Nortel Compact Ics 6.1 Installer Guide

Terminals&Sets / 151
P0603539  02Compact ICS 6.1 Installer Guide
Name
The default name for a telephone is its DN, but it can be changed to any 
combination of letters and numbers to a maximum length  of seven 
characters.
For more information, see the Compact ICS 6.1 System Coordinator Guide.
User prefernces
Any programming that can be done by users at their telephones can also be 
done in programming under 
User prefernces.
For more information, see the Compact ICS 6.1 System Coordinator Guide....

152 / Terminals&Sets
Compact ICS 6.1 Installer GuideP0603539  02
Restrictions
Restrictions prevent a user from making certain kinds of calls from a 
telephone or from lines that are available at the telephone, and restricts 
some features.
When you are finished programming restriction settings for one telephone, 
you can copy those settings to other telephones by using 
COPY at the 
Restrictions ˆ display. For more information about copying set 
programming, see Copying telephone programming on page...

Terminals&Sets / 153
P0603539  02Compact ICS 6.1 Installer Guide
Use ADD, the dialpad, and OK to program a restriction for each filter. 
Press 
‘ when the full restricted number is on the display (it 
shows 
Deny: and the number) to see any overrides to the restriction.
Use 
ADD, the dialpad, and OK to program one or more overrides for 
each restriction filter. 
Press 
ANY to enter a  wild card character that represents any digit in a 
sequence of numbers when denying numbers or creating overrides....

154 / Terminals&Sets
Compact ICS 6.1 Installer GuideP0603539  02
Filters 02, 03, and 04, although not preset with restrictions and overrides, 
are used as default filters in these programming headings.
FilterHeadingSub-heading
02Terminals&SetsSet restrns:
03LinesLine restrn:
04LinesRemote restrn:
Tip - Filter 00 cannot be changed.
Norstar can have up to 100 restriction filters (00 to 99).
Each programmable filter can have up to 48 restrictions. 
There is no limit on the number of overrides that can be...

Terminals&Sets / 155
P0603539  02Compact ICS 6.1 Installer Guide
Set restrns
Set restrictions allows you to assign a restriction filter to a telephone to 
prevent certain numbers from being dialed from that telephone. You can 
assign a different restriction filter for normal service and for each of six 
schedules. See the section on Services for more information about the 
schedules.
Use 
≠, CHANGE and the dialpad to enter the number of the 
restriction filter to be assigned to the set for each schedule....

156 / Terminals&Sets
Compact ICS 6.1 Installer GuideP0603539  02
Default filters for sets
This means, for example, that if you enter a set of restrictions for filter 11, 
they will be automatically applied when the Night schedule is in use.
Set lock
 Set lock controls the level of personal programming and customizing that 
can be performed at a telephone. Press 
CHANGE to select the type of set lock: 
None, Full, or Partial.
A full description of the levels of set lock is included in the Compact ICS 
6.1...

Terminals&Sets / 157
P0603539  02Compact ICS 6.1 Installer Guide
Allow link
A telephone can  be prevented from using Link (²àÚ), a host 
signaling option. Press 
CHANGE to select the setting: Y (Yes) or N (No).
Line/set restrns
Line/set restrns allows you to assign a restriction filter to a specific line that 
can be used for outgoing calls at a specific telephone. This type of filter 
replaces any line or set restriction filters which might otherwise apply. It 
restricts the numbers you can dial on a...

158 / Terminals&Sets
Compact ICS 6.1 Installer GuideP0603539  02
Telco features
Telco features program the way the Norstar works with features and 
services that are based in the public network or other outside source. 
Norstar is designed to work with two of these kinds of services: Call 
Display and an external voice message service.
When you are finished programming Telco features settings for one 
telephone, you can copy those settings to other telephones by using 
COPY 
at the 
Telco features ˆ...

Terminals&Sets / 159
P0603539  02Compact ICS 6.1 Installer Guide
Extl VMsg set
If you subscribe to a voice message service, you can access that service 
through your Norstar system. The external voice message setting controls 
where the indicator shows up when there is a voice message waiting on a 
particular line. The line must appear on that telephone. Press 
CHANGE to 
select the setting: 
N (No) or Y (Yes).
1st Display
Depending on the services you subscribe to, Call Display information may 
contain...

160 / Terminals&Sets
Compact ICS 6.1 Installer GuideP0603539  02
Log space
Log space determines the number of items that can be stored in the Call log 
for each telephone. Use 
≠, ADD and REMOVE to redistribute the log 
space. There is no log space assigned by default.
Tip - There must be space available in the log pool in 
order for you to add space to a Call log. The maximum 
number of spaces available is 250.
System-wide log space allocation is performed in Call log 
space under System prgrming. If...