NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual H6 – 351
Doc. No. 8201 - Release 1.0
July 2003
Hot LineH-6
FEATURE 
DESCRIPTIONThe Hot Line feature enables a station user to automatically dial an outside
number or another station when the station goes off-hook. This feature is
provided for Multiline Terminals and Single Line Telephones.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Go off-hook by lifting the handset or pressingP.
2. The station or outside number...

July 2003 NEC Business Solutions Ltd
352 – H6Hot Line
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BAAccess Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48001
101~ 132,
176~199,
201~232,
401~416
¶+BTT4Prime Line/Hot Line Assignment4-23
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual H7 – 353
Doc. No. 8201 - Release 1.0
July 2003
Howler Tone ServiceH-7
FEATURE 
DESCRIPTIONThe Howler Tone Service feature provides a Howler Tone when a station
remains off-hook after a call is completed or when a station is off-hook and
digits are not dialled in a predetermined time.
SYSTEM 
AVAILABILITYTerminal Type
All terminals.
Required Components
None.
OPERATING 
PROCEDURES
SERVICE 
CONDITIONS
	Howler tone occurs 30 seconds after a call has been disconnected or...

July 2003 NEC Business Solutions Ltd
354 – H7Howler Tone Service
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual I1 – 355
Doc. No. 8201 - Release 1.0
July 2003
I-Hold IndicationI-1
FEATURE 
DESCRIPTIONThe I-Hold Indication feature provides a green LED line key indication for
calls held at a Multiline Terminal. Calls held at other stations provide a red
LED line key indication. This feature allows easy identification of calls the
user placed on hold.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. PressU (the call is...

July 2003 NEC Business Solutions Ltd
356 – I1I-Hold Indication
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BMHold Recall Time Selection (Non-Exclusive Hold) 1-1-03
¶+BMHold Recall Time Selection (Exclusive) 1-1-63
¶+BMStation Transfer/Camp-On Recall Time Selection 1-1-12
¶+BMAttendant Add-On Console Transfer/Camp-On 
Recall Time Selection1-1-64 

Features and Specifications Manual I2 – 357
Doc. No. 8201 - Release 1.0
July 2003
Incoming Call 
IdentificationI-2
FEATURE 
DESCRIPTIONThe Incoming Call Identification feature identifies incoming calls on Multiline
Terminals with an LCD. Internal calls are identified by showing the caller
name and station number. A ringing Tie line/DID call generates a display on
the LCD of the line number.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals with LCD.
Required Components
None.
OPERATING...

July 2003 NEC Business Solutions Ltd
358 – I2Incoming Call Identification
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BCT4Trunk Name/Number Assignment3-00
¶+BTTStation Name Assignment 4-18
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual I3 – 359
Doc. No. 8201 - Release 1.0
July 2003
Intercom By-Pass CO CallI-3
FEATURE 
DESCRIPTIONThis feature allows a multiline telephone user to bypass a ringing trunk call
and make an intercom call instead when the station is assigned with ringing
line preference.
SYSTEM 
AVAILABILITYTerminal Type
Multiline Terminals.
Required components
None.
OPERATION 
PROCEDURE
1. Press ICM Key or dial T Pto obtain intercom dial tone.
2. Dial extension number.
SERVICE...

July 2003 NEC Business Solutions Ltd
360 – I3Intercom By-Pass CO Call
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK