Home > Nortel > Communications System > Nortel Compact Ics 6.1 System Coordinator Guide

Nortel Compact Ics 6.1 System Coordinator Guide

Here you can view all the pages of manual Nortel Compact Ics 6.1 System Coordinator Guide. The Nortel manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 161

Customizing your telephone / 161
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Default button assignments
Default features are assigned automatically to the programmable buttons 
on Norstar telephones and vary depending on the telephone. The default 
features are listed in the tables in this chapter.
Rules of default button assignment
Line and Intercom buttons are assigned by default templates and can 
be changed in programming. 
Handsfree/mute and answer DN buttons are not assigned by...

Page 162

162 / Customizing your telephone
Com pact ICS 6.1 System Coordinator Guide P0603544   02
Moving line buttons
²¥¡Ú
You can move external lines to different buttons on your telephone to 
arrange your lines in the way that makes the most sense to you.   If you have 
a CAP, you cannot move intercom, answer keys or handsfree/mute buttons 
onto the module, but you can move your lines over to the modules. If you 
have a T7316E CAP with eKIMs you can move lines, target line 
appearances and hunt group...

Page 163

Customizing your telephone / 163
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Changing the type of ring
²¥ß
You can choose one of four distinctive rings for your telephone. This 
makes it easier to identify your telephone in an open office.
1. Press 
²¥ß.
2. Press 
Ú, Û, Ü, Ý, or NEXT. You hear the selected ring for two 
seconds.
3. Repeat until you hear the ring you prefer, then press
 ³ or OK.
Adjusting the Ring volume
²¥¡â
1. Press ²¥¡â. The telephone rings.
2. Press 
à to adjust the...

Page 164

164 / Customizing your telephone
Com pact ICS 6.1 System Coordinator Guide P0603544   02 

Page 165

P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
User Preferences
The User Preferences section of programming allows you to program 
memory buttons, speed dial codes and other settings for any Norstar  or 
BST telephone on the system.
For example, an employee may want to have the Do Not Disturb feature 
programmed onto a memory button or may want to create a speed dial 
code. Instead of programming from the employee’s telephone, you can go 
into programming on the telephone nearest you to make...

Page 166

166 / User Preferences
Com pact ICS 6.1 System Coordinator Guide P0603544   02
User Preferences programming is available under  User Preferences 
under the heading Terminals&Sets.
Sub-headings in User Preferences
Changing button programming
Press ≠ at Button prgrming. The display shows the number of 
buttons on the telephone (an example is shown in Displays at the end of this 
section).
If the telephone has a CAP module, you can press
 CAP1 or KIM1 to see the 
buttons on the module. 
Press 
‘ to move...

Page 167

User Preferences / 167
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Information about individual displays you may see is described at the end 
of this section.
Changing a User Speed Dial
1. Press ≠ at User Speed Dial. The display shows the number 
of speed dial codes that are available.
2. Press 
‘ to see the first speed dial code (256).
3. Press 
‘ to move through all the speed dial codes. 
4. Press 
≠ at the code you want to change.
5. Press 
CHANGE and enter the telephone number the same...

Page 168

168 / User Preferences
Com pact ICS 6.1 System Coordinator Guide P0603544   02
Changing Call Log options
1. Press ≠ at Call log opt’ns…
2. Press CHANGE until you see the option you want to use. See ‘‘Call Log 
options’’ on page 140 
Changing how calls are dialed
1. Press ≠ at Dialing opt’ns…
2. Press CHANGE until you see the option you want to use.
Descriptions for dialing options are found on the Telephone Feature 
Card, or see ‘‘Changing how you dial your calls’’ on page 77. 
Changing the language used...

Page 169

User Preferences / 169
P0603544   02 Compact ICS 6.1 Syste m Coordin ator Guide
Displays
There are 10 memory buttons and 12 dual 
memory buttons on the telephone you are 
viewing. Press 
‘ to begin looking at 
what is on each button.
A line appears on the button. You cannot store a 
feature or number on it.
A feature is stored on this button. Press 
≠ 
to see the feature code. A full list of 
names and codes for features is included in the 
index.
Shows the feature code stored on a button. Press 
≠ to...

Page 170

170 / User Preferences
Com pact ICS 6.1 System Coordinator Guide P0603544   02 
Start reading Nortel Compact Ics 6.1 System Coordinator Guide

Related Manuals for Nortel Compact Ics 6.1 System Coordinator Guide

All Nortel manuals