer expires (determined by system programming). If this happens,...

Chapter 4. Key Telephone FeaturesSection 700 - Operation
Operation
1.Pick up the handset.The phone issues intercom dial tone.
2. Dial “79.”
3.Enter the number of the ringing extension.
lThe extension number or the outside line number of the caller appears
on the display.l The EXT LED lights on the 
MC0 or ML key.
4.Complete the call and replace the handset.
The EXT LED goes off.
Related Programming
lFFl (System): Extension Class of Service Setting (CPC-AI1 and CPC-B
3.1 or higher)
lFF3 (Extension):...

Section 700 - OperationChapter 4. Key Telephone Features
Group Call Pickup
Des&p tionUsing the Group Call Pickup feature, you can answer calls to other extensions
in your Paging Group without entering the number of the ringing extension.
Group Call Pickup can also be programmed into an FF key.
Operation1. Pick up the handset.
The phone issues intercom dial tone.
2. Dial “70.”
l The extension number or the outside line number of the caller appears
on the display.l The EXT LED lights.
3.Complete the call...