NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual N1 – 433
Doc. No. 8201 - Release 1.0
July 2003
Key Function
1. Press the desired CO/PBX line key.
2. Press
Q.
3. Dial the Speed Dial buffer number (
00~II) with nested
buffer(s).
4. Use Handsfree Answerback or lift the handset, and talk with the
called party.
- OR -
Press the desired CO/PBX line key.
5. Press the desired Feature Access key or One-Touch key.
6. Use Handsfree Answerback or lift the handset, and talk with the...

July 2003 NEC Business Solutions Ltd
434 – N1Nesting Dial
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSRestrictions
	A maximum of 24 digits can be programmed into a Speed Dial buffer.
	A maximum of 22 digits can be programmed into a Feature
Access key.
	A maximum of 16 digits can be programmed into a One-Touch key.
General
	Each nested buffer reduces the amount of digits allowed in a Speed
Dial buffer by three.
	System and Station Speed Dial buffers can be nested into a Station
Speed Dial...

Features and Specifications Manual N2 – 435
Doc. No. 8201 - Release 1.0
July 2003
DRAFT 3
Night Call PickupN-2
FEATURE 
DESCRIPTIONThe Night Call Pickup feature functions when the system is in Night Mode
and an incoming call rings in. When the Night Chime is ringing, station
users are able to answer incoming calls by dialling the Night Call Pickup
Access Code or by pressing a Feature Access key programmed for Night
Call Pickup.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
ECR-U(...

July 2003 NEC Business Solutions Ltd
436 – N2Night Call Pickup
Doc. No. 8201 - Release 1.0
July 2003
General
	The Night Call Pickup Access Code is valid when any tenant is in the
Night Mode and the Night Chime Feature has been assigned for that
tenant in System Programming.
	When several incoming calls are ringing in at the same time, the
lowest numbered line is answered first.
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
N-3 Night Chime
N-4 Night Transfer
Order
and...

Features and Specifications Manual N3 – 437
Doc. No. 8201 - Release 1.0
July 2003
DRAFT 3
Night ChimeN-3
FEATURE 
DESCRIPTIONThe Night Chime feature provides a common audible tone signal with one
relay contact for control when incoming CO/PBX calls are received in Night
Mode. The relay contact closures may also be used for external bells or
chimes. The Night Chime feature is used after working hours to alert night
personnel of incoming outside calls.
SYSTEM 
AVAILABILITYTerminal Type
Not applicable....

July 2003 NEC Business Solutions Ltd
438 – N3Night Chime
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
N-2 Night Call Pickup
N-4 Night Transfer
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BPExternal Ring Relay Cycle Selection 1-7-07
¶+BN4ECR Relay to Tenant Assignment2-08
4When the system is at default this Memory Block...

Features and Specifications Manual N4 – 439
Doc. No. 8201 - Release 1.0
July 2003
DRAFT 3
Night TransferN-4
FEATURE 
DESCRIPTIONAttendant Positions (with or without Attendant Add-On Consoles) can place
the system in or out of Night Mode. This provides a change in the ring
assignment of CO/PBX lines, activates ANA Assignments, Night Call
Pickup, Night Chime, Code Restriction Class Assignments, and Automated
Attendant messages. This feature can operate system-wide or per tenant.
SYSTEM...

July 2003 NEC Business Solutions Ltd
440 – N4Night Transfer
Doc. No. 8201 - Release 1.0
July 2003
1. PressT.
2. Dial Access Code
HE.
3. Enter the Tenant number (
00~DG).
4. Press
T.
1. Press
T.
2. Dial Access Code
HE.
3. Enter the tenant number (
00~DG).
4. Press
T.
SERVICE 
CONDITIONSData Assignment
	The ability to set/reset Night Transfer is allowed or denied in Attendant
Class of Service selection.
	The system can be programmed to automatically switch to the Night
Mode (system-wide) at a specified...

Xen IPK Features and Specifications Manual
Features and Specifications Manual N4 – 441
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTSClass of Service (Attendant) Feature Selection 1 1-8-07 1-1, 1-2, 
¶+BTTStation to Class of Service Feature Assignment 4-17
¶+BTTTelephone to Tenant Assignment 4-09
¶+BTMLine Key Selection for Telephone Mode 4-12
¶+BTTCO/PBX Ring...

July 2003 NEC Business Solutions Ltd
442 – N4Night Transfer
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK