Nortel Compact Ics 6.1 Installer Guide

System prgming / 211
P0603539  02Compact ICS 6.1 Installer Guide
Change DNs
Change DNs allows you to change the directory number (DN) or internal 
number of a telephone.
Use 
≠and the dialpad to identify the DN you want to change 
(old DN). Use the dialpad to enter the new DN.
Changing DN locks programming session
Changing an individual DN locks the 
programming session into the Change DNs 
programming mode. After you have finished and 
have pressed 
¨, re-enter the programming 
access code and the...

212 / System prgming
Compact ICS 6.1 Installer GuideP0603539  02
Featr settings
Backgrnd music
Background music allows you to listen to music through your telephone 
speaker. A music source must be connected to the ICS. 
Press 
CHANGE to select the setting: N (No) or Y (Yes).
Refer also to External music source (customer supplied) on page 112.
On hold
On hold allows you to choose what a caller hears on an external line when 
the line has been put on hold. 
Press 
CHANGE to select the setting: Tones,...

System prgming / 213
P0603539  02Compact ICS 6.1 Installer Guide
Camp timeout
Camp timeout delay allows you to assign the number of seconds before an 
unanswered camped call is returned to the telephone which camped the 
call. 
Press 
CHANGE to select the setting: 30, 45, 60, 90, 120, 150, or 180 seconds.
Park timeout
Park timeout delay allows you to assign the number of seconds before a 
parked call on an external line returns to the originating telephone. 
Press 
CHANGE to select the setting: 30, 45,...

214 / System prgming
Compact ICS 6.1 Installer GuideP0603539  02
DRT to primeInstaller password required
Delayed Ring Transfer (DRT) automatically forwards unanswered external 
calls to a prime telephone, after a certain period of time. This helps ensure 
that no external call goes unanswered. 
Press 
CHANGE to select the setting: Y(Yes) or N (No).
DRT delayInstaller password required
DRT delay allows you to specify the number of rings before DRT transfers 
a call to a prime telephone. 
Press 
CHANGE to...

System prgming / 215
P0603539  02Compact ICS 6.1 Installer Guide
Remind delay
Held Line Reminder delay allows you to choose the number of seconds 
before the Held Line Reminder feature begins at a telephone that has an 
external call on hold. 
Press 
CHANGE to select the setting: 30, 60, 90, 120, 150, or 180 seconds.
Directd pickup
Directed pickup allows you to answer any calls by specifying the ringing 
telephone internal number. 
Press 
CHANGE to select the setting: Y(Yes) or N(No).
Page Tone
You can...

216 / System prgming
Compact ICS 6.1 Installer GuideP0603539  02
Page Timeout
The paging feature is automatically disconnected after a set length of time. 
Press 
CHANGE to select the maximum number of seconds needed for a page: 
15, 30, 60, 120, 180, 300, 600, 2700.
Daylight time
When this feature is turned on, the system will automatically switch 
between standard time and daylight saving time. 
Press 
CHANGE, to select the setting: Y (Yes) or N (No).
AutoTime&Date
The Automatic Time&Date feature...

System prgming / 217
P0603539  02Compact ICS 6.1 Installer Guide
This feature also allows the automatic changing between North American 
daylight savings and standard time. The Automatic Time and Date feature 
automatically overrides any manually programmed changes to the time and 
date in your system.
The year is not included with the time and date information and must be 
programmed manually if the current year differs from the network time.
Call log space
Call log space programming customizes how log...

218 / System prgming
Compact ICS 6.1 Installer GuideP0603539  02
Host delayInstaller password required
Host delay allows you to assign the delay between the moment an outgoing 
line is selected to make an external call (for example, by lifting the handset 
off the telephone) and the moment that Norstar sends dialed digits or codes 
on the line. Press
 CHANGE to select the setting: 200, 400, 600, 800, 1000, 
1200, 1400, 1600, 1800, or 2000 milliseconds.
Link timeInstaller password required
Link time...

System prgming / 219
P0603539  02Compact ICS 6.1 Installer Guide
Alarm set
Alarm set allows you to assign a telephone on which alarm messages 
appear when a problem has been detected in the system. 
Use 
CHANGE and the dialpad to enter the internal number of the Alarm 
telephone. Press 
CLR to set the Alarm telephone to None. The default 
setting is 21.
Set relocation
Telephone relocation allows you to move any telephone to a new location 
within the Norstar system without losing the directory number,...

220 / System prgming
Compact ICS 6.1 Installer GuideP0603539  02
Answer key
Up to eight answer DNs can be assigned per telephone. The Answer key 
setting in 
Featr settings allows you to determine what types of calls will 
alert at the telephone for the Answer DNs assigned to any telephone. 
Answer key changes do not apply to portables.
Press 
CHANGE to select the settings: Basic, Enhanced, and Extended. 
With the default 
Basic setting, answer keys do not ring for:
Prime set call capture
call...