Nortel Modular Ics 6.1 System Coordinator Guide

Tracking your incoming calls / 141
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Creating a password to your Call Log
To access your Call Log through a password:
1. Press ²¥¡Þ. The displays reads New passwrd:.
2. Enter your four-digit password. 
The display reads Repeat New:.
3. Re-enter your four-digit password. The display reads 
Password changed, which confirms that your password 
has been assigned.
To enter Call Log using your password:
1. Press ²¡ÚÛ to enter Call Log. If you have 
programmed...

142 / Tracking your incoming calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Deleting an assigned password
Use this procedure when you want to delete an assigned 
password.
1. Press ²¥¡Þ. The display reads Old passwrd:.
2. Enter your old password. 
3. The display reads New passwrd:.
4. Press ³ or OK
. 
The display reads No pswd assigned, which confirms 
that your password has been deleted.
Programming a telephone to log calls automatically
Your installer or customer service representative can...

Tracking your incoming calls / 143
P0603535  02 Modular ICS 6.1 System Coordinator Guide
One or more log entries have been deleted 
by the Autobumping feature while you are 
looking at the Call Log.
Hold or release your active call before 
entering Call Log.
The external line is in use.
The repeat call counter, shown along with 
time and date, indicates the number of calls 
you received from the same caller.
This call was answered at another 
telephone (227).
This call was logged manually.
This call was...

144 / Tracking your incoming calls
Modular ICS 6.1 System Coordinator Guide P0603535  02
Using external Voice mail
If you subscribe to a voice message service outside your 
office, you can access that service through your Norstar 
system. Your installer or customer service representative 
programs your Norstar telephone to indicate when you have a 
voice message waiting on a particular line. 
To find out if your external voice message service works with 
Norstar, or if you have any problems with your...

P0603535  02 Modular ICS 6.1 System Coordinator Guide
Customizing your telephone
Finding out what a button does using 
Button Inquiry
²¥â
You can use this feature to check the function of any line, 
intercom, or programmed button on your telephone. 
On the M7100 and the T7100 telephones, Button Inquiry 
shows your internal number followed by the function assigned 
to your single memory button.
Displays
The display shows the number and name 
of the line. Press 
SHOW to view the 
redirection status of the...

146 / Customizing your telephone
Modular ICS 6.1 System Coordinator Guide P0603535  02
Changing the set display contrast
Use this feature to adjust the contrast on your set.
1. Press ²¥à.
2. Press a number on the dialpad to choose the contrast level 
you prefer. 
On a two-line telephone, you can use the UP
 and DOWN display 
buttons to adjust the contrast. The number of contrast levels 
available varies from one telephone model to another.
Changing the language on the display
You can select the language...

Customizing your telephone / 147
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Programming a feature code onto a 
memory button
You can program a feature code onto a memory button. In 
some cases, pressing the button a second time cancels the 
feature.
Programming feature buttons
Any memory button not programmed as an external or internal 
line, target line, Answer button, or handsfree/mute button, is 
available for features.
1. Press ²¥Ü.
2. Press the memory button you want to program with a...

148 / Customizing your telephone
Modular ICS 6.1 System Coordinator Guide P0603535  02
Displays
The name of the feature assigned to a button 
is displayed when you press the button.
 SHOW 
appears when there is more information 
available. Press 
£ or SHOW for additional 
information.
If you are checking a speed dial button, enter 
the three-digit speed dial code that you want 
to check.
Enter the feature code, or press ¨ or QUIT 
to quit programming or CLEAR to clear the 
numbers you have entered. The...

Customizing your telephone / 149
P0603535  02 Modular ICS 6.1 System Coordinator Guide
Labeling your set
The Business Series Terminals have label strips that come 
with each telephone. You can print the label for each button on 
your telephone and install the strip beside the buttons. The 
Norstar M-series telephones have individual keycap labels. 
This section suggests the process for setting up the labelling 
for your set.
Applying button labelling
Before you apply button labels, use the Button Inquiry...

150 / Customizing your telephone
Modular ICS 6.1 System Coordinator Guide P0603535  02
Norstar button caps
The Norstar M-series has two types of button caps:
Unlabeled, clear button caps with appropriate green or 
grey paper for line numbers, telephone numbers, and 
features
Pre-printed, colored button caps in green or grey
Some examples of pre-printed button caps
Default button assignments
During Startup, the Norstar installer chooses one of the 
available templates. Default features are assigned...