NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual F6 – 331
Doc. No. 8201 - Release 1.0
July 2003
Full Duplex HandsfreeF-6
FEATURE 
DESCRIPTIONThe HFU-U(  ) Unit is an add-on device to the DTU-Type Multiline Terminals
that provides full duplex speakerphone ability. An external microphone
is also provided with the HFU-U(  ) Unit. The microphone has a push-to-
mute control button that turns the microphone off when it is pushed and
held down.
SYSTEM 
AVAILABILITYTerminal Type
All DTU-Type Multiline Terminals
Required...

July 2003 NEC Business Solutions Ltd
332 – F6Full Duplex Handsfree
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BTM4HFU Selection 4-29
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual F7 – 333
Doc. No. 8201 - Release 1.0
July 2003
Full Handsfree OperationF-7
FEATURE 
DESCRIPTIONA built-in handsfree ability is included with all Multiline Terminals for internal
and outside calls. A MIC ON/OFF key or Feature Access Code allows the
microphone to be muted.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. PressT.
2. Dial 
A.
- OR -
3. Press the Flexible Line key assigned as a MIC ON/OFF key or...

July 2003 NEC Business Solutions Ltd
334 – F7Full Handsfree Operation
Doc. No. 8201 - Release 1.0
July 2003
SERVICE 
CONDITIONSGeneral
	One Override can be received during handsfree conversation.
	The microphone must be ON to answer calls handsfree.
	A Flexible Line key can be assigned as a MIC ON/OFF key, or a One-
Touch key can be programmed as a Microphone Control key.
	While engaged on an outside line conversation using the built-in
Handsfree Operation feature, the conversation may be interrupted...

Features and Specifications Manual G1 – 335
Doc. No. 8201 - Release 1.0
July 2003
General Purpose RelaysG-1
FEATURE 
DESCRIPTIONTwo relays located on the ECR-U(  ) ETU are designated for use as an
application dictates. These relays are either off or on, and do not change
state until a station user manually makes the change.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Attendant Add-on Console.
Required Components
ECR-U(  ) ETU
OPERATING 
PROCEDURES
1. Press the key assigned GPR0 or GPR1.
2....

July 2003 NEC Business Solutions Ltd
336  - G1General Purpose Relays
Doc. No. 8201 - Release 1.0
July 2003
To toggle the relay from on to off (or off to on):
1. Press 
T+0.
2. Dial the relay number
0 orA(for GPR0 or GPR1).
3. Press
T.
SERVICE 
CONDITIONS	The rating of the General Purpose relays are 24 Vdc at 500 mA.
	The red LED indication is provided to indicate on or off when the GPR
Access Codes are assigned to a Feature Access key.
	The LED indication is provided to all Feature Access keys and...

Features and Specifications Manual G2 – 337
Doc. No. 8201 - Release 1.0
July 2003
Group ListeningG-2
FEATURE 
DESCRIPTIONThe Group Listening feature allows user to press the Speaker key so others
in the room can listen to a conversation over the built-in speaker of a
Multiline Terminal. While Group Listening is active, the Multiline Terminal
user can continue to talk on the handset or headset.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1....

July 2003 NEC Business Solutions Ltd
338  - G2Group Listening
Doc. No. 8201 - Release 1.0
July 2003
	When the user goes on-hook during Group Listening, the call is
automatically placed in Handsfree Monitor/Speakerphone Mode and
Group Listening is cancelled.
	Off-hook ringing is provided with this feature.
	Camp-on tone and Tone Override are heard over the handset,
headset, or speakerphone.
	During Group Listening, speaker volume can be adjusted using
the Multiline Terminal volume control. The handset...

Features and Specifications Manual H1 – 339
Doc. No. 8201 - Release 1.0
July 2003
Handset MuteH-1
FEATURE 
DESCRIPTIONThe Handset Mute feature is provided to most terminals connected to the
Xen IPK system. While talking on the Multiline Terminal handset, a station
user can dial a feature code or press MIC button to mute the transmit
speech path. The station user can still hear the outside (or intercom) voice.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING...

July 2003 NEC Business Solutions Ltd
340 – H1Handset Mute
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK