NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual M3 – 411
Doc. No. 8201 - Release 1.0
July 2003
Multiline Conference 
BridgeM-3
FEATURE 
DESCRIPTIONThe Multiline Conference Bridge allows any intercom or outside caller to
call the CNF(8)-U(  ) ETU to place a multiparty conference call. Each
CNF(8)-U( ) ETU supports one 8-party conference or two 4-party
conferences regulated by a switch setting. Up to two CNF(8)-U(  ) ETUs
may be installed. DSP based amplification provides a higher quality
conference call.
SYSTEM...

July 2003 NEC Business Solutions Ltd
412 – M3Multiline Conference Bridge
Doc. No. 8201 - Release 1.0
July 2003
1. Call the Conference Bridge extension number and wait for the voice
prompt.
2. Dial the default Supervisor Password (
KKKK), then L.
3. Skip options until the Customised Greeting option selected.
4. Follow the voice prompt and record a new Customised Greeting.
1. Call the Conference Bridge extension number.
2. When you hear the voice prompt, enter the Conference Bridge 1 or 2
password and...

Xen IPK Features and Specifications Manual
Features and Specifications Manual M3 – 413
Doc. No. 8201 - Release 1.0
July 2003
1. Call a trunk that is set as Automated Attendant.
2. Select the option for an extension connected to the Conference
Bridge.
3. When the voice prompt is heard, enter the Conference Bridge 1 or 2
password and press 
L.
4. Start the conference call.
1. Call the Attendant and ask to be transferred to an extension
connected to the Conference Bridge.
2. When the voice prompt is heard,...

July 2003 NEC Business Solutions Ltd
414 – M3Multiline Conference Bridge
Doc. No. 8201 - Release 1.0
July 2003
Restrictions
	The supervisor must perform the Setting Procedures before the
conference Bridge can be used.
	Up to 16 analogue voicemail ports are available. The CNF(8)-U(  )
ETU reduces this number by 8.
	Each CNF(8)-U( ) ETU reduces the number of stations and CAR
keys by 8.
	It is the characteristic of the network that audio losses of up to 6dB
may be experienced over analogue PSTN services,...

Features and Specifications Manual M4 – 415
Doc. No. 8201 - Release 1.0
July 2003
Multilingual LCD 
IndicationM-4
FEATURE 
DESCRIPTIONThe Multilingual LCD indication feature provides the option for English,
French, Spanish or Japanese characters on Multiline Terminals that have
an LCD. Language selection is made per station via System Programming. 
SYSTEM 
AVAILABILITYTerminal Type 
Multiline Terminals with LCD.
Required Components 
None.
OPERATING 
PROCEDURES 
SERVICE 
CONDITIONS
Data Assignment...

July 2003 NEC Business Solutions Ltd
416 – M4Multilingual LCD Indication
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual M5 – 417
Doc. No. 8201 - Release 1.0
July 2003
Multiple Trunk GroupsM-5
FEATURE 
DESCRIPTIONA maximum of 32 Trunk groups may be assigned. Each group can have a
separate Trunk Group Access Code. Assigning Trunk groups provides
access to different types of outside trunks. With Tenant Service, different
tenants can be programmed to access only their Trunk groups.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Lift the...

July 2003 NEC Business Solutions Ltd
418 – M5Multiple Trunk Groups
Doc. No. 8201 - Release 1.0
July 2003
General
	Dial Access is provided only on systems registered as Multifunction.
	At default, CO/PBX/ISDN lines 01~ 08 are assigned in Trunk Group 1,
all Tie lines are assigned in Trunk group 2, and all additional CO/PBX/
ISDN lines and DID lines are not assigned to a Trunk group.
	The system provides for 32 Trunk groups. Any number of trunks, up to
64, can be in a Trunk group.
	Trunks can be assigned to...

Features and Specifications Manual M6 – 419
Doc. No. 8201 - Release 1.0
July 2003
Multi-Zone Digital CordlessM-6
FEATURE 
DESCRIPTIONThe PHS Multi-zone Digital Cordless system is essential for busy people on
the move. Using a series of internally placed micro cellular repeater
stations, you can move around freely wi thin the workplace and always be in
contact, with no mobile call charges. Best of all, the super compact,
lightweight handset enables you to access all the main Xen IPK
communications...

July 2003 NEC Business Solutions Ltd
420 – M6Multi-Zone Digital Cordless
Doc. No. 8201 - Release 1.0
July 2003
CALL FORWARDING
When a D
term Drover is powered off or Out of Zone, a call directed to it is
forwarded to a VMS, and a message can be recorded to the VMS and
checked from the D
term Drover. The VMS can page the Dterm Drover
automatically after the Voice Mail message is recorded.
CALLING NAME DISPLAY - D
term Drover
When an incoming call is ringing, or a hold call terminates on the D
term
Drover,...