Nortel Compact Ics 6.0 Installer Guide

System prgming / 201
P0992669 03Compact ICS 6.0 Installer Guide
Use ≠and the dialpad to identify the DN you want to change 
(old DN). Use the dialpad to enter the new DN.
Featr settings
Backgrnd music
Background music allows you to listen to music through your telephone 
speaker. A music source must be connected to the ICS. Press 
CHANGE to 
select the setting: N (No) or Y (Yes).
On hold
On hold allows you to choose what a caller hears on an external line when 
the line has been put on hold. Press...

202 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Handset volume
Handset volume allows you to specify whether the volume level of a 
handset or headset will return to the system default level when a call is 
ended or put on hold, or whether it will remain at the level set at the 
individual telephone. 
Use 
≠ and CHANGE to select the setting: Use sys volume or Use 
set volume.
Camp timeout
Camp timeout delay allows you to assign the number of seconds before an 
unanswered camped call is...

System prgming / 203
P0992669 03Compact ICS 6.0 Installer Guide
Trnsfr Callbck
Transfer Callback delay allows you to specify the number of rings before a 
Callback occurs on a transferred call. Press 
CHANGE to select the setting: 3, 
4, 5, 6, or 12 rings.
DRT to primeInstaller password required
Delayed Ring Transfer (DRT) automatically forwards unanswered external 
calls to a prime telephone, after a certain period of time. This helps ensure 
that no external call goes unanswered. Press 
CHANGE to...

204 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Held reminder
When active, Held Line Reminder reminds you that a call at your telephone 
is still on hold. You periodically hear two tones from your telephone until 
you return to the call on hold. Press 
CHANGE to select the setting: N(No) or 
Y(Yes).
Remind delay
Held Line Reminder delay allows you to choose the number of seconds 
before the Held Line Reminder feature begins at a telephone that has an 
external call on hold. Press 
CHANGE...

System prgming / 205
P0992669 03Compact ICS 6.0 Installer Guide
Page Timeout
The paging feature is automatically disconnected after a set length of time. 
Press 
CHANGE to select the maximum number of seconds needed for a page: 
15, 30, 60, 120, 180, 300, 600, 2700.
Daylight time
When this feature is turned on, the system will automatically switch 
between standard time and daylight saving time. Press 
CHANGE, to select 
the setting: Y (Yes) or N (No).
AutoTime&Date
The Automatic Time&Date feature...

206 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
The year is not included with the time and date information and must be 
programmed manually if the current year differs from the network time.
Press 
CHANGE to choose Y or N.
Call log space
Call log space programming customizes how log space is allocated to 
telephones in the system
Reset all logs?
Reset all logs allows you to re-allocate the Call log space equally to all 
telephones in your system.
Press 
YES and use the dialpad to enter...

System prgming / 207
P0992669 03Compact ICS 6.0 Installer Guide
Host delayInstaller password required
Host delay allows you to assign the delay between the moment an outgoing 
line is selected to make an external call (for example, by lifting the handset 
off the telephone) and the moment that Norstar sends dialed  digits or codes 
on the line. Press
 CHANGE to select the setting: 200, 400, 600, 800, 1000, 
1200, 1400, 1600, 1800, or 2000 milliseconds.
Link timeInstaller password required
Link time...

208 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
Alarm set
Alarm set allows you to assign a telephone on which alarm messages 
appear when a problem has been detected in the system. Use 
CHANGE and 
the dialpad to enter the internal number of the Alarm telephone. Press 
CLR 
to set the Alarm telephone to None. The default setting is 21.
Set relocation
Telephone relocation allows you to move any telephone to a ne wlocation 
within the Norstar system without losing the directory number,...

System prgming / 209
P0992669 03Compact ICS 6.0 Installer Guide
ringing service 
callbacks
The Enhanced setting is the same as the Basic setting except that answer 
keys will ring for overflow call routed calls (special case of Prime set call 
capture). Answer keys will not ring for line transferred calls (although 
Basic will ring).
Extended will ring for all call types except priority calls and voice calls.
Press 
CHANGE to select the settings: Basic, Enhanced, and Extended. 
Phantom DNs
A line can...

210 / System prgming
Compact ICS 6.0 Installer GuideP0992669 03
If you want the call to be available to be picked up by other members 
of the groups when you put a call on Hold, set 
Invoke by Hold: to Y. 
A flashing indicator appears beside an available  SWCA key when an 
incoming  call is put on Hold. 
If you want calls to remain on Hold only at the telephone where the call 
is received, set 
Invoke by Hold: to N. Even if you set this field to N, 
users can still put selected calls on SWCA hold, by...