Nortel Compact Ics 6.1 Installer Guide

Lines / 171
P0603539  02Compact ICS 6.1 Installer Guide
You can make changes to restriction filters under both Terminals&Sets, 
and 
Lines. Any changes will take effect for any telephone, line or line on 
a telephone regardless of where the programming was changed.
See the description and procedures for restriction filters under 
Terminals&Sets in this guide on page 142 for more information.
Line restrnsInstaller password required
Specify the filter to be applied to this line to restrict the numbers that...

172 / Lines
Compact ICS 6.1 Installer GuideP0603539  02
Remote restrnsInstaller password required
Specify the restriction filter to be applied to remote callers calling in to the 
Norstar system on this line. A restriction filter is a set or group of 
restrictions and overrides. 
As with line restrictions, you can apply a different remote restriction for 
normal service and for each of six schedules.
Use 
CHANGE and the dialpad to program the remote restrictions for each 
schedule. The default...

Lines / 173
P0603539  02Compact ICS 6.1 Installer Guide
Telco featuresInstaller password required
VMsg center 1
If you subscribe to an external voice message service, you can specify 
which voice message center is used for each external line that can receive 
message waiting indication. For each line, press 
CHANGE to select the 
setting: 
1, 2, 3, 4, 5, or N (None).
You enter the telephone numbers for each of the five voice message centers 
under the general Telco features heading. 

174 / Services
Compact ICS 6.1 Installer GuideP0603539  02
 Services
Using Services, you can control three types of service by the time of day 
and day of week:
alternate call ringing for certain times and days
alternate dialing restrictions for certain times and days
alternate call routing for certain times and days
Each of the three services has six schedules that you can customize. For 
example, you may want to combine alternate call ringing with alternate 
dialing restrictions for lunchtime,...

Services / 175
P0603539  02Compact ICS 6.1 Installer Guide
Ringing serviceInstaller password required
At certain times or in certain situations, you may want additional 
telephones to begin ringing for incoming lines. The most common use of 
this feature is when a security desk telephone begins to ring for incoming 
lines after 5:00 p.m., a practice often called night service. These features 
are programmed under Ringing service.
Ring Groups
Ring groups allows you to define groups of extended ringing...

176 / Services
Compact ICS 6.1 Installer GuideP0603539  02
Service
Use ≠, ‘, and CHANGE to change the setting for each 
schedule: 
Off, Automatic, or Manual.
Manual allows you to turn the service on and off at any time from a control 
telephone using the Ringing service feature code.
Automatic allows you to program a stop and start time for a service. You 
are still able to start and stop the service by entering the appropriate 
Services feature code at a control telephone. If you select this setting,...

Services / 177
P0603539  02Compact ICS 6.1 Installer Guide
ExtraDial telephone
ExtraDial telephone allows you to assign an additional direct-dial 
telephone in the Norstar system for each schedule you use.
Use 
CHANGE and the dialpad to enter the internal number of the extra-dial 
telephone.
Line settings
The ring groups and auxiliary ringer use for Ringing service is 
programmed for each line individually.
Ring group
You can assign a pre-defined ring group to a line for each schedule. See 
Ring groups...

178 / Services
Compact ICS 6.1 Installer GuideP0603539  02
Aux. ringer
Indicate whether the auxiliary ringer (if installed) also rings when Ringing 
service is on. Press 
CHANGE to select the setting: Y(Yes) or N(No).
Restrn serviceInstaller password required
Indicate how the alternate dialing restrictions should be activated for each 
of the schedules.
Use 
≠, ‘, and CHANGE to change the setting for each 
schedule: 
Off, Automatic, or Manual.
See Ringing service in this section for descriptions of the...

Services / 179
P0603539  02Compact ICS 6.1 Installer Guide
Routing serviceInstaller password required
The programming for routing service decides what path an outgoing call 
takes using the digits that are dialed. It is sometimes called automatic route 
selection (ARS).
When you select an internal line and dial, the numbers you enter are 
checked against the routing tables. If the number you dialed starts with a 
destination code, the system uses the line pool and dials out digits specified 
by the route...

180 / Services
Compact ICS 6.1 Installer GuideP0603539  02
RoutesInstaller password required
Press ≠ and enter a three-digit route number (000-999).
DialOut
Press ≠ and enter the DialOut digits (up to 24), or press CLR to 
choose 
No numbr.
You can press ²à¡ to insert a 1.5-second pause in the dialing string, 
if necessary.
Route 000 has no DialOut by default and cannot be changed.
For example, the system will not allow you to enter a 
destination code that starts with 2 if your internal number 
system...