Nortel Compact Ics 6.0 Installer Guide

Programming / 121
P0992669 03Compact ICS 6.0 Installer Guide
Special characters on the display
When a heading ends with a triangle (ˆ), you can press ≠ to view 
the subheadings for that item. 
When a heading ends with an ellipsis (
…), you can press ≠ to see 
further information about that heading.
The indicators (
º ) on the programming telephone shows which buttons 
can be used at that programming step. The functions on these buttons allow 
you to move through the headings and subheadings of Norstar...

122 / Programming
Compact ICS 6.0 Installer GuideP0992669 03
Press DNs to see the specific extensions where programming changes have 
not been updated. Items will disappear from the list as they are updated, 
and 
UPDATE will disappear once all changes are complete.
Entering numbers
A line number must always be entered as a three-digit number. Line 
numbers from 1 to 8 must be entered with leading zeroes (for example, line 
003). 
Internal telephone numbers, also referred to as directory numbers (DNs),...

Programming / 123
P0992669 03Compact ICS 6.0 Installer Guide
3. Press ‘, then CHANGE to select which telephones will be 
programmed: 
Only equipped DNs, All set DNs. This is not 
necessary when copying to a single telephone.
4. Press
 ‘ and enter the internal number of the telephone that 
will be programmed or the internal numbers of the first and last 
telephone in a range. 
5. Press 
OK to proceed with the copy. This step is not necessary when you 
are copying to a single telephone.
You can also use...

124 / Programming
Compact ICS 6.0 Installer GuideP0992669 03
 
System Data which will be copied:System data which will NOT be 
copied:
Line access
• Line assignment
 Answer DNs (unless Answer 
button DN is same as set being 
copied to)
 Line pool access
 Prime line designation
 Number of intercom keys
 Outgoing line identification number
Restrictions
 Set restrictions
Set lock
 Allow Last Number Redial
 Allow Saved Number Redial
 Allow Link
 Line/set restrictions
Capabilities
 Allow redirect...

Programming / 125
P0992669 03Compact ICS 6.0 Installer Guide
Ring volume, User speed dial and CAP module memory button 
programming are not copied with User data.
User data which will be copied:User data which will be copied if 
destination set type is the same 
as the source set type:
Language choice
Ring type
Calls log options 
(Auto logging)
Display contrast
Dialing options (automatic, pre-dial, 
standard)
External autodial button 
assignments
Internal autodial button 
assignments
Programmable button...

126 / Profiles and Dialpads
Compact ICS 6.0 Installer GuideP0992669 03
Profiles and Dialpads
Use Profile programming to determine which types of trunks are 
supported, and which are supported on and off core.
Use Dialpad programming to define how your system will handle the 
letters Q and Z from the dialpad.
Profile programming
If your system is outside of North America, you may require a slightly 
different operating profile for your system. You must choose these 
parameters before you perform your...

Profiles and Dialpads / 127
P0992669 03Compact ICS 6.0 Installer Guide
Profile 1
This profile is the default profile. It supports cards and protocols for 
Canada and the United States. This profile has language support for 
English, Canadian French, and Spanish. The mu-law companding law is 
used in this profile.
Profile 2
This profile is for international systems that use ETSI ISDN lines with 
aLaw. The languages supported include: English, French, Spanish, and 
Turkish.
Profile 3
This profile provides...

128 / Profiles and Dialpads
Compact ICS 6.0 Installer GuideP0992669 03
Profile 4
This profile provides language support in English, French, and Spanish. 
This profile is for countries who use NI ISDN protocol with mu-law (i.e. 
some areas in the Caribbean).
2-port BRI-ST4-port BRI-ST
2-port BRI-ST
Supported Not supported
ETSI ISDN protocolPRI
muLaw companding lawUTAM
Loops are provisioned
T7000 telephone
Cards supported on-core Cards supported off-core
AnalogAnalog
T1E&M
PRIDID
4-port...

Profiles and Dialpads / 129
P0992669 03Compact ICS 6.0 Installer Guide
Changing the profile
If your system is in North America or you know that you want to run the 
North American profile, you do not need to run this program.
If you need to change the profile, follow these steps:
1. Enter the Profile access code from a programming set by pressing
 
²¥¥¸å¯ìéñä
(**7763453).
2. Enter the password, when prompted.
‚¯öìéí (266344)
3.
Region:PROF1 displays. Press the key below Change to scroll to 
another...

130 / Startup programming
Compact ICS 6.0 Installer GuideP0992669 03
Startup programming
After the hardware has been installed and powered up, use Startup to 
initialize the system and select the Startup template.
Performing Startup
1. Enter the Startup access code from a two-line display telephone 
dialpad by pressing
  which is the 
same as
 ²¥¥à¡Ûà¡¡à.
To be accepted, the Startup code must be entered no later than 15 
minutes after the Norstar system has been powered up and the 
telephone displays the...