Oce TCS400 User Manual

							System specifications 301
Specifications drivers and job submission software
Océ drivers 
Optional application software
Software environment Required driver Remarks
Microsoft
® Windows® 9.x, 
ME, 2000, NT 4.0, XPWindows® Printer Driver Generating 
HP-GL/RTL
AutoCAD
® 14 (on all sup-
ported platforms)Océ ADI 
AutoCAD
® 
2000/2001/2002 (on all 
supported platforms)Océ HDI 
Graphical application soft-
ware on Microsoft
® Wi n-
dows, Apple® Macintosh 
and Unix™ PostscriptOcé Postscript 3
Function Application software
Job submission
■Océ Print Exec® Workgroup
■Océ Print Exec® LT
■Océ Print Exec® Pro
■Océ Repro Desk
Vi ew i ng
■Océ View Station LT
■Océ View Station
■Océ View Station and Batch Processor
Downloaded From ManualsPrinter.com Manuals 
						

							302 Océ TCS400 User manual
Downloaded From ManualsPrinter.com Manuals 
						

							303
Océ TCS400
User manual
Appendix B
Safety information
Downloaded From ManualsPrinter.com Manuals 
						

							304 Océ TCS400 User manual
Instructions for safe use
Introduction
Océ designed products are tested in accordance with the strictest international 
safety standards. It is important that you observe the safety rules included in 
this appendix to help assure safe working with the Océ TCS400.
Maintenance
■Do not remove any screws from fixed panels.
■Do not do any maintenance activities other than the maintenance activities 
for the parts and the maintenance materials described in this manual.
■Do not place any liquids on the machine.
■Use maintenance materials and other materials for their original purpose 
only.
■Keep maintenance materials away from children.
■Do not mix cleaning fluids or other substances.
■To avoid the risk of introducing hazards, all modifications to Océ equipment 
are strictly reserved to properly qualified and trained service technicians.
Connection
Attention: Do not move the machine yourself, but contact your Customer 
Service.
It is recommended to connect only those products which meet the (inter)nation-
al product safety and radio frequency interference standards, and to use an at-
tachment cable as specified by Océ.
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information305
■If for some reason you have to move the machine yourself, please make sure 
that the mains power point has the right fuse capacity. See the Océ TCS400 
safety data sheet in this appendix for information about maximum current.
■Do not bridge any mechanical or electrical circuit breakers.
■Do not use an extension lead to connect the machine.
■This machine is not designed for connection to an IT power system. An IT 
power system is a voltage network in which the neutral wire is not 
connected to earth.
■When the machine is connected through a wall socket, place the machine 
near a wall socket that is easily accessible.
■When the machine is connected through a fixed connection to the electricity 
grid, the disconnect device in the fixed connection must be easily 
accessible.
Surroundings
■Make sure that the machine is placed on a level, horizontal surface of 
sufficient strength. See the Océ TCS400 safety data sheet in this appendix 
for information about the weight of the equipment.
■Make sure there is sufficient space around the machine. This facilitates 
reloading materials as well as maintenance.
■Do not place the machine in rooms which are subject to excessive vibration.
■Do not place the machine in rooms which are too small or insufficiently 
ventilated. See the Océ TCS400 safety data sheet in this appendix for 
information about space and ventilation requirements.
General
■Always use materials recommended by Océ and developed for the Océ 
TCS400. Materials not approved by Océ can cause errors in your machine.
■Do not use the machine when it is emitting unusual sounds. Remove the 
plug from the power socket or turn off the fixed connection to the electricity 
grid and contact Customer Service.
Note:This is a class A product. In a domestic environment, this product may 
cause radio interference, in which case the user may be required to take 
adequate measures.
Downloaded From ManualsPrinter.com Manuals 
						

