NEC Xen Ipk Features And Specifications Manual

Xen IPK Features and Specifications Manual
Features and Specifications Manual I8 – 381
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
ISDN – PRI Installation
CO Line Service
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+ADMaster Clock Selection 1-8-33
¶+ANISDN DTMF Duration/Interdigit Selection 1-1-80
¶+ANPRT Channel Assignment 1-13-00
¶+ANPRT B Channel-to-Trunk Group...

July 2003 NEC Business Solutions Ltd
382 – I8ISDN-PRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
DID Line Service
Calling Party Number (CPN) Service
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCT4Trunk Type Selection3-91
¶+ALNDigit Add/Delete for Tie Line Networking 
Assignment5-00
¶+ALNDID Digit Length Selection 1-1-20
¶+ALNDID Digit Conversion Assignment 1-1-21
¶+ALNDID Digit Conversion Table 1-1-22
¶+ALNDID...

Xen IPK Features and Specifications Manual
Features and Specifications Manual I8 – 383
Doc. No. 8201 - Release 1.0
July 2003
Calling Party Number (CPN) Presentation from Station
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCT4Trunk Type Selection 3-91
¶+ANISDN Directory Number Selection 4-47
¶+AN4ISDN-PRI Directory Number Selection 4-62 

July 2003 NEC Business Solutions Ltd
384 – I8ISDN-PRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual I9 – 385
Doc. No. 8201 - Release 1.0
July 2003
ISDN Supplementary
ServicesI-9
FEATURE 
DESCRIPTIONThis feature allows a Multiline telephone user to access the various
supplementary services which may be available on your ISDN network. The
types of supplementary services which can be accessed are those which
can be activated using the Stimulus (Keypad) mode of operation. Consult
your ISDN service provider for further details.
SYSTEM 
AVAILABILITYTerminal Type
All...

July 2003 NEC Business Solutions Ltd
386 – I9ISDN Supplementary Services
Doc. No. 8201 - Release 1.0
July 2003
Before termination of the call;
1. Press 
TFBT, or the assigned feature access key.
If allowed in Class of Service, the MLT LCD displays MCT
INITIATED. However, if the facility is not subscribed within the
network, no call trace will result.
SERVICE 
CONDITIONSData Assignment
	Use Memory Block 1-8-08 (Class of Service (Station) Feature
Selection 2), Page 6: LK 4, to assign Supplementary Services...

Features and Specifications Manual I10 – 387
Doc. No. 8201 - Release 1.0
July 2003
I-Use IndicationI-10
FEATURE 
DESCRIPTIONThe I-Use Indication feature provides a green LED line key indication for the
line being used on Multiline Terminals. Other busy line keys are shown with
red LEDs. This quickly identifies the line being used by the station user.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	The indication...

July 2003 NEC Business Solutions Ltd
388 – I10I-Use Indication
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual K1 – 389
Doc. No. 8201 - Release 1.0
July 2003
Key Function/Multifunction 
Registration
K-1
FEATURE 
DESCRIPTIONThe system can be registered as either a Key Function (KF) or a
Multifunction (MF) telephone system. This feature is set via a switch on the
CPUI(  )-U(  ) ETU at the time of installation.
SYSTEM 
AVAILABILITYTerminal Type
Not applicable.
Required Components
CPUI(  )-U(  ) ETU
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
General
	When the system is set as KF,...

July 2003 NEC Business Solutions Ltd
390 – K1 Key Function/Multifunction Registration
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK