Nortel Compact Ics 6.1 Installer Guide

Services / 191
P0603539  02Compact ICS 6.1 Installer Guide
Using dialing restrictions with routing
Routing service can be further customized by adding dialing restrictions to 
lines in line pools. Filters can restrict the use of the line to specific area 
codes. See the Networking features section of the Networking with Norstar 
on page 47, and Restrictions under both the 
Terminals&Sets and Lines 
programming sections for more information.
  Host system signaling codes
Tip - Host system signaling codes...

192 / Services
Compact ICS 6.1 Installer GuideP0603539  02
Common settings
Services share the settings for control telephones, schedule names and 
schedule times.
Control sets
A control telephone turns Services on and off for the lines and/or 
telephones assigned to it. 
You can assign several control telephones for your system. 
A control telephone for lines controls Ringing service, Restriction 
service and Routing service for its assigned lines. 
A control telephone with assigned telephones controls...

Services / 193
P0603539  02Compact ICS 6.1 Installer Guide
Schedules names
The schedule name is shown on the display of the control telephone when 
the schedule is turned on. It identifies the active schedule.
Use 
≠, CHANGE, ‘, and the dialpad to program the 
name.
A service can be turned on manually or automatically for 
all external lines and telephones controlled by a given 
control telephone, but you cannot combine schedules. In 
other words, a service can only be active as normal 
service or one of...

194 / Services
Compact ICS 6.1 Installer GuideP0603539  02
Schedule times
Schedule start and stop times are set at times you are most likely to want 
each service to be active. Use 
≠, CHANGE, ‘, and the 
dialpad to program the start and stop times for each schedule, on each day. 
Default schedule times
You can copy schedule times using 
COPY to make the programming easier. 
The following example shows how to program Night Schedule to start at 
5:00 p.m. on Monday through Friday, and end at 8:00 a.m. the...

Sys speed dial / 195
P0603539  02Compact ICS 6.1 Installer Guide
Sys speed dial
System speed dial allows you to create speed dial codes that can be used by 
any telephone in the system.
In CICS version 6.0 the number of system speed dial codes was increased 
to 255 (001 to 255). The user speed dial codes were adjusted to the 256-279 
range.
If you specify a name with the speed dial entry, an incoming call on a CLID 
line with a dialed number that matches the speed dial entry will display the 
name as...

196 / Passwords
Compact ICS 6.1 Installer GuideP0603539  02
Passwords
COS pswds
Class of Service (COS) passwords permit controlled access to system 
resources by both internal and remote users. When you enter a Class of 
Service password at a telephone, the restriction filters associated with your 
Class of Service password apply instead of the normal restriction filters. 
Similarly, when a remote user enters a Class of Service password on an 
incoming auto-answer line, the restriction filters and remote...

Passwords / 197
P0603539  02Compact ICS 6.1 Installer Guide
Pswd
Pswd defines the six-digit Class of Service password. There is no default 
password.
Use 
≠, CHANGE, and the dialpad to program the six-digit 
password. Use 
BKSP to edit numbers you have entered.
User flt
User filter allows you to assign a restriction filter to a Class of Service 
password. The user filter associated with the Class of Service password 
replaces any normally applicable set restriction, line/set restriction, and 
remote...

198 / Passwords
Compact ICS 6.1 Installer GuideP0603539  02
Call log pswds
This setting allows you to override any Call log password programmed 
with the Call log feature, and resets it to 
None. It is used when someone 
forgets a password. Press 
≠ and enter the DN of the telephone. 
Press 
≠ and then CLR to clear the programmed password.
Programming pswds
You can choose any combination of six digits for Passwords. It is easier to 
remember the password if the digits spell a word. 
Provide passwords...

Passwords / 199
P0603539  02Compact ICS 6.1 Installer Guide
SysCoord
The default System Coordinator password is 23646 (ADMIN).
Basic
The default Basic password is 22742 (BASIC).
IRAD pswd
The ability to do remote programming using the internal remote access 
device (I-RAD) is protected by a password. If your Feature Cartridge does 
come with the I-RAD enabled, the feature is not available until you enter 
Software Keys provided by Nortel.
Use 
CHANGE, the dialpad, and OK to change the I-RAD password....

200 / Passwords
Compact ICS 6.1 Installer GuideP0603539  02
Hospitality password
There are two passwords within the hospitality feature. One provides 
secure access to the administration set, and one provides secure access to a 
room condition setting from each room set for housekeeping staff.
Desk pswd
Change this password frequently, to maintain security.
At Hospitality:
1. Press 
≠.
2.
Desk pswd:4677 displays.
3. Press 
CHANGE. 
4.
New pswd: displays
5. Enter a new password, then press 
OK.
Cond pswd...