NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual E5 – 311
Doc. No. 8201 - Release 1.0
July 2003
External Tone RingerE-5
FEATURE 
DESCRIPTIONThe External Tone Ringer provides a common audible tone signal with relay
contacts for control when incoming CO/PBX calls are received in Day and
Night Mode. The relay contact closures may be used for external bells or
chimes. When an Attendant is not available, station users may respond to
the external ring signal and answer incoming calls. This feature provides for
wide area...

July 2003 NEC Business Solutions Ltd
312  - E5External Tone Ringer
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BPGeneral Purpose Relay Assignment 1-8-37
¶+BN4ECR Relay to Tenant Assignment2-08
¶+BPExternal Ring Relay Cycle Selection 1-7-07
4When the system is at default this Memory Block must be programmed for the feature...

Features and Specifications Manual E6 – 313
Doc. No. 8201 - Release 1.0
July 2003
External Zone Paging 
(Meet-Me)E-6
FEATURE 
DESCRIPTIONThe External Zone Paging (Meet-Me) feature allows for up to three zones of
External Zone Paging plus All Zone External Paging. This feature allows the
user to locate personnel quickly using external paging. An external speaker
can be installed in a noisy area where a telephone would not be
appropriate. All Zone External Paging enables emergency announcements
to be made...

July 2003 NEC Business Solutions Ltd
314  - E6External Zone Paging (Meet-Me)
Doc. No. 8201 - Release 1.0
July 2003
1. Lift the handset.
2. Dial the Meet-Me Access Code (
EJ, if the page is an Internal/
External Page, or 
EL, if the page is only an External Page, as set
in default).
SERVICE 
CONDITIONSData Assignment
	After five minutes (default value for External Page timeout) a page
automatically disconnects.
	An alert tone to external speakers can be specified in System
Programming. The alert tone can...

Xen IPK Features and Specifications Manual
Features and Specifications Manual E6 - 315
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
B-2 Background Music Over External Speakers
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BSCard Interface Slot Assignment 7-1
¶+BAAccess Code (1-, 2-, or 3-Digit) Assignment1-1-46/47/
48074 ~
079,
081
¶+BTDAttendant Add-On...

July 2003 NEC Business Solutions Ltd
316  - E6External Zone Paging (Meet-Me)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK 

Features and Specifications Manual F1 – 317
Doc. No. 8201 - Release 1.0
July 2003
Feature Access – User 
ProgrammableF-1
FEATURE 
DESCRIPTIONThe User Programmable - Feature Access keys and One-Touch keys on
the Multiline Terminals can be used for System/Station Speed Dial and
many system features.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. PressT.
2. Press
Q.
3. Press the Feature Access key.
4. Dial 
A.
5. Dial the station number.
6. Dial...

July 2003 NEC Business Solutions Ltd
318 – F1 Feature Access – User Programmable
Doc. No. 8201 - Release 1.0
July 2003
1. PressT.
2. Press
Q.
3. Press the Feature Access key.
4. Dial 
A.
5. Dial the feature code
6. Press
T.
1. Press
T.
2. Press
Q.
3. Press the Feature Access key.
4. Dial 
L. (Lis used to indicate Tto the Xen IPK system.)
5. Dial the Feature Access Code.
6. Press
T.
SERVICE 
CONDITIONSData Assignment
	Feature Access keys and One-Touch keys are similar in purpose and
ability. Up to 16...

Xen IPK Features and Specifications Manual
Features and Specifications Manual F1 – 319
Doc. No. 8201 - Release 1.0
July 2003
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
D-12 Direct Station Selection
F-2 Flexible Line Assignment
N-1 Nesting Dial
O-3 One-Touch/Feature Access Key
S-10 Speed Dial – Station
S-12 Speed Dial – System
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BNLine Key Selection...

July 2003 NEC Business Solutions Ltd
320 – F1 Feature Access – User Programmable
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK