Nortel Compact Ics 6.1 Installer Guide

Programming tools / 131
P0603539  02Compact ICS 6.1 Installer Guide
Ring volume, User speed dial and CAP module memory button 
programming are not copied with User data.
User data that copies:User data that does not copy if 
destination set type is the same 
as the source set type:
Language choice
Ring type
Calls log options 
(Auto logging)
Display contrast
Dialing options (automatic, pre-dial, 
standard)
External autodial button 
assignments
Internal autodial button 
assignments
Programmable button...

132 / Profiles and Dialpads
Compact ICS 6.1 Installer GuideP0603539  02
Profiles and Dialpads
Use Profile programming to determine which types of trunks are 
supported, and which are supported on and off core.
Use Dialpad programming to define how your system will handle the 
letters Q and Z from the dialpad.
Profile programming
If your system is outside of North America, you may require a different 
operating profile for your system. You must choose these parameters 
before you perform your system...

Profiles and Dialpads / 133
P0603539  02Compact ICS 6.1 Installer Guide
Profile 1
This profile is the default profile. It supports cards and protocols for 
Canada and the United States. This profile has language support for 
English, Canadian French, and Spanish. The mu-law companding law is 
used in this profile.
Profile 2
This profile is for international systems that use ETSI ISDN lines with 
aLaw. The languages supported include: English, French, Spanish, and 
Turkish.
Profile 3
This profile provides...

134 / Profiles and Dialpads
Compact ICS 6.1 Installer GuideP0603539  02
Profile 4
This profile provides language support in English, French, and Spanish. 
This profile is for countries who use NI ISDN protocol with mu-law 
(i.e. some areas in the Caribbean).
Changing the profile
If your system is in North America or you know that you want to run the 
North American profile, you do not need to run this program.
If you need to change the profile, follow these steps:
1. Enter the Profile access code from a...

Profiles and Dialpads / 135
P0603539  02Compact ICS 6.1 Installer Guide
Dialpad programming
Use this program to determine how the system will recognize the 
characters Q and Z from a set dialpad. The two types of configurations are 
called CCITT and non-CCITT.
The default is non-CCITT, where Q and Z are accessed through the 
â
dialpad button. 
CCITT systems access these characters through the 
à (Q) and á (Z) 
dialpad keys.
To change the setting, follow these steps:
1. Enter the Dialpad access code from...

136 / Startup programming
Compact ICS 6.1 Installer GuideP0603539  02
Startup programming
After the hardware has been installed and powered up, use Startup to 
initialize the system and select the Startup template.
Performing Startup
1. Enter the Startup access code from a two-line display telephone 
dialpad by pressing
  which is the 
same as
 ²¥¥à¡Ûà¡¡à.
To be accepted, the Startup code must be entered no later than 15 
minutes after the Norstar system has been powered up and the 
telephone displays...

Startup programming / 137
P0603539  02Compact ICS 6.1 Installer Guide
Changing the default telephony template
After entering the Startup access code and Installer password the display 
shows
 Reset memory?.
1. Press 
YES to select a default telephony template. The display shows the 
current template.
2. Press 
CHANGE to choose one of three templates (Square, PBX, or 
Hybrid). With the display showing the current template.
3. Press 
‘. The display shows the current start DN.
4. Press 
CHANGE.
5. Enter the...

138 / Startup programming
Compact ICS 6.1 Installer GuideP0603539  02
Programming may be lost after three or more 
days without power.
All programming is retained for three days if the 
power fails or if the Norstar system is powered off. 
After three days without power, it may be 
necessary to perform Startup.
Tip - The length of the new DN (internal number) can 
be from two to seven digits.
Note: Systems that want to use Hunt Groups or 
Hospitality Services must have a minimum of three-digit 
DNs.
The...

Programming / 139
P0603539  02Compact ICS 6.1 Installer Guide
Programming
After performing Startup, use programming to change default settings as 
required. Default settings for the Square template are shown in bold.
Headings and subheadings in programming help you to keep track of where 
you are.
 Programming has the following main headings:
Terminals&Setsallows you to assign settings to each telephone.
Linesallows you to assign settings to each trunk, external 
and target line.
Servicesallows you to...

140 / Programming
Compact ICS 6.1 Installer GuideP0603539  02
Entering programming for installers
1. Press ²¥¥‚¯öìéí which is the same as 
²¥¥ÛßßÜÝÝ. The display shows Password:.
2. Enter the Installer password. The default password is CONFIG 
(266344). The display shows
 Terminals&Sets ˆ. Three triangular 
indicators 
º appear on the vertical display between the rows of 
buttons.
3. Place the programming overlay over the buttons pointed to by the 
indicators 
º.
Entering programming for system...