Home > NEC > Communications System > NEC Xen Ipk Features And Specifications Manual

NEC Xen Ipk Features And Specifications Manual

Here you can view all the pages of manual NEC Xen Ipk Features And Specifications Manual. The NEC manuals for Communications System are available online for free. You can easily download all the documents as PDF.

Page 381

Features and Specifications Manual I7 – 371
Doc. No. 8201 - Release 1.0
July 2003
ISDN-BRI Trunk 
ConnectionsI-7
FEATURE 
DESCRIPTIONISDN-BRI (Integrated Service Digital Network - Basic Rate Interface) is a
Public Switched Telephone Network (PSTN) service that provides two B
channels (2B + D) for voice call trunking. The B channels are used to
provide two CO/PBX type connections. Caller ID is a standard feature on
ISDN-BRI provided trunks. Caller ID indication displays the calling party
telephone number...

Page 382

July 2003 NEC Business Solutions Ltd
372 – I7ISDN-BRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
	Use Memory Block 3-72 (ISDN BRT Connection Configuration) to
assign the BRT Interface as Point to Point or Point to Multipoint
(default: Point to Multipoint).
	Use Memory Block 4-47 (ISDN Directory Number Selection) to specify
whether or not the directory number is presented to the network.
	Use Memory Block 4-62 (ISDN DID Directory Number Assignment) to
specify per station the outgoing Caller...

Page 383

Xen IPK Features and Specifications Manual
Features and Specifications Manual I7 – 373
Doc. No. 8201 - Release 1.0
July 2003
	For BRI firmware version 1.35 or higher, Malicious Call Trace is
possible provided the class of service is set in the system and is
subscribed with the Telstra Network. If only class of services is set in
Xen IPK, activating Malicious Call Trace does not mean it has
occurred in the Network.
	For BRI firmware version 1.63 or higher, access to network
Stimulus Mode supplementary...

Page 384

July 2003 NEC Business Solutions Ltd
374 – I7ISDN-BRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
CO Line Service
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+AD4Master Clock Selection1-8-33
¶+ANISDN DTMF Duration/Interdigit Selection 1-1-80
¶+ANISDN Dial Interval Time Selection 1-1-81
¶+BCTTrunk Internal Transmit Pad Selection 3-29
¶+BCTTrunk...

Page 385

Xen IPK Features and Specifications Manual
Features and Specifications Manual I7 – 375
Doc. No. 8201 - Release 1.0
July 2003
Calling Party Number (CPN) Service
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BSMIF (Caller ID) Assignment 7-3-04
¶+ AICaller ID Display Assignment for System Mode 1-1-78
¶+BTS4Class of Service (Station) Feature Selection 2 1-8-084-3, 4-4, 5-
7, 6-5
¶+BCTDIT...

Page 386

July 2003 NEC Business Solutions Ltd
376 – I7ISDN-BRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Page 387

Features and Specifications Manual I8 – 377
Doc. No. 8201 - Release 1.0
July 2003
ISDN-PRI Trunk
ConnectionsI-8
FEATURE 
DESCRIPTIONThis feature allows the system to connect directly to ESTI Primary Rate
ISDN Lines. The PRT(1)-U(  ) ETU is required for this facility and allows one
connection. Each Primary Rate ISDN connection carries up to 30 channels,
providing the system with a total of 30 outside trunks. The use of digital
ISDN lines enables voice calls to be made which take advantage of superior...

Page 388

July 2003 NEC Business Solutions Ltd
378 – I8ISDN-PRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
	Use Memory Block 3-91 (Trunk Type Selection) to specify each ISDN-
PRI trunk as CO or DID. CO sets ISDN trunks for CO services. DID
sets ISDN Trunks for DID services.
	Use Memory Block 3-29 (Trunk Internal Transmit Pad Selection) to
specify Internal Transmit volume level (default: 8 dB).
	Use Memory Block 3-30 (Trunk Internal Receive Pad Selection) to
specify Internal Receive volume level...

Page 389

Xen IPK Features and Specifications Manual
Features and Specifications Manual I8 – 379
Doc. No. 8201 - Release 1.0
July 2003
	Use Memory Block 1-8-08 [Class of Service (Station) Feature
Selection 2] Page 5 LK7 to allow (LED ON) or deny (default: LED Off)
display of both name and number. Page 4 LK4 selects the position of
the name or number on the display for the stations assigned to the
Class of service.
	Use Memory Block 4-17 (Station to Class of Service Feature
Assignment) to assign each station to...

Page 390

July 2003 NEC Business Solutions Ltd
380 – I8ISDN-PRI Trunk Connections
Doc. No. 8201 - Release 1.0
July 2003
Xen IPK Restrictions
	Two PRT(1)-U(  ) ETUs can be installed in a system.
	Up to 60 ISDN trunks (B Channels) can be assigned in a system.
	The PRT(1)-U(  ) ETU can be installed in any slot (1-8) in any cabinet
(1-3), except when more than 24 channels are assigned in which case
a free slot is required to be left to the right of the slot containing the
PRT card.
General
	Each PRT(1)-U(  ) ETU...
Start reading NEC Xen Ipk Features And Specifications Manual

Related Manuals for NEC Xen Ipk Features And Specifications Manual

All NEC manuals