Nortel Compact Ics 6.1 System Coordinator Guide

Tracking your incoming calls / 141
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Deleting old log items (autobumping)
²¡ÚÞ
Your log has a set number of items that it can hold. When it becomes full, 
new calls cannot be logged. When your log is full, Autobumping 
automatically deletes the oldest Call Log item when a new call is logged.
Press 
²¡ÚÞ to enable autobumping.
Press 
²£¡ÚÞ to disable autobumping.
Viewing your Call Log
²¡ÚÛ
To view your log
1. Press 
²¡ÚÛ. The display shows the number...

142 / Tracking your incoming calls
Com pact ICS 6.1 System Coordinator Guide P0603544   02
If you accidentally erase an item, you can retrieve it.
1. Press 
³ or UNDO immediately after accidentally erasing an item.
2. Press 
¨ to exit.
Making a call using Call Log
You may find it helpful to place calls from within your Call Log. The 
number stored for each call may vary depending on the type of call. For 
example, if the call was placed from a Centrex or PBX system, the first few 
numbers may need to be...

Tracking your incoming calls / 143
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
To enter Call Log using your password
1. Press 
²¡ÚÛ to enter Call Log. If you have programmed a 
password, the display shows
 Password:.
2. Enter your four-digit password.
If you forget your Call Log password, it can be deleted in programming. 
See ‘‘Using passwords’’ on page 225.
Changing your Call Log password
²¥¡Þ
1. Press ²¥¡Þ. The display shows Old passwrd:.
2. Enter your old password. The display shows
 New...

144 / Tracking your incoming calls
Com pact ICS 6.1 System Coordinator Guide P0603544   02
The callers number is unavailable.
_ indicates a new item.
¯ indicates that the call was answered.
§ indicates a  long distance call.
/ indicates that the stored number has been 
shortened to its final 11 digits. Press 
à 
or 
MORE to display additional information about the 
call.
One or more log entries have been deleted by the 
Autobumping feature while you are looking at the 
Call Log.
Hold or release your...

Tracking your incoming calls / 145
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Using Voice mail
If you subscribe to a voice message service outside your office, you can 
access that service through your Norstar system. Your installer or customer 
service representative programs your Norstar telephone to indicate when 
you have a voice message waiting on a particular line. 
To find out if your external voice message service works with Norstar, or 
if you have any problems with your service,...

146 / Tracking your incoming calls
Com pact ICS 6.1 System Coordinator Guide P0603544   02 

P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Customizing your telephone
Finding out what a button does using 
Button Inquiry
²¥â
You can check the function of any line, intercom, or programmed button 
on your telephone by pressing
 ²¥â. On the M7100 or T7100 
telephone, Button Inquiry shows your internal number followed by the 
function assigned to your single memory button. 
Displays
Making the display darker or lighter using 
Contrast adjustment
1. Press ²¥à.
The display shows the number...

148 / Customizing your telephone
Com pact ICS 6.1 System Coordinator Guide P0603544   02
2. Press a number on the dialpad to choose the contrast level you like 
best. 
On a two-line telephone, you can use the 
UP and DOWN display buttons to 
adjust the contrast.
The number of contrast levels available varies from one telephone model 
to another.
Changing the language on the display
You can select the language used on the display of each Norstar telephone. 
Which languages are supported depends on the...

Customizing your telephone / 149
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Programming a feature code onto a 
memory button
You can program a feature code onto a memory button. In some cases, 
pressing the button a second time cancels the feature.
Programming feature buttons
²¥Ü
Any memory button not programmed as an external or internal line, target 
line, Answer button, or handsfree/mute button, is available for features.
1. Press 
²¥Ü.
2. Press the memory button you want to program with...

150 / Customizing your telephone
Com pact ICS 6.1 System Coordinator Guide P0603544   02
Displays
The name of the feature assigned to a button is 
displayed when you press the button.
 SHOW 
appears when there is more information 
available. Press 
£ or SHOW for additional 
information.
If you are checking a speed dial button, enter 
the three-digit speed dial code that you want to 
check.
Enter the feature code, or press ¨ or QUIT to 
quit programming or
 C LE A R to clear the numbers 
you have entered....