Nortel Compact Ics 6.0 Installer Guide

System prgming / 221
P0992669 03Compact ICS 6.0 Installer Guide
Remote access pkgs
Use ≠ and the dialpad to select the remote access package you 
want to program. 
LinePool access
Press CHANGE to select the line pool access setting for each pool: N(No) or 
Y(Yes). 
Remote page
Press CHANGE to select the Remote page setting: N(No) or Y (Yes).
Remote admin
Press CHANGE to select the Remote administration setting: N(No) or Y 
(Yes).
Remote monitor
Press CHANGE to select the Remote monitor setting: N(No) or...

222 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Remote access packages defaults
ParameterSquarePBXHybrid
Package 00 Prohibits remote access to line pools, Page, 
remote monitoring and administration. Cannot be 
changed.
Package 01
Line pool accessY for Pool A
N for Pools B and C
Remote Page, 
administration & 
monitoringNo
Packages 02 - 15
Line pool accessN for Pools A to C
Remote Page, 
administration & 
monitoringNo
Tip - You can use COPY and the dialpad to copy settings 
from one...

System prgming / 223
P0992669 03Compact ICS 6.0 Installer Guide
I-RAD
The internal remote access device (I-RAD) can be programmed to answer 
an incoming call automatically. This allows you to set up remote 
administration without the help of someone on site. The I-RAD is an 
optional feature for some versions of the Compact ICS Feature Cartridge. 
If the I-RAD is not available, it can be enabled using software keys 
supplied by Nortel. See Software Keys on page 242 for more information.
Answer line
Press...

224 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Rec’d # lengthInstaller password required
The received number is used to identify the mapping of incoming calls to 
target lines, Auto DNs, and DISA DNs.The length of the number may be 
the same as the system DN length, or may be set to some other value 
because of network or central office constraints. Changing the Received 
number length clears all received digits programming for target lines.
To change the number of digits received on...

System prgming / 225
P0992669 03Compact ICS 6.0 Installer Guide
DN lengthInstaller password required
This feature allows you to change the number of digits for all DNs. The 
maximum length is seven. The default and minimum length is 2.
1. Press 
CHANGE to select the setting: 2, 3, 4, 5, 6, or 7. Press ‘ 
to save the new DN length. The display shows Drop data calls? 
Press YES to save the new DN length. NO restores the original value.
 
Do not change DN length immediately after a 
system startup.
You must...

226 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Changing DN length from two digits
The following scenarios indicate some of the consequences of changing or 
retaining the two-digit DN length.
1. A coldstart or upgrade to version 6.0 but retaining two-digit DNs
No Hunt groups or Hospitality Services
No Hunt group DNs
2. Change DN length from two digits to more than two using the Change 
DN length feature in System Prgming and choosing Yes to the ‘Drop 
all calls’ prompt 
or
Change DN...

System prgming / 227
P0992669 03Compact ICS 6.0 Installer Guide
DN length changed
Hunt groups and Hospitality services features are available
Hunt group DNs exist
3. Change DN length from three-digit length to more than three-digit 
length using the Change DN length feature in System Prgming and 
choosing Yes to the ‘Drop all calls’ prompt 
or
Change DN length from three-digit length to more than three-digit 
length using the Change DN length button in NRU and choosing Yes 
to the ‘Restrict access to...

228 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Calling Party Name with status of PRIVATE may be displayed on the 
Called Party set as Private name. If the incoming Calling Name is defined 
by the CO as a private name, then Private name appears on the answering 
set. If the Calling Party Name is unavailable it may be displayed on the 
Called Party set as Unknown name.
Receiving Redirected Name
Network name display allows the receiving of the Originally Called Name 
(Redirecting Name) on...

System prgming / 229
P0992669 03Compact ICS 6.0 Installer Guide
Fixed modem settings
Alarm reportingInstaller password required
The Alarm Reporting subheading will not appear unless your Feature 
Cartridge comes with remote administration enabled, or you have enabled 
the feature using software keys. See the I-RAD chapter and Software Keys 
on page 242 for more information.
The Norstar system can use the internal remote access device 
(I-RAD) to automatically send an alarm code to a remote location when...

230 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
If the call to the remote telephone number is not successful, the system will 
retry the call after a pre-programmed length of time. If the alarm code has 
not been transmitted after a pre-programmed number of retries, it will be 
cleared from the system. The alarm code which appears at the Alarm 
telephone and is recorded in the System test log is not affected by the 
Alarm reporting settings.
If there are multiple alarms and a backlog of...