NEC Xen Ipk Features And Specifications Manual

Features and Specifications Manual H2 – 341
Doc. No. 8201 - Release 1.0
July 2003
Handsfree AnswerbackH-2
FEATURE 
DESCRIPTIONEach Multiline Terminal is equipped with a microphone for Handsfree
Answerback during internal voice calls. Microphone status is indicated by a
MIC LED located on each Multiline Terminal. The MIC key or Feature
Access Code is used to mute the microphone to ensure privacy.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1....

July 2003 NEC Business Solutions Ltd
342 – H2Handsfree Answerback
Doc. No. 8201 - Release 1.0
July 2003
General
	Multiline Terminal MIC LED must be turned on.
	The calling station controls the voice announcement or ringing signal.
	Multiline Terminal users can receive voice calls from Single Line
Telephone users.
	Group Call Pickup and Call Forwarding do not operate for voice
announcement calls.
RELATED 
FEATURES LIST
GUIDE TO 
FEATURE 
PROGRAMMINGFeature 
NumberFeature Name
I-4 Internal Voice/Tone...

Features and Specifications Manual H3 – 343
Doc. No. 8201 - Release 1.0
July 2003
Handsfree Dialling 
and MonitoringH-3
FEATURE 
DESCRIPTIONThe Handsfree Dialling and Monitoring feature enables all Multiline Terminal
users to dial and monitor calls without using the handset. This feature frees
the user to perform other tasks while waiting for a call to be answered or
while on hold.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Press P.
2....

July 2003 NEC Business Solutions Ltd
344 – H3Handsfree Dialling and Monitoring
Doc. No. 8201 - Release 1.0
July 2003
	When a Multiline Terminal user lifts the handset, the monitoring
condition is automatically released, and the Speaker LED goes off.
	The Multiline Terminal must remain in monitor mode when Automatic
Redial is being used.
RELATED 
FEATURES LISTFeature 
NumberFeature Name
A-24 Automatic Hold 

Features and Specifications Manual H4 – 345
Doc. No. 8201 - Release 1.0
July 2003
Headset Connection 
(Built In)H-4
FEATURE 
DESCRIPTIONA headset can be connected directly to a Dterm Series i or DTU-type
Multiline Terminal. This eliminates the need for an external headset switch.
In addition, a headset ON/OFF key can be assigned to the terminal to allow
easy operation of the headset.
SYSTEM 
AVAILABILITYTerminal Type
All Multiline Terminals.
Required Components
None.
OPERATING 
PROCEDURES
1. Press the...

July 2003 NEC Business Solutions Ltd
346 – H4Headset Connection (Built In)
Doc. No. 8201 - Release 1.0
July 2003
GUIDE TO 
FEATURE 
PROGRAMMING
Order
and
Shortcut
System Data NameMemory 
BlockFunction
1-8-07
Attendant
Page-Line 
Key1-8-08
Station
Page-Line 
Key
¶+BNLine Key Selection 2-05
¶+BNLine Key Selection for Tenant 2-06
¶+BTM4Line Key Selection for Telephone Mode4-12
4When the system is at default this Memory Block must be programmed for the feature to be used. 

Features and Specifications Manual H5 – 347
Doc. No. 8201 - Release 1.0
July 2003
Hold With Recall 
(Exclusive & Non-
Exclusive)H-5
FEATURE 
DESCRIPTIONStation users can place a call on Hold, to free the station for other calls.
Multiline Terminal users can use Exclusive Hold (a held line can only be
picked up at the station that put the line on hold) and Non-Exclusive Hold (a
held line can be picked up at any station that has access to that line). Single
Line Telephone users place calls on Exclusive...

July 2003 NEC Business Solutions Ltd
348 – H5 Hold With Recall (Exclusive & Non- Exclusive)
Doc. No. 8201 - Release 1.0
July 2003
1. Momentarily press the hookswitch; the call is placed on Exclusive
Hold. If the handset is returned to the cradle, the call recalls
immediately.
2. To retrieve a held call, momentarily press the hookswitch; the held call
is connected.
- OR -
To retrieve a held call, return the handset to the cradle. 
3. When recall begins, lift the handset and the call is connected.
SERVICE...

Xen IPK Features and Specifications Manual
Features and Specifications Manual H5 – 349
Doc. No. 8201 - Release 1.0
July 2003
Hold Recall
	Provides a timed reminder to the user that a call was placed on hold.
	When a held line recalls, Multiline Terminals equipped with an LCD
receive the following information: the upper LCD line shows the
recalling outside line number, the lower LCD line shows the station
number the call was held at and the station number where the call was
transferred (used for recalling...

July 2003 NEC Business Solutions Ltd
350 – H5 Hold With Recall (Exclusive & Non- Exclusive)
Doc. No. 8201 - Release 1.0
July 2003
THIS PAGE INTENTIONALLY LEFT BLANK