							306 Océ TCS400 User manual
Safety data sheets
Introduction
The disclaimer below applies to all safety data sheets in this manual. Contact 
your local Océ organization for questions about Océ products regarding health, 
safety and environment. You can find the address of your local Océ 
organization in appendix C of this manual.
Disclaimer 
The safety data sheets in this manual have been compiled to the best of our 
knowledge. They are intended as a compact guide to the safe handling of this 
product. We reserve the right to revise safety data sheets, as new information 
becomes available. It is the users responsibility to determine the suitability of 
this information for the adoption of safety precautions as may be necessary. It 
is the users responsibility to contact Océ to make sure that the safety data 
sheets are the latest ones issued. If and in so far as limitation of liability is 
permitted under the applicable laws, we do not accept liability for any 
inaccuracy that may occur in this information. 
Note:Not all safety data sheets were available at the moment this manual was 
published. The Océ organization in your country will be pleased to send you a 
copy of the missing sheets. You can find the address of the Océ organization in 
your country in appendix C of the user manual.
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information307
Product safety data sheet Océ TCS400 printer
The content of this safety data sheet is subject to the disclaimer of liability on 
page (see ‘Disclaimer’) of this manual. 
Material safety data sheet Océ inksOcé TCS400
This safety data sheet was not available at the time this manual was published.
Downloaded From ManualsPrinter.com Manuals 
						

							308 Océ TCS400 User manual
Product safety data sheet Océ TCS400 scanner
The content of this safety data sheet is subject to the disclaimer of liability on 
page (see ‘Disclaimer’) of this manual. 
PRODUCT SAFETY DATA SHEET
Océ-USA, Inc.
NumberE-760-a-US
DateJune 2003
Copyright © 2003 Océ-Technologies B.V., Venlo, NL
Model Océ TCS400 Scanner
DescriptionWide format color scanner
Scan width
Scan speed40 “ 
0,5 m/min
Dimensions Width1340 mm
Depth490 mm
Height1070 mm
Weight102 kg
Vo l t a g e100-240 V
Frequency50-60 Hz
Current-rated1.1-0.45 A
Power consumption, plug-in58 W (incl user interface)
Power consumption, stand by104 W (incl user interface)
Power consumption, operation119 W (incl user interface)
Mains connectionCable with plug
Safety classI (IEC 536) Protective earth connection
Protection classIP X0 (IEC 529)
Sound pressure level
(at operator position)Standby In operation
26 dB(A) main-body 51 dB(A); 
impulse  L
i =8 dB(A)
Sound power level37 dB(A) main-body 61 dB(A)
Radio interferenceComplies with Directive 89/336/EEC and FCC rules and regulations, part 15 Class A.
RadiationBelow the Threshold Limit Values for UV, Visible and IR radiation (TLV list of ACGIH)
Heat emissionStandby 104 W; in operation 119 W
Ozone emissionNot applicable
Room volume
Recommendation: min. 15 m
3Room ventilationRecommendation: min. 7.5 m3/h (natural ventilation)
Use simulation at random 
operationNot applicable
ConsumablesNot applicable
Additional safety informationNone
Listed according to standard UL 1950 and CAN/CSA-C22.29 No.950
Downloaded From ManualsPrinter.com Manuals 
						

							Safety information309
EPA ENERGY STAR®
Introduction
Océ-Technologies B.V. has joined the ENERGY STAR® Program of the United 
States Environmental Protection Agency (EPA). The purpose of the E
NERGY 
S
TAR® Program is to promote the manufacturing and marketing of 
energy-efficient equipment, thereby potentially reducing combustion-related 
pollution. Using the energy management features outlined below prevents 
unnecessary power consumption, which helps to prevent air pollution from 
electricity generating plants and saves money on your utility bills.
As an E
NERGY STAR® Partner, Océ-Technologies B.V. has determined that this 
printer model meets the E
NERGY STAR® guidelines for energy efficiency.
See the Product Safety Data Sheet in this appendix for power use data.
Attention: If this printer is upgraded to a multifunctional device by adding a 
wide format color scanner, the system does not comply with the ENERGY STAR 
sleep mode specification for a wide format multifunction device. The Energy 
Star
® logo which appears in the printer operator panel only refers to the 
printer.
Downloaded From ManualsPrinter.com Manuals 
						

							310 Océ TCS400 User manual
Features
The EPA ENERGY STAR® Criteria for printers involves the following feature.
■Sleep mode
The power use of some functions is automatically decreased to save energy. 
The printer enters the sleep mode 30 minutes after the last print job is 
completed. The key operator can adjust this default time within a range 
between 30 and 240 minutes.
It is suggested that you determine the appropriate default time for your work 
pattern by changing the setting in increments of 30 minutes and testing each 
setting for at least a week. If, due to your usage pattern, a 240 minute limit 
still causes sizable inconvenience, the key operator can disable the sleep 
mode.
E
NERGY STAR® is a U.S. registered mark.
Downloaded From ManualsPrinter.com Manuals