NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual L1 – 391
Doc. No. 8201 - Release 1.0
July 2003
Large LED IndicationL-1
FEATURE 
DESCRIPTIONAll Multiline Terminals are equipped with a Large LED to indicate incoming
calls or messages that have been sent from the Attendant or a Voice Mail
system.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
	Visual Indications for the Large LED include the following: 
	Calls are in the following priority...

July 2003 NEC Business Solutions Ltd
392 – L1Large LED Indication
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual L2 – 393
Doc. No. 8201 - Release 1.0
July 2003
Last Number RedialL-2
FEATURE 
DESCRIPTIONThe Last Number Redial feature is used to redial the last outside number
the user dialled by pressing the Redial key and 
L. This is useful when a
busy or no answer is received when trying to place a CO/PBX call.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
KEY FUNCTION
1. Press an idle CO/PBX/Tie line key.
2. Press
Q
3. Dial L....

July 2003 NEC Business Solutions Ltd
394 – L2Last Number Redial
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSData Assignment
	The Last Number Redial Access Code (default #) can be changed in
System Programming.
Restrictions
	Internal calls do not apply to this feature.
General
	Last Number Redial memory is protected by battery backup.
	Last Number Redial stores up to 24 digits (plus the Trunk
Access Code).
	The Access Code # is fixed in system software for use with the
Redial key.
	This...

Features and Specifications Manual L3 – 395
Doc. No. 8201 - Release 1.0
July 2003
Least Cost Routing (LCR)L-3
FEATURE 
DESCRIPTIONThe Least Cost Routing feature routes outside calls to the least expensive
route available. The MIFM-U( ) ETU and KMM( )UA provides cost effective
call routing based on the time of day, day of week, or holiday based on the
Central Office number dialled. This option minimises call costs by
automatically selecting the least expensive available connection for
outgoing calls....

July 2003 NEC Business Solutions Ltd
396 – L3Least Cost Routing (LCR)
Doc. No. 8201 - Release 1.0
July 2003
General
	LCR access is assigned per station in LCR Class Selection.
	LCR is programmed via a Personal Computer and diskette through the
MIFM-U(  ) ETU. This connection is the same as the PC programming
connection.
	Trunk Group Access Code (0 set as default) activates LCR at stations
assigned for LCR.
	LCR is based on the first eight digits dialled.
	When using Code Restriction with LCR, Code...

Xen IPK Features and Specifications Manual
Features and Specifications Manual L3 – 397
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BS4Card Interface Slot Assignment7-1
¶+BS4MIF (LCR) Assignment7-3-01
¶+BA4Access Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48101
¶+BTSClass of Service (Station) Feature Selection 2 1-8-08 3-4
¶+BTT4LCR Class Selection4-40...

July 2003 NEC Business Solutions Ltd
398 – L3Least Cost Routing (LCR)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual L4 – 399
Doc. No. 8201 - Release 1.0
July 2003
Live MonitoringL-4
FEATURE 
DESCRIPTIONXen Multiline Terminal users can listen to voice mail messages as the
message is being recorded by the XenMail VMS/FMS. The Live Monitoring
feature is password protected and can be used in automatic or manual
mode. When Live Monitoring is in use, the audio is played from the Multiline
Terminal Speaker. The terminal user can pick up the handset and speak to
the caller anytime during the...

July 2003 NEC Business Solutions Ltd
400 – L4Live Monitoring
Doc. No. 8201 - Release 1.0
July 2003
Press the Cancel soft key.
- OR -
Press the Live Monitoring feature access key.
Press the Live Monitoring Feature Access key.
Pick up the handset.
- OR -
Press 
P.
SERVICE 
CONDITIONSData Assignment
	The Live Monitoring feature key is required for feature operation. The
terminal user can assign the key on a Feature Access or One-Touch
key. Feature code for Live Monitoring is 07.
	Voice Mail must have Live...