Nortel Compact Ics 6.0 Installer Guide

Lines / 161
P0992669 03Compact ICS 6.0 Installer Guide
Full AutoHoldInstaller password required
Full AutoHold on idle line is a variation of the Automatic Hold feature. If 
you select an idle line, but do not dial any digits, that line is automatically 
placed on hold if you then select another line. Press 
CHANGE to select the 
setting: N(No) or Y (Yes).
The line you first selected is held until you press its button. The line is not 
available for use by anyone else.
Tip - An auxiliary ringer can be...

162 / Lines
Compact ICS 6.0 Installer GuideP0992669 03
LossPkgInstaller password required
Loss Package allows you to select the appropriate loss/gain and impedance 
settings for each line. The setting is based on the distance between the ICS 
and the terminating switch, and the terminating switch type. 
 The following table shows the available settings. 
A loss of 4 dB corresponds to a cable length of approx. 2700 m (9000 ft.).
Press 
CHANGE to select the setting: ShortCO, MediumCO, LongCO, 
ShortPBX or...

Lines / 163
P0992669 03Compact ICS 6.0 Installer Guide
Rec’d #Installer password required
The Received number setting applies only to target lines (line numbers 061 
to 086). It allows you to specify the digits which make a specific target line 
ring. The default value is None.
Use 
CHANGE, and the dialpad to program the digit string for each target line.
If busy
Target lines can be programmed to give a busy tone if all sets with 
appearances of the target line are engaged. Busy tone only works for BRI...

164 / Lines
Compact ICS 6.0 Installer GuideP0992669 03
Name
The default name for a line is ‘Line’ and its three-digit number (for 
example, Line001), but it can be changed to any combination of letters and 
numbers to a maximum length of seven characters.
For more information see the Compact ICS 6.0 System Coordinator Guide.
Restrictions
Preventing a user from using a line for making certain kinds of calls is done 
in Restrictions. For example, users should not be able to make long-
distance calls on...

Lines / 165
P0992669 03Compact ICS 6.0 Installer Guide
Line restrnsInstaller password required
Specify the filter to be applied to this line to restrict the numbers that can 
be dialed on it. You can assign a different restriction filter for normal 
service and for each of six schedules. See the section on Services for more 
information about the schedules.
Use 
≠, CHANGE and the dialpad to enter the number of the 
restriction filter to be assigned as the line restriction for each schedule. The 
default...

166 / Lines
Compact ICS 6.0 Installer GuideP0992669 03
Remote restrnsInstaller password required
Specify the restriction filter to be applied to remote callers calling in to the 
Norstar system on this line. A restriction filter is a set or group of 
restrictions and overrides. 
As with line restrictions, you can apply a different remote restriction for 
normal service and for each of six schedules.
Use 
CHANGE and the dialpad to program the remote restrictions for each 
schedule. The default...

Lines / 167
P0992669 03Compact ICS 6.0 Installer Guide
Telco featuresInstaller password required
VMsg center 1
If you subscribe to a voice message service, you can specify which voice 
message center is used for each external line that can receive message 
waiting indication. For each line, press 
CHANGE to select the setting: 1, 2, 3, 
4, 5, or N (None).
You enter the telephone numbers for each of the five voice message centers 
under the general Telco features heading. 

168 / Services
Compact ICS 6.0 Installer GuideP0992669 03
 Services
Using Services, you can control three types of service by the time of day 
and day of week:
alternate call ringing for certain times and days
alternate dialing restrictions for certain times and days
alternate call routing for certain times and days
Each of the three services has six schedules that you can customize. For 
example, you may want to combine alternate call ringing with alternate 
dialing restrictions for lunchtime,...

Services / 169
P0992669 03Compact ICS 6.0 Installer Guide
Ring Groups
Ring groups allows you to define groups of extended ringing sets. A group 
can be assigned to any line for any of the schedules. You can create up to 
100 ring groups. 
To define a ring group, use 
≠ and enter the number of the group 
you want to program (01-100). 
Once you define a ring group, the display will prompt you to enter the 
number of the set you want to assign to this ring group. You can use 
SCAN 
to display the sets that...

170 / Services
Compact ICS 6.0 Installer GuideP0992669 03
Trunk answer
Trunk answer allows you to answer, from any telephone, an external call 
that is ringing at another telephone in your office. This is useful if the other 
telephones have not been assigned the same lines as the telephone you are 
using to answer the call.
Press 
CHANGE to select the setting: Y(Yes) or N (No).
ExtraDial telephone
ExtraDial telephone allows you to assign an additional direct-dial 
telephone in the Norstar system for...